Wind Energy Equipment In United Arab Emirates
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The Spartan™ EMD, a standardized EMD, provides exceptional support throughout the equipment’s entire life cycle. Benefits include: Standardized Product Configurations. Pre-Engineered Package Design. Expanded Power Range. Comprehensive Lifecycle product ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Pit Flares are generally selected and designed in order to combust a mixture of vapor and liquid from a single source. While most often designed to operate non-smokelessly, through use of Flare Industries’ various Pit Flare technologies, smokeless operation can often be achieved. The flare pit (or “Burn Pit”) is usually constructed of an excavation, lined with a non-combustible ...
-
Manufactured by Evapco Inc.based in USA
For steam cycles of 1 to 1000MW, EVAPCO-BLCT Dry Cooling can supply the Air Cooled Condenser that is right for your application. Irrespective of fuel source, biomass, fossil, or solar, an EVAPCO-BLCT Dry Cooling ACC can significantly reduce the water requirements of any power plant utilizing a steam ...
-
Manufactured by ERLPhase Power Technologies Ltd.based in CANADA
The S-PRO sub-harmonic protection relay protects generators, wind turbines, and SVC equipment from uncontrollable sub-harmonics which ...
-
Manufactured by Elecnorbased in SPAIN
Feasibility studies. Cost-finance analysis. Project administration procedures. Permitting and planning management. Construction and detailed engineering project design. Turnkey construction. Operation and maintenance. Operations ...
-
Manufactured by Elecnorbased in SPAIN
In wind energy, Elecnor has not only built numerous turnkey wind farms throughout Spain for various developers, but also acts as a developer and operator through its subsidiary ...
-
Manufactured by Coelmo spabased in ITALY
A generating set often works with an average load very low, especially if it is used in combination with a system of energy production from renewable resources (solar, wind, ...
-
Manufactured by Sungrow Power Supply Co., Ltd.based in CHINA
The equipment is compatible, with high safety margin: Inverting and boosting the pressure at the nearest location, reduce line losses. Multi-compartment design, adjustable platform center of gravity. Large effective buoyancy, high platform stability. High structural strength, large safety factor. Good resistance to wind/ wave/flow movement, safety of electrical equipment safety guarantee. ...
-
Manufactured by RainWise Inc.based in USA
The PVMet 330 is a complete monitoring experience with our full range of sensors to optimize PV power generation. The PVMet 330 includes an option for both a Global and Plane-of-Array Irradiance Sensor, one or two Back-of-Panel Temperature Sensor(s), an Ambient Air Temperature Sensor, a Wind Speed and Direction Sensor, a Relative Humidity Sensor, a Barometric Pressure Sensor, and a Rain Gauge ...
-
Manufactured by RainWise Inc.based in USA
The PVMet™ 500 delivers a customizable, multi-point monitoring solution that provides reliable energy management on any solar project. Choose up to three Irradiance Sensors and three Back-of-Panel Temperature Sensors along with three standard sensor options and an optional Ultra Sonic Anemometer, Mini Aervane, or Rain Gauge. Simple to install on any solar project, the PVMet 500 connects to ...
-
Manufactured by Sera GmbHbased in GERMANY
With sera power-to-gas compressor units, innovative system solutions can be created for converting renewable energy into hydrogen for use in a range of applications. Direct use of green hydrogen in mobility and transportation is just as feasible as buffering in storage facilities and direct supply into the natural gas grid or H2 pipelines. Power-to-gas energy storage can help to balance out ...
-
Manufactured by RainWise Inc.based in USA
The PVMet 200 is our best-selling commercial model featuring the highest caliber PV and wind sensors. The PVMet 200 includes an option for both a Global and Plane-of-Array Irradiance Sensor, one or two Back-of-Panel Temperature Sensor(s), an Ambient Air Temperature Sensor, and a Wind Speed and Direction Sensor. Simple to install on any solar project, the PVMet 200 connects to Modbus RTU ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you