Only show results in Michigan? Ok

Wind Energy Applications

  • Premium

    Meteorological sensors for wind turbine control

    Higher, more robust, more reliable: Parallel to the growing requirements for wind turbines, the requirements for monitoring sensors grow as well. But how can wind sensor manufacturers fulfil these wishes? The ideal sensor has both a high degree of precision and a long, maintenance-free useful life under the most extreme of conditions. While mechanical anemometers were initially used in turbines, most producers around the world have since switched to ultrasonic anemometers without moving parts as part of their...

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Premium

    Restricting Birds and Wildlife -

    Prevent birds and wildlife from entering dangerous areas, as well as preventing mess and liabilities from animal mess. Bird-X products reduce and eliminate birds and wildlife from entering unwanted or dangerous areas for the good of all parties involved. Birds and animals are not harmed by Bird-X products - which are designed to make areas uncomfortable and unwelcoming to animals, forcing them to go elsewhere. Bird-X products have been developed since 1964, hold an excellent BBB rating, and we offer GSA Advantage....

    By Bird-X Inc. based in Chicago, ILLINOIS (USA).

  • Ammonit Wind Resource Assessment in Cold Climates

    For wind resource assessment campaigns in regions with long and cold winters, special measurement systems have to be designed. The challenges of cold climate regions should never be underestimated. Particularly icing is a problem. The met mast construction and the installed sensors have to be chosen carefully. The instruments have to be properly heated by a reliable power system. With our long-term experience in wind measurement and our local installation partners we can offer complete measurement systems robust...

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Environmental solutions for the wind energy industry

    Presto delivers economical and low maintenance options for stable gravel roads and staging areas with the GEOWEB and GEOTERRA load support systems. GEOWEB-confined gravel roads and pads are stronger and more stable using 50% less gravel or sand, and allow access across soft ground and low-lying areas. GEOTERRA construction mats support heavy loading without aggregate infill, yet require no specialized equipment. They are fast to deploy and safe to install for temporary access—and easy to remove after use...

    By Presto Geosystems based in Appleton, WISCONSIN (USA).

  • Wind Energy Meteorology

    As the world addresses the challenges of global warming green energy production and in particular wind energy generation has increased significantly. Biral can provide sensors for the control of aviation obstacle light intensity, wind speed measurement and site assessment. The Deutscher Wetterdienst (German Meteorological Service – DWD) has certified the VPF-710, SWS-100 and SWS-200 sensors as suitable for use in visibility controlled wind turbine obstruction light systems.

    By Bristol Industrial & Research Associates Ltd (BIRAL) based in Portishead, UNITED KINGDOM.

  • Wind monitoring for the wind energy industry

    By Scientific Sales, Inc. based in Lawrenceville, NEW JERSEY (USA).

  • Wind Turbine and Generator

    Stanford Magnets provide high quality neodymium magnets used in large scale in commercial wind turbines to ensure high energy-efficiency and good reliability for the whole generator systems.

    By Stanford Magnets based in Irvine, CALIFORNIA (USA).

  • On-demand renewable energy to assist solar/ wind microgrids

    Our Power Pallet biomass gasifier genset, when used with the grid-tie module, can be integrated with an existing 3-phase AC microgrid that includes intermittent electrical sources such as solar panels or small wind turbines.

    By All Power Labs based in Berkeley, CALIFORNIA (USA).

  • Wind power solutions for the off-grid systems sector

    Off-Grid Systems wind & solar-powered rural electrification hubs for easy deployment in the most remote sites.

    By XANT NV based in Brussels, BELGIUM.

  • Ammonit Wind Ressource Assessment Systems

    Prior to setting up a wind farm, the local wind conditions have to be measured for site assessment. The construction of a profitable wind farm demand the most accurate and reliable wind measurement technology. The installed equipment has to perform as precisely as possible as the data quality is essential for designing a reliable and economical wind farm. A small discrepancy in the evaluation of wind speed data drastically multiplies the discrepancy of the calculated wind power. Wind resource assessment systems...

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Engineering services for wind energy industry

    We offer expertise in the wind industry with experience at all scales of wind energy from micro turbines to offshore systems. As active members of the industry, we are represented on RenewableUK Standards Groups, IEC technical working groups and MCS working groups, developing standards and certification requirements for the industry.

    By Energy Technology Centre Ltd based in East Kilbride, UNITED KINGDOM.

  • Thermal structures insulation for power generation industry

    Whether you’re generating power for a single job site or hundreds of thousands people, power generation is a mission critical application. Thermal Structures products offer the extreme performance, durability and ease of installation that power generation requires.

    By Thermal Structures, Inc. based in Corona, CALIFORNIA (USA).

  • Photovoltaic power solutions for the wind power case sector

    Photovoltaic power solutions for the wind power case sector.

    By Anhui Leiton Electric Technology Co., Ltd. based in Hefei, CHINA.

  • Hydrokinetic Turbines for Energy efficiency management

    Predictable and reliable, hydrokinetic energy is a promising lever for the energy transition. HydroQuest has studied opportunities for hydrokinetic turbine development since 2010. Our ambition is to become a global reference in the development of innovative technology to harness hydrokinetic resources. This is a new alternative energy supply as promoted by the Energy Transition law to encourage renewable growth.

    By HydroQuest SAS based in Meylan, FRANCE.

  • Multiparameter Monitoring for the Renewable Energy Industry

    Site surveys for tidal, wave and wind based renewable energy projects will require instruments to measure standard physical parameters before, during and post installation.Fine tuning of the generating method is also reliant on data from sensor packages to maximise the source energy required for profitable installations.

    By Valeport Ltd based in Totnes, UNITED KINGDOM.

  • Limpet Wind Energy Solutions

    We are working with major turbine OEMs, energy utilities and technical service specialists to reduce operations and maintenance costs and increase availability of wind turbines through the deployment of Limpet safety systems. Key applications for Limpet® systems include:

    By Limpet Technology based in Edinburgh, UNITED KINGDOM.

  • Wind power solutions for the microgrids sector

    Microgrids state-of-the-art wind power with integrated storage and full controllability for the smartest of grids.

    By XANT NV based in Brussels, BELGIUM.

  • Fabrication solutions for the wind energy industry

    Modern wind turbines include a variety of components from BRÜCK. Our products are found in the power transmission in the form of bearings, flanges, gear and generator parts as well as in the pitch and gondola housing. Due to our vast depth in manufacturing and the enormous production capacity, we can cover the usual in the wind power industry requirements and high demands in the situation. Many global players in the wind energy sector benefit from BRÜCK proposed solutions for structural design of...

    By BRÜCK GmbH based in Saarbrücken-Ensheim, GERMANY.

  • Plate and Angle Roll and Automatic Rolling Systems for Wind Power

    DAVI 4 roll along with our exclusive “High Productivity Package” is the most widely purchased system by top wind tower manufacturers to produce their wind tower cylinders and cones, in semi-automatic mode, in as short as 10-15 minutes only, with one only operator.

    By DAVI - Promau Group based in Cesena, ITALY.

  • Glass Fabrics for Wind Energy

    STEKLONiT offers solutions for wind energy, one of the most promising sectors of electric-power industry. Thanks to inherent high quality, physical-mechanical properties, light weight, STEKLONiT’s glass fabrics are used in manufacture blades and tubes of wind power generators. Products can be manufactured according to a customer`s requirements and delivered to any place in the world.

    By Steklonit JSC based in Moscow, RUSSIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you