Wind Farm Equipment For Wind Energy Available In Asia & Middle East
-
Manufactured by ATB Riva Calzoni SpAbased in ITALY
A variable pitch controlled wind turbine with a 54 m rotor. Since installation of the first prototype in 1997, wind turbines with total capacity of over 20 MW have been installed with successful operation in Germany, Austria and Canada. The turbine is available in 50 m or 73 m hub heights. The towers are manufactured using the highest quality steel with a durable C5 protective outer coating to ...
-
Manufactured by Nordex SEbased in GERMANY
With the N149/4.0–4.5, the Nordex Group was the first company to launch a turbine platform with a flexible rating as part of its core design philosophy and operation strategy. This design approach, combined with a variety of operating modes, enables the Delta4000 turbine to adapt to the grid operator’s individual requirements, local wind conditions and noise ...
-
based in SOUTH KOREA
Doosan Enerbility is engaged in numerous power generation projects, including combined cycle power plant and wind farm projects, and we are involved in all the various stages of plant EPC projects, from project development to the design & engineering, equipment supply and construction work. ...
-
Manufactured by Seawind Ocean Technology Holding B.V.based in NETHERLANDS
Market-leading electricity and hydrogen technologies with higher performance, cost-efficiency, and sustainability. The Gamma 60 onshore two-bladed wind turbine (1.5 MW) has demonstrated the viability of Seawind’s patented technology (certified by DNV in December 2019). The next steps in the continuous validation of our technology is the construction of a Seawind 6.2 MW floating turbine to ...
-
Manufactured by Leviathan Energy LLC.based in USA
Leviathan’s new technology for aerodynamically enhancing wind flow to turbines enabled the development of the Wind Energizer™. This passive device increases both average power and revenues by around 20 to 40% of all large wind ...
-
Manufactured by ADES-Tempero Groupbased in SPAIN
The unique design of the ADES wind turbine includes three passive mechanical systems: a swivelling single-blade rotor, a pendulum power train and a selfsteering nacelle. The design compensates, accumulates and reinstates wind speed variations, preventing them from affecting the evenness of generator rotation and subsequently diminishing structural overload and power peaks caused by wind gusts. ...
-
by Hexiconbased in SWEDEN
Hexicon’s patented TwinWind™ technology is a gamechanger in the offshore wind industry. By utilizing two turbines on one foundation, TwinWind™ enables more power to be produced per sea area when compared to single-turbine systems. This further reduces the levelized cost of energy providing lower electricity prices for consumers whilst minimizing the impact on the environment ...
-
based in ICELAND
Despite being located in the North Atlantic and wind being a constant in the country, there has been only limited development of wind power project. A pilot project by the national power company Landsvirkjun set up two wind turbines with a combined capacity of 2 MW as an R&D project in 2013. With average capacity factor that is exceeding offshore numbers for wind parks elsewhere, it proves ...
-
Manufactured by Istikamet Dokum A.S.based in TURKEY
Providing EN GJS 450-10 cable protection systems and hang offs for wind farms in ...
-
Manufactured by Drax Groupbased in UNITED KINGDOM
Key facts: Drax Power Station provides 12% of the UK’s renewable power, providing a secure, reliable and flexible source of renewable energy to support more intermittent renewables, such as wind and solar. The site near Selby in North Yorkshire provides the most renewable power of any single location in the UK, some 14 terawatt-hours (TWh) or enough electricity to power the equivalent of ...
-
Manufactured by NoviOcean by NOVIGE ABbased in SWEDEN
Easy Produce, Install and Maintain;Simple Well Proven Parts, Modular Design, High Survivalbility. Environment; Low Visual and Audible Signature. Low Environmental Footprint. Cost Efficient; Weight tPower : ½ vs Offshore Wind. LCOE 1/3 vs start of Wind & Solar. Power TWeight Rati: 2-50 vs Wave Energy ...
-
Manufactured by Nclavebased in SPAIN
Nclave calculates, designs and manufactures solar trackers according to customers specifications and standards that apply in each country. Nclave uses the most advanced engineering calculation and simulation software approved by aerospace and automotive industry quality standards. Regarding our manufacturing, Nclave stands out for: High-volume manufacturing facility in Spain with highly qualified ...
-
based in USA
GE's 2.5 MW series wind turbine platform moves to a wider range of site applications by introducing the 2.85-100 and 2.85-103 wind turbines for increased customer value. GE's 50.2 meter proprietary blade design offers a 9%+ AEP increase over the 2.5-100. Focusing on performance, reliability, acoustic emissions, efficiency, and multi-generational product evolution, GE's 2.85-103 wind turbine ...
-
Manufactured by Shanghai Ghrepower Green Energy Co., Ltd.based in CHINA
A gearless permanent magnet direct drive WTGS designed with active pitch control technology. The WTGS adjusts its pitch proactively when it’s windy to ensure the stability of output power. Multi-level security with smart pitch regulation, mechanical brake, electromagnetic brake and active yaw systems. Full power inverter isolation technology, to ensure safe operation of the WTGS. Suitable ...
-
Manufactured by Nantong Rainbow Offshore & Engineering equipment Co., Ltd.based in CHINA
The wave compensation boarding device designed and made by ROC is the most advanced in China now. It is installed at the bow of “Dolphin 01” to compensate the waves for the operators’ safety while getting on and off the ...
-
Manufactured by Shuangdeng Group Co,Ltd (China Shoto)based in CHINA
SHOTO HTB series is a new product in the SHOTO battery family. This product has been designed for high temperature application, based on advanced technology. ...
-
Manufactured by Zhejiang Windey Co., Ltd.based in CHINA
3.XMW series wind turbines are constructed of mature and reliable upwind direction, horizontal axis, three-point support structure and adopt the variable-speed constant-frequency double-fed power generation technology. They are an affordable product developed in view of the characteristics of wind resources and environment in inland areas exposed to a medium or high wind speed. They are aimed to ...
-
Manufactured by NRG Systemsbased in USA
An advanced, 26-channel data logging system, SymphoniePRO is purpose-built for the renewable energy professional. As the newest data logger in the Symphonie series, SymphoniePRO brings significant upgrades in terms of capability and flexibility while building on the unparalleled foundation that is the Symphonie product line—a series of application-specific and user-friendly data ...
-
by Crestwingbased in DENMARK
Crestwing is working with leading scientists and PhD students at Aarhus University, Danish Technical University, Stanford, Harvard and Aalborg University on optimizing the system and the first Wave Energy Converter (WEC) pilot park. The pilot park is planned to begin commissioning in 2025. The supply chain is already in place, with, among others, ABB and Seaflex working closely with Crestwing. ...
-
based in USA
Designed for IEC Wind Class IIIs, GE’s 2.75-120 wind turbine features a 120-meter rotor in combination with the proven single-blade pitch control. The 2.75-120 offers the latest enhancements in load management controls, low acoustic emissions, efficient electrical power conversion and robust ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you