Only show results in Texas? Ok

Wind Energy Equipment

  • Climatronics - Model WE-2100 - Wind Energy Sonic Anemometer for Wind Turbine Control

    Specifically developed for wind turbine performance assessment and monitoring, Climatronics new, rugged, no moving parts, sonic anemometer provides the reliable wind speed and direction data so critical to efficient wind turbine operation. It is ideal for applications requiring high reliability, NO maintenance, ruggedness and/or ice-free ...

    By Climatronics Corporation based in Bohemia, NEW YORK (USA). from Sensors Product line

  • Nordex - Model N117 (2.4 Megawatt) - Wind Turbine

    The N117/2400 has been specially developed for low-wind sites. Thanks to a rotor diameter of 117 meters and a rotor sweep of 10,715 square meters, the N117/2400 is the highest-yielding IEC 3 turbine in its class. In typical low-wind regions, it will achieve a capacity of over 3,500 full-load hours, thus exceeding other turbines in this category by ...

    By Nordex SE based in Hamburg, GERMANY. from Wind Turbines Product line

  • Wind Energy

    The purpose of the CENER Wind Energy Department is to develop applied research activities and give technical advice in the field of wind energy, providing a service for all the sector players, such as: developers, manufacturers, certification authorities, financial institutions, users, associations and administrative bodies, both at home and ...

    By National Renewable Energy Centre (CENER) based in Sarriguren, SPAIN.

  • Permanent Magnet Generators

    At the heart of our 1KW Turbines is this Permanent Magnet Generator.  Using the very latest in rare earth magnets we are able to produce very high power outputs at low RPM levels, while achieving this from a PMG weighing only 7Kgs.  With a wide variety of uses, from wind and water turbines, to fuel-powered generators, we are offering ...

    By FuturEnergy Ltd based in Stratford upon Avon, UNITED KINGDOM.

  • CRC - Fixed Tilt Systems

    CRC Solar offers an industry proven Commercial Scale Fixed Tilt Ground Mount Racking System for use with both Crystalline and Thin Film modules. This racking system is designed to accept any size module, regardless of manufacturer, and is sized to meet your specific installation. Our design philosophy gives consideration to not only manufacturing ...

    By CRC Solar - Custom Rollforming Corporation (CRC) based in Moundridge, KANSAS (USA).

  • Model Xtreme+ - µc-Si Module

    Extreme modules designed for extreme conditions. High efficiency tandem (a-Si/µc-Si) technology. Higher radiance absorption rate, wider spectrum absorption. Ability to install facing multiple directions. Perform in diffused light & cloudy days Superior endurance to: Coast & farm environment; higher temperature Partial shading; snow, ...

    By NexPower Technology CORP based in Taichung City, TAIWAN.

  • EliTe - Model ET-P660BB - Black PV Module

    Industry-leading processing techniques realize great module efficiency to a maximum of 16.29%, steady power output guaranteed.

    By ET Solar based in Jianye District, CHINA. from Mainstream Modules Product line

  • EliTe - Model ET-M660WW - Mono PV Module

    Industry-leading processing techniques realize great module efficiency to a maximum of 17.83%, steady power output guaranteed.

    By ET Solar based in Jianye District, CHINA. from Mainstream Modules Product line

  • SolarWall - 2-Stage - High Performance Solar Air Heating

    SolarWall 2-Stage is the latest version of the SolarWall technology and is more suited to solar space heating applications. It builds on the technological success of the original solar air heating system, generating substantial economic and environmental benefits.

    By Conserval Engineering Inc. based in Toronto, ONTARIO (CANADA).

  • Green Vent - Model GVW - Wind Driven Ventilator

    High quality vertical vane wind driven turbine ventilators for commercial and residential applications that provides a low cost ventilation alternative.

    By SG Eco Industries based in Clark Freeport Zone, PHILIPPINES.

  • Whisper - Model 200 - Wind Turbine

    24, 36, 48V - 1000W,Kilowatt Hours/Month:Rotor Diameter:Voltage:Rated Power:Turbine Controller:Warranty:200 kWh/mo at 12 mph (5.4 m/s)9 ft (2.7 m)24, 36, 48 VDC (high voltage available)1000 watts at 26 mph (11.6 m/s)Whisper Charge Controller (included)5 year limited warranty

    By Barden UK Limited based in Hampshire, UNITED KINGDOM. from Wind Turbines Product line

  • Multi-Satellite Settings

    We use more satellites in both the first and second planetary stage. This solution brings the advantage of higher torque thanks to the uniform distribution of the tension in the annulus and pins compared to the conventional solutions, which use low number of planets.

    By Wikov Holding based in Plzeň, CZECH REPUBLIC. from Wind Turbine Product line

  • VENSYS - Model 1.5 MW - Gearless Wind Turbines

    Gearless and with permanent magnet technology instead of excitation power and gearbox losses. With an air-cooled generator and air-cooled VENSYS frequency converter for the most varied grid requirements.

    By Vensys Energy AG based in Neunkirchen / Wellesweiler, GERMANY. from Wind Turbines Product line

  • EuroCompact - Model MDED - Modular Vehicles for Road Transportation

    NICOLAS offers a wide range of modular vehicles for transporting loads on public roads. The product range comprises different model series of modular platform vehicles with various load capacities, platform heights and vehicle widths, also adaptable to the respective country-specific regulations. In order to optimize payloads, the focus of the ...

    By Nicolas Industrie S.A.S. based in Champs-sur-Yonne, FRANCE. from Modular Vehicles for Road Transportation Product line

  • Zenia - Model 30 kW - Wind Turbine

    Data transfer via GPRS. On-line surveillance of turbine. View your data on PC or smart phone. Easy installation and service.

    By Zenia-Energy A/S based in Ikast, DENMARK.

  • Norwin - Model 29-Stall-200 kW - Wind Turbine

    Nominal electric power: 200 kW. Power regulation: Stall. Rotor size: Diameter 29.1 m (95.4 ft). Rotor speed: 37.6 rpm at full load. Rotor:  Three blades placed upwind of tower. Swept area: 664 m2 (7145 ft2). Tilt angle: 5°. Coning angle: 0.

    By Norwin A/S based in Snoldelev, DENMARK.

  • Norwin - Model 29-Stall-225 kW - Wind Turbine

    Nominal electric power:  225 kW. Power regulation:  Stall. Rotor size:  Diameter 29.1 m (95.4 ft). Rotor speed:  37.6 rpm at full load. Rotor:  Three blades placed upwind of tower. Swept area:  664 m² (7145 ft2). Tilt angle:  5°. Coning angle:  0.

    By Norwin A/S based in Snoldelev, DENMARK.

  • KENERSYS - Model K120 2.3MW - Wind Turbine

    The K120 2.3MW is especially designed for IEC III sites. This turbine maximises the capacity factor up to 45% on a hub height of 145 meters.

    By KENERSYS GmbH based in Münster, GERMANY.

  • W2E - Model 93/2.0 - Wind Turbine

    Rated power: 2.05 MW. Rotor: 93 m. Wind class: IEC 2a. Cut-i wind speed: 3.5 m/s. Rated wind speed: 12 m/s. Cut-out wind speed: 25.0 m/s. Capacity factor*: 3,701 h, 42%. Sound power: 104.5 dB(A). Hub height tubular tower: 70 m | 85 m - 100 m. Drive trai concept - LARUS Compact: Mai gearbox i combinatio with torque bearing as a Plug & ...

    By W2E Wind to Energy GmbH based in Rostock, GERMANY.

  • Bora Energy - Model 200 kW - Wind Turbines

    Design Specification; Design Class: IEC Class 2. Max Avg. Wind Speed: 42.5 m/s.  Performance; Rated Wind Speed: 11 m/s. Operating Range: 3 - 25 m/s.

    By Bora Energy based in Wood Dale, ILLINOIS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you