Wind Energy Equipment
-
Manufactured by ENERCON GmbHbased in GERMANY
ENERCON wind energy converters run with a special storm control feature. This slows the wind turbine down so that it can continue to operate even at high wind speeds. Numerous shutdowns which lead to considerable losses in power output can thus be avoided. When storm control is activated, the rated speed is linearly reduced starting at a predetermined wind speed for each turbine type. Beginning ...
-
based in USA
For more than two decades Goldwind’s been setting a new standard in turbine technology. The Goldwind 2S PMDD platform, is part of that new standard. While the design principles of the Goldwind 2S MW and 1S MW remain much the same, one major difference between the two platforms is the single-bearing design of the 2S MW PMDD turbine. The 2S MW platform, a single rotor bearing solution, offers ...
-
Manufactured by AMPHYDRObased in USA
The most common method of voltage control for a hydro or wind based generating system is with a voltage sensing diversion controller. When the battery and loads are satisfied, any surplus energy must be diverted to a diversion load. Heating elements make the most reliable loads but other types of loads such as lighting can also be used. Some inverters and other charge controllers have auxiliary ...
-
Manufactured by Three Sixty Power Products Pvt Ltdbased in INDIA
Specially Designed for Frequent Cyclic Discharge Usage. Using Strong Grid & Specific Paste Plate. Battery Have 30% More Cyclic Life Time than Standby Series. Latest Deep Cycle Technology. Require Low Maintenance. Pollution Free Eco Friendly. Sealed Maintenance Free Operation. Exceptional Deep Discharge Recovery. Fast Charging. Not restricted for air transport-complies with IATA/ICAO Special ...
-
Manufactured by Wyssen Avalanche Control AGbased in SWITZERLAND
The Wyssen avalanche tower is designed to trigger avalanches proactively with remote-controlled blasting. To trigger an avalanche, a coded command is sent from the control center WAC.3® to the control system of the deployment box to initiate blasting. The deployment box contains either up to 12 explosive charges or 12 Wyssen 2K® charges for the LS12-5 and up to 24 Wyssen Wyssen 2K® ...
-
based in FINLAND
Energy storages are an essential part of modern energy systems. Polar Night Energy heat storages provide a way to be prepared for the clean energy transition and highly altering energy prices. ...
-
based in SOUTH KOREA
In November 2020, Doosan Enerbility signed a contract to build Korea’s first hydrogen liquefaction plant. Doosan will be handling the EPC work, as well as the operation & maintenance services for 20 years after the plant has been built. The plant, which is to be built on the grounds of Doosan Enerbility’s Changwon headquarters by 2022, will have the capacity to produce 5 tons of ...
-
Manufactured by Nikkohm.Co.,Ltdbased in JAPAN
Features and Applications 35W high power resistors in TO263 (D2-PAK) style surface mount mold package with matte Tin plated flange. Non-inductive design suits high frequency applications and high-speed pulse circuits. Low, 3.3°C heat resistance from resistor hot spot to flange and long life performance are presented with thin film metallization technology. Wide, 10 milliohm to 51K Ohm ...
-
Manufactured by Metal Deploye Resistorbased in FRANCE
High power electrical installations, for use by industrial direct currents , often generate disturbances on the networks. These disturbances will then modify the behavior of the sensors and trigger the electrical safety devices. To improve the quality of the signal and therefore the efficiency of the installations, the objective is to remove unwanted harmonics. A role played by filter ...
-
Manufactured by Van der Valk Solar Systems BVbased in NETHERLANDS
The ValkPro+ L10 South or East-West and the ValkPro+ P10 South or East-West have different foundation methods. For example, the systems can be mounted using rubber tile carriers, mass blocks, or consoles. Rubber tile carriers are easy to transport and install due to their low weight and soft structure and they also protect the roof surface. The advantage of mass blocks is that they can ...
-
Manufactured by DWC International Sales ApSbased in DENMARK
The Wind Vane is made of brass, and is therefore very impervious to weather. It can be delivered with heating units which ensure faultless function under extreme weather conditions. The Wind Vane can be configured to individual specifications. The system is frictionless, which gives very high accuracy. It is possible to replace the heating units externally without disassembling the Wind ...
-
Manufactured by Ryse Energybased in UNITED KINGDOM
3kW Small Wind Turbine for On-Grid, Off-Grid & Telecom ...
-
Manufactured by Fairwindbased in BELGIUM
Rotor weight: 6000 kg, Rotor diameter: 14,5 m, Blades lenght: 12,25 m, Swept area: 180 m², Height of the tower: 30 ...
-
Manufactured by Nova Sun Powerbased in CANADA
A wind turbine takes the energy from moving air mass and converts it mechanical or electrical energy. Micro wind turbines ...
-
Manufactured by LEONARDO Germany GmbHbased in GERMANY
ShearScout is a low level wind shear alert system designed to enhance the safety, regularity and efficiency of aviation in changing wind conditions. Wind shear encounters below an altitude of 1,000ft pose a serious threat to aircraft and may cause dangerous deviations from the intended flight path. The pilot has very little time or altitude to take evasive action. To reduce this threat, ...
-
Manufactured by Aerocompact GmbHbased in AUSTRIA
AEROCOMPACT G+ is the new east/west oriented ground mount system with up to 30% more modules on the same ground space. Designed with a 10° module tilt and elevated 40 cm off the ground from the lowest module point. As the south facing system the east/west can be installed with ground screws or ballast ...
-
Manufactured by Suneco Micro Hydro Powerbased in CHINA
If you are looking for Micro Pelton Turbine Manufacturers, you’ve come to the right place. We can provide price and quotation for different sizes of Micro Pelton ...
-
Manufactured by KRÁLOVOPOLSKÁ KOVÁRNA s.r.o.based in CZECH REPUBLIC
We supply parts for customers throughout Europe with a focus on meeting high quality requests with highest quality request. Our parts are primarily used in HYDRO power, THERMAL power, NUCLEAR power, STEAM turbine components, INSIDE / GEOTHERMAL power plants, CRITICAL applications and WIND and TIDAL ...
-
Manufactured by Energy Gain UKbased in UNITED KINGDOM
Energy Gain UK can: Design, Supply & Install the following Renewable Technologies. ...
-
Manufactured by Vistal Gdynia SAbased in POLAND
Istal Floating Turbine is a patent pending solution for offshore floating windmill farms created by Vistal Wind Power Sp. z o.o. VFT reduces the risk for assembly crew when installing the windmill in dangerous weather conditions. VFT reduces the stand-by time and the cost of transport of equipment when the windmill needs reparation. VFT gives access to deeper and more distant oceans areas where ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you