Wind Energy Equipment Near Africa
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Electricity peaking stations, also called peak-lopping plants, are power plants designed to help balance the fluctuating power requirements of the electricity grid. Clarke Energy is able to offer a range of rapid response gas-fuelled power stations. These plants are ideally suited to peaking reserve, power and grid support ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Biogas peaking stations are biogas-fuelled energy generation stations that are powered by biogas or biomethane. Biogas is one of the few dispatchable renewable energy technologies. Whereby wind and solar energy generate when the wind blows or sun shines biogas can generate electricity on demand, if the fuel has been stored in advance. This means at peak times and to balance electricity demand and ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Battery energy storage systems (BESS) play an essential role in integrating and accelerating renewable energy deployment. By helping to balance energy supply with demand, Energy storage greatly improves the efficiency of renewable sources and allow maximal renewable energy penetration into the energy network. Energy storage can provide support services to the electricity grid, or to an individual ...
-
Manufactured by AYTON Clean Energybased in BURUNDI
Stand-alone solar/wind/hybrid systems can eliminate the need to build expensive new power lines to remote locations. For rural and remote applications, renewable energy can cost less than any other means of producing electricity. Renewable energy systems can also connect to existing power lines to boost electricity output during times of high demand such as on hot, sunny days when air ...
-
Manufactured by SRS Works Ltd.based in UNITED KINGDOM
The Solar & Battery powered Lamp posts are practical cost effective solutions where mains power cannot be provided, or the power is intermittent but lighting is critical for safety and security. The Solar & Batteries can also be used to power additional pole mounted devices such as CCTV cameras and wireless communications, air quality sensors and digital signage. Our special projects team ...
-
Manufactured by PV Hardware Solutions S.L.U. (PVH)based in SPAIN
Monoline 3H is PVH’s single-row single-axis tracker 60 meters long that holds three rows of modules placed horizontally (3L configuration). It is used in steep terrain where the intention is to minimize the movement of land and civil works. It is also used when the contour of the plot is irregular and therefore makes much better use of the available area. ...
-
Manufactured by PV Hardware Solutions S.L.U. (PVH)based in SPAIN
Guarantee the cost-effectiveness of your plant SolarFix: Robustness and resistance on site 100% module configuration adaptability, a standard 25-year structure warranty and wind tunnel ...
-
Manufactured by PV Hardware Solutions S.L.U. (PVH)based in SPAIN
Larger modules: Our Monoline solar tracker family, redesigned for Large-Format Ultra High-Power modules. LoRaWAN wireless communication: Long-range LoRaWAN wireless communication has very low power consumption, increased interference tolerance and sensitivity for receiving data. Bifacial modules: Compatible with and validated by major module suppliers. Panel rail designed for high-load and to ...
-
Manufactured by Elecnorbased in SPAIN
In wind energy, Elecnor has not only built numerous turnkey wind farms throughout Spain for various developers, but also acts as a developer and operator through its subsidiary ...
-
Manufactured by Elecnorbased in SPAIN
Feasibility studies. Cost-finance analysis. Project administration procedures. Permitting and planning management. Construction and detailed engineering project design. Turnkey construction. Operation and maintenance. Operations ...
-
Manufactured by Evapco Inc.based in USA
For steam cycles of 1 to 1000MW, EVAPCO-BLCT Dry Cooling can supply the Air Cooled Condenser that is right for your application. Irrespective of fuel source, biomass, fossil, or solar, an EVAPCO-BLCT Dry Cooling ACC can significantly reduce the water requirements of any power plant utilizing a steam ...
-
Manufactured by Sera GmbHbased in GERMANY
With sera power-to-gas compressor units, innovative system solutions can be created for converting renewable energy into hydrogen for use in a range of applications. Direct use of green hydrogen in mobility and transportation is just as feasible as buffering in storage facilities and direct supply into the natural gas grid or H2 pipelines. Power-to-gas energy storage can help to balance out ...
-
Manufactured by Resolute Marinebased in USA
A Wave2OTM system deployment typically employs several wave energy converters (WECs) that pressurize seawater which is piped ashore to directly drive a seawater reverse-osmosis (RO) desalination system. Wave2OTM systems include several proprietary innovations ...
-
Manufactured by Anakata Wind Power Resources Ltdbased in USA
Developed by Formula One aerodynamics and materials engineers, Anakata’s patented ‘Accelerator Technology’ and ‘microdownstream’ uses leading-edge technology to create a turbine that is more efficient than any other of its ...
-
Manufactured by Anakata Wind Power Resources Ltdbased in USA
The rotor is the first phase of the energy transformation process from kinetic wind energy into mechanical torque, and as such is where investment in technology should be maximised. Aerodynamics is overlooked by many wind turbine designers because they do not understand what is possible; as such they continue to use out-dated technology and design ...
-
Manufactured by RainWise Inc.based in USA
The PVMet 330 is a complete monitoring experience with our full range of sensors to optimize PV power generation. The PVMet 330 includes an option for both a Global and Plane-of-Array Irradiance Sensor, one or two Back-of-Panel Temperature Sensor(s), an Ambient Air Temperature Sensor, a Wind Speed and Direction Sensor, a Relative Humidity Sensor, a Barometric Pressure Sensor, and a Rain Gauge ...
-
Manufactured by RainWise Inc.based in USA
The PVMet™ 500 delivers a customizable, multi-point monitoring solution that provides reliable energy management on any solar project. Choose up to three Irradiance Sensors and three Back-of-Panel Temperature Sensors along with three standard sensor options and an optional Ultra Sonic Anemometer, Mini Aervane, or Rain Gauge. Simple to install on any solar project, the PVMet 500 connects to ...
-
Manufactured by RainWise Inc.based in USA
The PVMet 200 is our best-selling commercial model featuring the highest caliber PV and wind sensors. The PVMet 200 includes an option for both a Global and Plane-of-Array Irradiance Sensor, one or two Back-of-Panel Temperature Sensor(s), an Ambient Air Temperature Sensor, and a Wind Speed and Direction Sensor. Simple to install on any solar project, the PVMet 200 connects to Modbus RTU ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The Spartan™ EMD, a standardized EMD, provides exceptional support throughout the equipment’s entire life cycle. Benefits include: Standardized Product Configurations. Pre-Engineered Package Design. Expanded Power Range. Comprehensive Lifecycle product ...
-
Manufactured by S:FLEX GmbHbased in GERMANY
S:FLEX LEICHTmount RAIL 2.1 with extremely low surface load. The main advantages of the LEICHTmount RAIL 2.1 S/EW: System with General Technical Approval. Extremely low surface load and system installation without roof penetration possible. Low ballast due to systematic aerodynamic optimisation of the design. Foot plates attached with a click to the ground rails to protect the roof skin from ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you