Small Wind Power Equipment For Wind Energy In Europe
-
Manufactured by Elecnorbased in SPAIN
In wind energy, Elecnor has not only built numerous turnkey wind farms throughout Spain for various developers, but also acts as a developer and operator through its subsidiary ...
-
Manufactured by W2E Wind to Energy GmbHbased in GERMANY
The light weight wind turbine technology provides turbines for various locations. The W2E-93/2.0 turbine is most suitable for standard wind conditions and the W2E-100/2.0 for low wind speed sites. Both stands for most efficient wind power plants in its ...
-
Manufactured by Britwind Limited - Part of Ecotricitybased in UNITED KINGDOM
State of the art small wind turbine engineered with robustness, high reliability and low maintenance in mind.Power Rating: 16kw. Typical Output: 18,000-65,000kwh (dependent on site ...
-
based in SPAIN
Hydroelectric power has been one of ACCIONA Energy’s activities since the company’s early days. It was initially part of a process of modernization and valorization of small hydro plants, and later developed into the construction of new plants. We therefore have considerable experience in this technology, both in terms of evaluating the water resource and in the design, construction, ...
-
based in DENMARK
Bringing new life to aging wind turbines. Wind turbine repowering is all about getting the maximum value from the initial investment. Replacing aging, generally smaller wind turbines and turbine parts with new and more efficient units leads to higher capacity and more efficient turbines, significantly increasing the amount of energy generated from a given wind farm. Power production increases as ...
-
Manufactured by TES VSETIN s.r.o.based in CZECH REPUBLIC
Synchronous generators have been optimized for outputs up to 30,000 kVA, they feature high efficiency and precise speed regulation. A new innovation is our generator with permanent magnets with outputs up to 4,000 kVA. Thanks to the progressive design, the machine is 30 % lighter than machines with a wound rotor. With excellent efficiency, easy installation and longer service intervals, the ...
-
Manufactured by Koncar-Generators and Motors Inc.based in CROATIA
The company manufactures low voltage synchronous generators for wind turbines up to 2.5 MW. Wind generators are purposed for direct connection with turbines. The generator excitation is static and is designed for grid-connection over a frequency ...
-
Manufactured by Soga Energy Team S.p.A.based in ITALY
Sogaenergies is the leader in Italy for the small wind industry. EV generators represent essential components to compete in international markets with technology and innovation for a better, green world. ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
Lattice and tubular towers of up to 30 meters height are available for ANTARIS small wind turbines.. All the masts have approved structural calculations and are delivered with foundation plans. In addition, the lattice masts provide the possibility of having a surface for advertising ...
-
Manufactured by Ram Environnementbased in FRANCE
To supply several engines that do not have the space to install the embedded version, or do not have the hydraulic force, but also to supply several Fog-Cannons TURBO-RAM during large demolitions operations, RAM Environnement has created a range groups of remote mixing. Then you only have to assemble the spray booms on the ...
-
Manufactured by TESVOLT GmbHbased in GERMANY
Can be flexibly expanded in 4.8 kWh increments Three different rack sizes Optimised for use with the SMA Sunny Island Flexible configuration and expansion possible, even years down the road Built to last 30 years or 8,000 full cycles 1C charging speed Utmost cell technology safety. ...
-
based in SWITZERLAND
nabla wind hub has introduced the concept of reblading wind turbine which represents not just the possibility to purchase unavailable spare components, often out of production when it comes to old turbine models, but the opportunity to increase the electrical output of the assets, reduce the OPEX, adopt a true Life Extension enabler. ...
-
Manufactured by Yelmotorbased in TURKEY
With engineering and elegance blended,ANKA is one of the most efficient small scale wind turbines ever created. Produces three phase alternating current. With the LED on top,it’s fit for night usage. With aerodynamically well designed third generation blades,starts at low speed winds. ...
-
Manufactured by Artesisbased in TURKEY
PCM monitors the condition of generators and their prime movers, effectively using the generator itself as a sophisticated transducer. It uses advanced NASA-developed technology to provide automated set-up and fault diagnosis with minimal user intervention. It is simpler to use and more cost effective than conventional systems. PCM is applicable to a very wide range of equipment, including turbo ...
-
based in SWEDEN
For establishment of single power plants or entire parks; we offer technical solutions for all types of projects based on our expertise and long ...
-
Manufactured by ENESSERE S.r.l.based in ITALY
Pegasus Wind Turbine represents the future for us at ENESSERE: a wind turbine that synthesizes environment and harmony, elegant design and customizable solutions. The goal is to reach total energy independence via a 100% Made in Italy wind turbine. A man-made technology, for men. The research we’re moving forward with lives in our desire to give tangible form to our vision for the future, ...
-
Manufactured by Innoventum ABbased in SWEDEN
Dalifant is a small wind turbine solution designed to yield maximum energy at a given rotor diameter. It is installed on a design-protected 20 metre wooden tower created by InnoVentum. The Dalifant is suitable for a variety of applications. It can provide electricity for an eco-farm, a larger house, a small-scale industrial site - power any appliances that require ...
-
Distributed by Wikov Holdingbased in CZECH REPUBLIC
Wind turbine uses synchronous generator bringing the benefits of connecting the wind turbine to the high-voltage ...
-
Manufactured by Leading Edge Turbines Ltdbased in UNITED KINGDOM
The LE-300 wind turbine, a compact and quiet horizontal axis turbine, is considered to be the most rugged reliable small wind turbine in its class. All at an affordable price! There are two versions to choose from: the LE-300 for off-grid home and industrial applications on land; and the LE-300 Marine, fully optimised for marine conditions. Manufactured in the UK, the LE-300 wind turbine ...
-
Manufactured by ENESSERE S.r.l.based in ITALY
Pegasus Wind Turbine represents the future for us at ENESSERE: a wind turbine that synthesizes environment and harmony, elegant design and customizable solutions. The goal is to reach total energy independence via a 100% Made in Italy wind turbine. A man-made technology, for men. The research we’re moving forward with lives in our desire to give tangible form to our vision for the future, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you