Wind Energy Applications in USA
-
Wind monitoring for the wind energy industry
By Scientific Sales, Inc. based in Lawrenceville, NEW JERSEY (USA).
-
Environmental solutions for the wind energy industry
Presto delivers economical and low maintenance options for stable gravel roads and staging areas with the GEOWEB and GEOTERRA load support systems. GEOWEB-confined gravel roads and pads are stronger and more stable using 50% less gravel or sand, and allow access across soft ground and low-lying areas. GEOTERRA construction mats support heavy loading without aggregate infill, yet require no specialized equipment. They are fast to deploy and safe to install for temporary access—and easy to remove after use for ...
By Presto Geosystems Distributor in Tampa, FLORIDA (USA).
-
Cellulosic Technology for General Biomass and Global Warming
General Biomass Company was founded in 1998 to do something about global warming. Since our founding, the General Biomass web site has carried information on global warming as a public service. This will now be focused on potential technology solutions and public policy. General Biomass needs and welcomes support from investors, partners and applicants to develop our own ability to contribute to solutions. Our area of expertise is cellulosic technology to make glucose and xylose from biomass. Glucose from ...
By General Biomass Company based in Evanston, ILLINOIS (USA).
-
Automatic fire detection and suppression solutions for wind turbine industry
Ensure your power generation equipment is protected from the dangers of flammable oils, hydraulic fluids, and short-circuits. Unlike buildings or industrial equipment, wind turbines can be very difficult to protect with traditional fire safety systems. Because wind turbines operate remotely, fires can go undetected. That means a fire extinguisher is not a viable option. Sprinkler systems don't make sense either, because they require a water source. Wind turbine fire suppression systems from Firetrace provide a ...
By Firetrace International LLC based in Scottsdale, ARIZONA (USA).
-
Robotic Technology for Offshore Wind & Renewables
ULC Robotics supports the wind and renewable energy market through the application of our advanced robotic and aerial technology across solar and wind energy, both on- and off-shore. By developing and implementing robotic systems, AI and Machine Learning models and other technologies, we are able to provide enhanced data analytics for improved reliability and lower ...
By ULC Technologies, LLC, part of SPX Technologies based in Hauppauge, NEW YORK (USA).
-
Ammonit Wind Resource Assessment in Cold Climates
For wind resource assessment campaigns in regions with long and cold winters, special measurement systems have to be designed. The challenges of cold climate regions should never be underestimated. Particularly icing is a problem. The met mast construction and the installed sensors have to be chosen carefully. The instruments have to be properly heated by a reliable power system. With our long-term experience in wind measurement and our local installation partners we can offer complete measurement systems ...
By Ammonit Measurement GmbH Distributor in San Jose, CALIFORNIA (USA).
-
On-demand renewable energy to assist solar/ wind microgrids
Our Power Pallet biomass gasifier genset, when used with the grid-tie module, can be integrated with an existing 3-phase AC microgrid that includes intermittent electrical sources such as solar panels or small wind ...
By All Power Labs based in Berkeley, CALIFORNIA (USA).
-
Feed-in tariffs while avoiding low price periods
Biomass energy from gasification, when done responsibly with waste wood or suitable agricultural waste such as nut shells, is often eligible for feed-in tariffs. However, biomass gasification has the advantage of being on-demand, so you can feed renewable energy onto the grid at times when wind and solar are not abundant, enabling you to avoid times when prices are too low due to an excess of wind or solar power being fed to the ...
By All Power Labs based in Berkeley, CALIFORNIA (USA).
-
Cast iron casting solutions for wind power industry
Cast iron casting solutions for wind power ...
By Calmet based in Wilmington, DELAWARE (USA).
-
Water analyzers for Power generation industry
Power generation is the process of converting / transforming primary energy sources (e.g. oil, natural gas, and hydro) into easy-to-use and easy-to-transport energy (secondary energy), e.g. electricity. For that purpose, there are several methods of generating electricity ...
By LAR Process Analysers - a brand by Process Insights, Inc. Distributor in , MASSACHUSETTS (USA).
-
Industrial gas detection solutions for wind turbines / power generation industry
DOD Technologies provides products in various applications that utilize, manufacture, or expel toxic, corrosive, and combustible gases. However, we also provide solutions outside of gas detection. Wind turbines utilize large blades propelled by the wind to generate renewable energy. One major challenge with wind is that it doesn’t come from the same direction every day. Therefore, wind turbines are fixed to rotating head that can optimize the collection of wind energy. This rotating head utilizes bearings to ...
By DOD Technologies Inc based in Cary, ILLINOIS (USA).
-
Ammonit Wind Ressource Assessment Systems
Prior to setting up a wind farm, the local wind conditions have to be measured for site assessment. The construction of a profitable wind farm demand the most accurate and reliable wind measurement technology. The installed equipment has to perform as precisely as possible as the data quality is essential for designing a reliable and economical wind farm. A small discrepancy in the evaluation of wind speed data drastically multiplies the discrepancy of the calculated wind power. Wind resource assessment systems ...
By Ammonit Measurement GmbH Distributor in San Jose, CALIFORNIA (USA).
-
Wind Turbine and Generator
Stanford Magnets provide high quality neodymium magnets used in large scale in commercial wind turbines to ensure high energy-efficiency and good reliability for the whole generator ...
By Stanford Magnets based in Irvine, CALIFORNIA (USA).
-
Floating Cover – Biogas/Agriculture
The Hexa-Cover Floating Cover is the optimum solution as a covering for almost any form of surface liquid, in i.e.: Biogas plants Biogas plants, Slurry tanks Slurry tanks for primarily pigs (but also cattle and poultry) for eliminating odor and emission ...
By Hexa-Cover A/S Distributor in Payson, ARIZONA (USA).
-
Wind monitoring for the offshore wind energy
By Scientific Sales, Inc. based in Lawrenceville, NEW JERSEY (USA).
-
Operational modal analysis software solution for wind energy sector
There are several reasons why ARTeMIS software for Operational Modal Analysis (OMA) is a popular tool in wind turbine ...
By Structural Vibration Solutions A/S Distributor in Pasadena, CALIFORNIA (USA).
-
Adhesive technology solution for renewable energies industry
The debate around the phase-out of nuclear power has highlighted it once again: there's no getting away from renewable energy. Improvements in efficiency and performance are the challenges that manufacturers must now face. And it is precisely here that the innovative adhesive technology from Lohmann plays an important role. The more reliably and efficiently components are connected, the longer-lived and more economical the overall system is – irrespective of whether energy is obtained from solar systems or ...
By Lohmann GmbH & Co.KG Office in San Jose, CALIFORNIA (USA).
-
Wind and Tidal Energy
Several technologies are being developed and utilized to effectively tap into several renewable energy sources available to us. Actuators form a big part of these innovations. The system components that employ advanced technologies rely on electric actuators to perform consistent, sustainable, and quick movements. These systems are being implemented in various sectors as well as various stages of energy production. Venture Mfg. Co. is responsible for providing exceptional quality actuators that provide reliable ...
By Venture Mfg. Co. based in Dayton, OHIO (USA).
-
Mid-level wind harvesting solutions for augmenting wind farms sector
With over 140 gigawatts available from building out already existing wind farms, Wind Harvesters could change the world of renewable energy as we know it. When fully developed, they would produce enough energy to power 280 million homes (using 5000 kWh per year), replacing 1000 coal-fired power plants. Our turbines can both add to the capacity of existing wind farms and increase the energy output of the existing ...
By Wind Harvest International, Inc. based in Sacramento, CALIFORNIA (USA).
-
Mid-level wind harvesting solutions for distributed energy production sector
Conventional energy supplies are more and more vulnerable to climate change-induced disruptions. Centralized power supplies and long transmission lines create a system where extreme weather events produce life-threatening power losses. The solution for many towns and high-energy using facilities lies in more distributed energy projects. Having medium-scale energy generation on-site or nearby eliminates the need for long transmission lines relying on centralized facilities to supply ...
By Wind Harvest International, Inc. based in Sacramento, CALIFORNIA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you