Small Wind Power Equipment For Wind Energy In Latin America
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
The feed-in converter smart!wind was designed by SPE especially for small wind turbines (SWT) with a power range from 5.5 to 20 kW. Besides the control functions for a SWT the smart!wind provides several protective functions supporting a safe operation of your SWT. Small hydro plants as well as CHP’s offer additional possible applications. Our feed-in converter is available in the following ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
Working grid feed in at 2.5 m/sec. wind speed after start up, depending on the repeller. Purpose built for inland areas with low untill moderate wind speed. From an average wind speed with 7.0 m/sec. we use a repeller with 5.8 m ...
-
Manufactured by Solartec S.A.based in ARGENTINA
Stand alone Solar Energy Generators basically consist of one or more photovoltaic modules, a supporting structure, a battery bank, a charge-regulator, and -if any- a direct to alternate current inverter. The photovoltaic modules transform solar light into direct current electric power. The supporting structure enables orientating the photovoltaic modules so as to optimize solar light ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
Permanent-magnet rotor, brushless, gearless, maintenance-free. Extremely strong permanent magnets for a high level of efficiency. (NdFeBo permanent magnets, resistent to temperatures up to 150° C). Special ball bearings for reliably taking up radial and axial forces. 3-phase current. Separate rectifier. Either direction of rotation. Voltage 0-1000 VDC. Start of feed-in at approx. 100 rpm. ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
Lattice and tubular towers of up to 30 meters height are available for ANTARIS small wind turbines.. All the masts have approved structural calculations and are delivered with foundation plans. In addition, the lattice masts provide the possibility of having a surface for advertising ...
-
Manufactured by Suzlon Energy Limitedbased in INDIA
Suzlon’s new S120 wind turbine generator, built on the highly successful 2.1 MW platform is set to improve the ROI for customers and a new benchmark in the wind industry. Wider rotor diameter of 120 metres with swept area of 11,225 sq. meters. Suitable for low wind sites IEC Class S. Next-generation controls with state-of-the-art software. All new individual pitch control ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
Working grid feed in at 2.5 m/sec wind speed after start up, depending on the repeller. Purpose built for inland areas with low untill moderate wind speed. From an average wind speed with 7.5 m/sec. we use a repeller with 4.0 m ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
Permanent-magnet rotor, brushless, gearless, maintenance-free. Extremely strong permanent magnets for a high level of efficiency. (NdFeBo permanent magnets, resistent to temperatures up to 150° C). Special ball bearings for reliably taking up radial and axial forces. 3-phase current. Separate rectifier. Either direction of rotation. Voltage 0-1000 VDC. Start of feed-in at approx. 100 rpm. ...
-
Manufactured by Suzlon Energy Limitedbased in INDIA
With the introduction of new 3 MW Series, Suzlon has yet again redefined the benchmark with S144, one of the largest wind turbine that will target India's relevant low wind regimes. 144m rotor diameter with a swept area of more than 16,618 sq. meters. 6 pole generator, proven DFIG technology, Water - Air cooling. Work platforms, covered entry from tower top, safety guards on all ...
-
Manufactured by Suzlon Energy Limitedbased in INDIA
Suzlon introduced the 2.6 to 3.0 MW platform to unlock unviable sites and deliver improved energy yield suitable for all wind regimes. 133m rotor diameter with a swept area of more than 13,070 sq. meters. New 6 pole generator. Smart pitching and innovative control features. Large single-piece rotor blade measuring 65 meter ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
The rotor blades have a computer-designed, aerodynamic profile and are manufactured by the hand lay-up method. The mix of glass fibre-carbon fibre laminate guarantees the highest quality standard at a reasonable price. A special tape is fixed to the leading edge to guarantee optimum edge protection. By using the same moulds for each different diameter, the blades are reproduced identically and ...
-
Manufactured by Elecnorbased in SPAIN
In wind energy, Elecnor has not only built numerous turnkey wind farms throughout Spain for various developers, but also acts as a developer and operator through its subsidiary ...
-
Manufactured by Repowering Solutionsbased in SPAIN
The globalisation of the used wind turbine supply chain represents a risk . Certification of suppliers to the appropriate wind turbine quality management standard will ensure that suppliers maintain appropriate and robust management systems. The first-generation wind turbines can then be used in developing countries. Growing energy demand in developing countries stimulates the use of renewable ...
-
Manufactured by DEWESoftbased in SLOVENIA
The Dewesoft solution can measure all the power quality parameters according to IEC 61000-4-30 Class A. In comparison to other power quality analyzers it’s possible to do more detailed analysis (e.g. raw data storing, behavior at faults, calculation of additional parameters ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
Permanent-magnet rotor, brushless, gearless, maintenance-free. Extremely strong permanent magnets for a high level of efficiency. (NdFeBo permanent magnets, resistent to temperatures up to 150° C). 3-phase current. Separate rectifier. Either direction of rotation. Voltage 0-400 V. Start of feed-in at approx. 145 rpm. Power: 2.700 watts at 380 rpm and 330 V. Evenly rising power curve. Weight: ...
-
Manufactured by ACOEM GROUPbased in FRANCE
The Envirologger Mini Gateway is based on the succesful Gen 2 Gateway but is designed for applications where only one single monitor or sensor type is required. The mini gateway supports serial inputs from a wide range of sensor types including RS232 / 485/ SDI-12, and analog inputs. The mini is IP65 rated and runs from low voltage DC supply from 5v to 20v, and as it is able to sleep in low power ...
-
Manufactured by Suzlon Energy Limitedbased in INDIA
The Suzlon S97-2.1 MW series is an award-winning wind turbine generator range which was specially designed to make low wind speed sites profitable. It was available in two variants: S97-90m - All steel tubular tower that reaches a height of 90m. S97-120m - All steel tower that combines the lattice and tubular structure with a unique transition piece that reaches a height of 120m. This innovative ...
-
Manufactured by Ingeteambased in SPAIN
The INDAR PMG series of generators, specially designed for the wind energy sector, comprises a wide range of cooling systems (with external water or air cooler), voltage levels and constructions. This series comprises the general product range of the wind energy industry in its most usual speed and power range. The core of the series, however, is the adaptation to the specific needs of the client ...
-
Manufactured by Suzlon Energy Limitedbased in INDIA
Suzlon boasts of a wide range within its 2.1 MW suite of products with varying rotor blade and tower heights suitable for all wind regimes. The S111 wind turbine has an impressive 111 rotor diameter, which can extract maximum power from available wind. S111 offers various hub height (90m, 120m, 140m) and construction (Steel Tubular, Hybrid Lattice, Hybrid Concrete) options depending upon site ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you