Wind Farm Equipment For Wind Energy In Asia & Middle East
-
Manufactured by Nordex SEbased in GERMANY
With the N149/4.0–4.5, the Nordex Group was the first company to launch a turbine platform with a flexible rating as part of its core design philosophy and operation strategy. This design approach, combined with a variety of operating modes, enables the Delta4000 turbine to adapt to the grid operator’s individual requirements, local wind conditions and noise ...
-
Manufactured by ATB Riva Calzoni SpAbased in ITALY
A variable pitch controlled wind turbine with a 54 m rotor. Since installation of the first prototype in 1997, wind turbines with total capacity of over 20 MW have been installed with successful operation in Germany, Austria and Canada. The turbine is available in 50 m or 73 m hub heights. The towers are manufactured using the highest quality steel with a durable C5 protective outer coating to ...
-
Manufactured by Leviathan Energy LLC.based in USA
Leviathan’s new technology for aerodynamically enhancing wind flow to turbines enabled the development of the Wind Energizer™. This passive device increases both average power and revenues by around 20 to 40% of all large wind ...
-
Manufactured by Shanghai Ghrepower Green Energy Co., Ltd.based in CHINA
A gearless permanent magnet direct drive WTGS designed with active pitch control technology. The WTGS adjusts its pitch proactively when it’s windy to ensure the stability of output power. Multi-level security with smart pitch regulation, mechanical brake, electromagnetic brake and active yaw systems. Full power inverter isolation technology, to ensure safe operation of the WTGS. Suitable ...
-
based in SOUTH KOREA
Doosan Enerbility is engaged in numerous power generation projects, including combined cycle power plant and wind farm projects, and we are involved in all the various stages of plant EPC projects, from project development to the design & engineering, equipment supply and construction work. ...
-
Manufactured by Nantong Rainbow Offshore & Engineering equipment Co., Ltd.based in CHINA
The wave compensation boarding device designed and made by ROC is the most advanced in China now. It is installed at the bow of “Dolphin 01” to compensate the waves for the operators’ safety while getting on and off the ...
-
Manufactured by Shuangdeng Group Co,Ltd (China Shoto)based in CHINA
SHOTO HTB series is a new product in the SHOTO battery family. This product has been designed for high temperature application, based on advanced technology. ...
-
Manufactured by Shenzhen Sinexcel Electric Co., Ltd.based in CHINA
SVG. wild the idea of using as a component, could compensate both inductive and capacitive loads to achieve PF 0.99 and avoid less and over ...
-
Manufactured by Zhejiang Windey Co., Ltd.based in CHINA
3.XMW series wind turbines are constructed of mature and reliable upwind direction, horizontal axis, three-point support structure and adopt the variable-speed constant-frequency double-fed power generation technology. They are an affordable product developed in view of the characteristics of wind resources and environment in inland areas exposed to a medium or high wind speed. They are aimed to ...
-
Manufactured by AMSC (American Superconductor)based in USA
Low voltage ride-through (RT) retrofit solution designed specifically for China. China’s rapid growth to become the world leader in wind power installations has created significant challenges related to low voltage ride-through (LVRT) capabilities. Today, a large number of wind turbines in China need to be retrofitted with a solution that is optimized to the needs of the Chinese grid. ...
-
Manufactured by EWT Holdings N.V. / EWT B.V.based in NETHERLANDS
With a 54-metre rotor and a range of tower heights, the DIRECTWIND 54 is the ideal choice for distributed energy generation in low wind (IEC class IIIA) sites where planning permission and tip-height restrictions apply. Thanks to EWT’s continuous market-driven innovation, the DW54 delivers higher yields than similar-sized turbines in the same wind class. Meanwhile, our direct drive ...
-
Manufactured by U-Protec Earthing Pvt. Ltd.based in INDIA
We Are Manufacturer, Supplier, Exporter Of Silver Back Fill Compounds From Pune, Maharashtra, India. We Provide Whole Range To ALL OVER THE WORLD; But We Majorly Targeted Customers From Maharashtra, India. Welcome to U-Protec Earthing Private Limited, your trusted provider of high-quality Silver Back Fill Compounds. We specialize in manufacturing and supplying premium earthing materials designed ...
-
Manufactured by ZX Lidarsbased in UNITED KINGDOM
Full IEC Classification, the longest service and warranty period as standard of any Lidar and accepted by DNV GL as a Stage 3 Bankable ...
-
Manufactured by Mingyang Smart Energy Group Co., Ltdbased in CHINA
CdTe thin film solar modules manufactured by Mingyang Smart Energy is the first PV product in China that was granted double certifications from CGC and VDE. Compared with c-Si solar modules, they generate more power in low irradiance, perform better in various weather conditions. They are safer, more friendly to environment, and have better appearance. They are widely used in solar farms, ...
-
Manufactured by Genus Innovation Limitedbased in INDIA
Genus Hallabol Tall Tubular Batteries are designed to give maximum power. Its plates are engineered to provide higher power while making sure battery price stays competitive. Like all our batteries, these too have Superb deep discharge recovery and charge acceptance make them ideal for a wide array of applications. From offices and stores to schools, hotels, shopping malls, petrol pumps and wind ...
-
Manufactured by Sinovel Wind Group Co., Ltd.based in CHINA
SL1500 series wind turbine adopts mature and reliable double-fed power generation technology with rotor diameter 70/77/82/90/93m and hub height 65/70/80/100m which can meet requirements of various onshore areas. There are over 8000 sets of SL1500 series turbines installed since the establishment of first Chinese MW level wind farm in 2006. This series of wind turbine has obtained certificates of ...
-
Manufactured by Nordex SEbased in GERMANY
The N117/2400 has been specially developed for low-wind sites. Thanks to a rotor diameter of 117 meters and a rotor sweep of 10,715 square meters, the N117/2400 is the highest-yielding IEC 3 turbine in its class. In typical low-wind regions, it will achieve a capacity of over 3,500 full-load hours, thus exceeding other turbines in this category by 20 percent. This translates into a capacity ...
-
Manufactured by DMT GmbH & Co. KGbased in GERMANY
WindSafe® is DMT’s machine diagnostic system specially designed for use in wind power plants. The system is based on the new, powerful IoT monitoring platform SafeGuard. The hardware and software is specially adapted to the condition monitoring (CM) requirements of wind power plants. The hardware boasts an operating temperature range of -40 °C to +65 °C, qualifying the system ...
-
Manufactured by Sinovel Wind Group Co., Ltd.based in CHINA
SL5000/SL6000 series wind turbine adopts mature and reliable double-fed technology and compact drive train; based on SL3000 offshore experience, this series wind turbine has also applied many patents like large components self-maintenance, anti-salt corrosion. Rotor diameter 128/155m and hub height 100/110m, applicable to the installation requirements of onshore, offshore and intertidal. This ...
-
Manufactured by Zhejiang Windey Co., Ltd.based in CHINA
The WM series smart condition monitoring system independently developed by Windey mainly covers WM.Smart 1 wind turbine drive chain monitoring system, WM.Tower 1 tower safety and foundation uneven settlement monitoring system, WM.Blade 1 blade health monitoring system, WM.Oil 1 oil quality monitoring system, WM.Bolt 1 bolt condition monitoring system and monitoring systems for other functions. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you