Wind Energy Equipment Near Latin America
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Pit Flares are generally selected and designed in order to combust a mixture of vapor and liquid from a single source. While most often designed to operate non-smokelessly, through use of Flare Industries’ various Pit Flare technologies, smokeless operation can often be achieved. The flare pit (or “Burn Pit”) is usually constructed of an excavation, lined with a non-combustible ...
-
Manufactured by NovaLynx Corporationbased in USA
The 200-03002 Wind Sentry Anemometer and Vane are professional quality wind sensors which are suitable for a wide range of wind measurement applications. These moderately priced sensors are principally of thermoplastic construction providing excellent corrosion resistance, low sensor weight, and minimal parts count. In addition to being available as a set complete with crossarm, the sensors are ...
-
Manufactured by NovaLynx Corporationbased in USA
The 200-WS-23 Current Loop Wind Sensor monitors wind speed and direction. The electronics converts the raw signals from the wind sensors to proportional 4 to 20 mA current loop values for use by process control or monitoring systems. It acts like a variable resistance that draws 4-20 mA when powered with 8 to 30 Vdc. No external power is required because the encoding electronics for wind speed ...
-
Manufactured by RainWise Inc.based in USA
The PVMet™ 500 delivers a customizable, multi-point monitoring solution that provides reliable energy management on any solar project. Choose up to three Irradiance Sensors and three Back-of-Panel Temperature Sensors along with three standard sensor options and an optional Ultra Sonic Anemometer, Mini Aervane, or Rain Gauge. Simple to install on any solar project, the PVMet 500 connects to ...
-
Manufactured by RainWise Inc.based in USA
The PVMet 330 is a complete monitoring experience with our full range of sensors to optimize PV power generation. The PVMet 330 includes an option for both a Global and Plane-of-Array Irradiance Sensor, one or two Back-of-Panel Temperature Sensor(s), an Ambient Air Temperature Sensor, a Wind Speed and Direction Sensor, a Relative Humidity Sensor, a Barometric Pressure Sensor, and a Rain Gauge ...
-
Manufactured by RainWise Inc.based in USA
The PVMet 200 is our best-selling commercial model featuring the highest caliber PV and wind sensors. The PVMet 200 includes an option for both a Global and Plane-of-Array Irradiance Sensor, one or two Back-of-Panel Temperature Sensor(s), an Ambient Air Temperature Sensor, and a Wind Speed and Direction Sensor. Simple to install on any solar project, the PVMet 200 connects to Modbus RTU ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The Spartan™ EMD, a standardized EMD, provides exceptional support throughout the equipment’s entire life cycle. Benefits include: Standardized Product Configurations. Pre-Engineered Package Design. Expanded Power Range. Comprehensive Lifecycle product ...
-
Manufactured by DEWESoftbased in SLOVENIA
The Dewesoft solution can measure all the power quality parameters according to IEC 61000-4-30 Class A. In comparison to other power quality analyzers it’s possible to do more detailed analysis (e.g. raw data storing, behavior at faults, calculation of additional parameters ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 03301, manufacted by R. M. Young, is the wind vane included with our Wind Sentry Sets (03002, 03001). Although some customers have valid applications that require monitoring wind speed only (without direction), monitoring wind direction only (without wind speed) provides little useful information. For this reason, the 03301 is available for two purposes: As a replacement vane for a Wind ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 03002, manufactured by R. M. Young, measures wind speed and direction with a three-cup anemometer and a wind vane mounted on a small crossarm. It interfaces directly with your Campbell Scientific data loggers, so no signal conditioning is ...
-
Manufactured by Elecnorbased in SPAIN
Feasibility studies. Cost-finance analysis. Project administration procedures. Permitting and planning management. Construction and detailed engineering project design. Turnkey construction. Operation and maintenance. Operations ...
-
Manufactured by Elecnorbased in SPAIN
In wind energy, Elecnor has not only built numerous turnkey wind farms throughout Spain for various developers, but also acts as a developer and operator through its subsidiary ...
-
Manufactured by Eshia S.L.based in SPAIN
Not including regulator controller. The AERO350W AERO400W are special marine environments. The AERO400W with 5 blades is the quietest ...
-
Manufactured by ATB Riva Calzoni SpAbased in ITALY
A variable pitch controlled wind turbine with a 54 m rotor. Since installation of the first prototype in 1997, wind turbines with total capacity of over 20 MW have been installed with successful operation in Germany, Austria and Canada. The turbine is available in 50 m or 73 m hub heights. The towers are manufactured using the highest quality steel with a durable C5 protective outer coating to ...
-
Manufactured by ATB Riva Calzoni SpAbased in ITALY
The ATB 60.28 DD is an upwind, two-bladed wind turbine with 60 kW rated power at grid side. The turbine with its 28 m rotor diameter will is designed for wind class IIIA with 37m hub height in accordance with the Germanischer Lloyd’s Guideline for the Certification of Wind Turbines, Edition ...
-
Manufactured by Repowering Solutionsbased in SPAIN
Wind-diesel (WD) is a way to make continuous power supply from wind turbines and diesel engines. WD-systems are made to isolated off grid ...
-
Manufactured by Repowering Solutionsbased in SPAIN
The globalisation of the used wind turbine supply chain represents a risk . Certification of suppliers to the appropriate wind turbine quality management standard will ensure that suppliers maintain appropriate and robust management systems. The first-generation wind turbines can then be used in developing countries. Growing energy demand in developing countries stimulates the use of renewable ...
-
Manufactured by Repowering Solutionsbased in SPAIN
When an aerogenerator and an SPV system are interfaced, the power generation from these is mutually supplemented, and the resultant hybrid system offers a reliable and cost-effective electric supply in a decentralized mode. The wind-solar hybrid system mainly consists of one or two aerogenerators along with SPV panels of suitable capacity, connected with charge controller, inverter, battery bank, ...
-
Manufactured by Repowering Solutionsbased in SPAIN
Our initial market focus is on redeploying wind turbines in community wind projects throughout the Europe. Given the nascent nature of the refurbished wind markets we often develop our own projects, but prefer to work with other developers seeking a reliable solution to their community wind and/or net-meter project needs. With a lead-time of less than three-months, we hope developers will find ...
-
Manufactured by Jema Energy S.Abased in SPAIN
A Static VAr Compensator (or SVC) is an electrical device for providing fast-acting reactive power on high-voltage electricity transmission networks. SVCs are part of the Flexible AC transmission system device family (FACTS), regulating voltage and stabilizing the system. We provide a complete turnkey delivery of the project including civil works. Furthermore, we can also provide consultancy ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you