Wind Farm Equipment For Wind Energy In Europe
-
Manufactured by Elecnorbased in SPAIN
Feasibility studies. Cost-finance analysis. Project administration procedures. Permitting and planning management. Construction and detailed engineering project design. Turnkey construction. Operation and maintenance. Operations ...
-
Manufactured by Elecnorbased in SPAIN
In wind energy, Elecnor has not only built numerous turnkey wind farms throughout Spain for various developers, but also acts as a developer and operator through its subsidiary ...
-
by Geodesysbased in UNITED KINGDOM
The Energy and Infrastructure Report is a risk screening report designed to assess the impact of new infrastructure projects on a property. It provides risk assessment for a number of different energy and infrastructure aspects in a single product. These include screening information on drilling locations and land blocks which are licensed for oil and gas exploration (including fracking), ...
-
Manufactured by ATB Riva Calzoni SpAbased in ITALY
A variable pitch controlled wind turbine with a 54 m rotor. Since installation of the first prototype in 1997, wind turbines with total capacity of over 20 MW have been installed with successful operation in Germany, Austria and Canada. The turbine is available in 50 m or 73 m hub heights. The towers are manufactured using the highest quality steel with a durable C5 protective outer coating to ...
-
Manufactured by Nordex SEbased in GERMANY
With the N149/4.0–4.5, the Nordex Group was the first company to launch a turbine platform with a flexible rating as part of its core design philosophy and operation strategy. This design approach, combined with a variety of operating modes, enables the Delta4000 turbine to adapt to the grid operator’s individual requirements, local wind conditions and noise ...
-
based in SOUTH KOREA
Doosan Enerbility is engaged in numerous power generation projects, including combined cycle power plant and wind farm projects, and we are involved in all the various stages of plant EPC projects, from project development to the design & engineering, equipment supply and construction work. ...
-
Manufactured by Seawind Ocean Technology Holding B.V.based in NETHERLANDS
Market-leading electricity and hydrogen technologies with higher performance, cost-efficiency, and sustainability. The Gamma 60 onshore two-bladed wind turbine (1.5 MW) has demonstrated the viability of Seawind’s patented technology (certified by DNV in December 2019). The next steps in the continuous validation of our technology is the construction of a Seawind 6.2 MW floating turbine to ...
-
Manufactured by Nclavebased in SPAIN
Nclave calculates, designs and manufactures solar trackers according to customers specifications and standards that apply in each country. Nclave uses the most advanced engineering calculation and simulation software approved by aerospace and automotive industry quality standards. Regarding our manufacturing, Nclave stands out for: High-volume manufacturing facility in Spain with highly qualified ...
-
based in USA
GE's 2.5 MW series wind turbine platform moves to a wider range of site applications by introducing the 2.85-100 and 2.85-103 wind turbines for increased customer value. GE's 50.2 meter proprietary blade design offers a 9%+ AEP increase over the 2.5-100. Focusing on performance, reliability, acoustic emissions, efficiency, and multi-generational product evolution, GE's 2.85-103 wind turbine ...
-
Manufactured by Windmaster Technologies A.S.based in NORWAY
RADAR turbulence and wind profiler for offshore and onshore wind park operations. Our specially designed radar units are easily retrofitted to wind towers near the base (both offshore and onshore). Several units working together make an Invisible Met Mast™, where we automatically analyse the forward-scattered radar signal to directly-measure 3D turbulence and wind, in ...
-
Manufactured by Royal IHC Holland B.V.based in NETHERLANDS
We design and construct heavy-lift jack-up vessels for the offshore wind, and oil and gas markets. These self-elevating platforms can be delivered as a package or turnkey, according to customer ...
-
Manufactured by NRG Systemsbased in USA
An advanced, 26-channel data logging system, SymphoniePRO is purpose-built for the renewable energy professional. As the newest data logger in the Symphonie series, SymphoniePRO brings significant upgrades in terms of capability and flexibility while building on the unparalleled foundation that is the Symphonie product line—a series of application-specific and user-friendly data ...
-
by Crestwingbased in DENMARK
Crestwing is working with leading scientists and PhD students at Aarhus University, Danish Technical University, Stanford, Harvard and Aalborg University on optimizing the system and the first Wave Energy Converter (WEC) pilot park. The pilot park is planned to begin commissioning in 2025. The supply chain is already in place, with, among others, ABB and Seaflex working closely with Crestwing. ...
-
based in USA
Designed for IEC Wind Class IIIs, GE’s 2.75-120 wind turbine features a 120-meter rotor in combination with the proven single-blade pitch control. The 2.75-120 offers the latest enhancements in load management controls, low acoustic emissions, efficient electrical power conversion and robust ...
-
Manufactured by Leitwind SPAbased in ITALY
The LTW90 wind turbine was specially designed for low-wind sites. Thanks to the large rotor surface area, it ensures significant power generation and is perfectly suitable for a wind class of up to ...
-
based in USA
GE’s 1.85-87 wind turbine is designed for Class IIs winds, and offers an 11% increase in swept area and an extra 230 kW output at rated wind speed compared to the 1.6-82.5 turbine. The increase in blade swept area results in a 10% increase in Annual Energy Production (AEP) at 8.5 ...
-
Manufactured by AXYS Technologies Inc. (AXYS)based in CANADA
AXYS FLiDAR (Floating LiDAR) WindSentinel systems accurately measure wind speed and wind direction offshore at turbine hub-height and across the blade span for cost-effective wind resource ...
-
based in ITALY
Wind power has been experiencing an extraordinary development in the last few years. And it is expected to grow at a rate of 30% per year in the near future. In Italy it has been the source that has reported the highest growth in the last decade. ...
-
Manufactured by SMD UKbased in UNITED KINGDOM
ARTEMIS LIVE: A PASSIVE TRACKING AND SURVEY TOOL USED ON LIVE AC OR UNIPOLAR DC CABLES THAT ARE POWERED. The Artemis sensors are set to look for 50/60 Hz or a harmonic from the live power transmission (residual in AC phase imbalance, or from AC-DC conversion). Unlike alternative technologies on the market, Artemis uses a model-based technique looking at the 3D magnetic field properties to ...
-
Manufactured by W2E Wind to Energy GmbHbased in GERMANY
The light weight wind turbine technology provides turbines for various locations. The W2E-93/2.0 turbine is most suitable for standard wind conditions and the W2E-100/2.0 for low wind speed sites. Both stands for most efficient wind power plants in its ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you