Wind Farm Equipment For Wind Energy
-
Manufactured by W2E Wind to Energy GmbHbased in GERMANY
The light weight wind turbine technology provides turbines for various locations. The W2E-93/2.0 turbine is most suitable for standard wind conditions and the W2E-100/2.0 for low wind speed sites. Both stands for most efficient wind power plants in its ...
-
based in ITALY
Wind power has been experiencing an extraordinary development in the last few years. And it is expected to grow at a rate of 30% per year in the near future. In Italy it has been the source that has reported the highest growth in the last decade. ...
-
Manufactured by Leviathan Energy LLC.based in USA
Leviathan’s new technology for aerodynamically enhancing wind flow to turbines enabled the development of the Wind Energizer™. This passive device increases both average power and revenues by around 20 to 40% of all large wind ...
-
Manufactured by Nordex SEbased in GERMANY
With the N149/4.0–4.5, the Nordex Group was the first company to launch a turbine platform with a flexible rating as part of its core design philosophy and operation strategy. This design approach, combined with a variety of operating modes, enables the Delta4000 turbine to adapt to the grid operator’s individual requirements, local wind conditions and noise ...
-
by Crestwingbased in DENMARK
Crestwing is working with leading scientists and PhD students at Aarhus University, Danish Technical University, Stanford, Harvard and Aalborg University on optimizing the system and the first Wave Energy Converter (WEC) pilot park. The pilot park is planned to begin commissioning in 2025. The supply chain is already in place, with, among others, ABB and Seaflex working closely with Crestwing. ...
-
based in DENMARK
Bringing new life to aging wind turbines. Wind turbine repowering is all about getting the maximum value from the initial investment. Replacing aging, generally smaller wind turbines and turbine parts with new and more efficient units leads to higher capacity and more efficient turbines, significantly increasing the amount of energy generated from a given wind farm. Power production increases as ...
-
based in USA
Because coal plants are already connected to the power grid, by replacing coal with clean-burning, carbon neutral biocoal, their useful lives are extended. Other green energy technologies such as wind, solar, and traditional biomass (white pellet) power come with their own economic and environmental ...
-
Manufactured by ZX Lidarsbased in UNITED KINGDOM
Full IEC Classification, the longest service and warranty period as standard of any Lidar and accepted by DNV GL as a Stage 3 Bankable ...
-
Manufactured by Zhejiang Windey Co., Ltd.based in CHINA
3.XMW series wind turbines are constructed of mature and reliable upwind direction, horizontal axis, three-point support structure and adopt the variable-speed constant-frequency double-fed power generation technology. They are an affordable product developed in view of the characteristics of wind resources and environment in inland areas exposed to a medium or high wind speed. They are aimed to ...
-
Manufactured by Drax Groupbased in UNITED KINGDOM
Key facts: Drax Power Station provides 12% of the UK’s renewable power, providing a secure, reliable and flexible source of renewable energy to support more intermittent renewables, such as wind and solar. The site near Selby in North Yorkshire provides the most renewable power of any single location in the UK, some 14 terawatt-hours (TWh) or enough electricity to power the equivalent of ...
-
Manufactured by IOXUS, By Systematic Power Manufacturing, LLCbased in USA
IOXUS, the only fully integrated ultracapacitor design and manufacturing facility in North America, maintains the highest standards and delivers the most flexible problem-solving methods for storing and delivering power. Our Titan ultracapacitors were designs specifically to handle harsh mechanical, electrical, and environmental conditions found in transportation markets. We use a propriety ...
-
based in GERMANY
KGW offers pre-assembled kits of internals, each tower and section of which is completely prepared for transportation by road or sea. On demand, KGW takes over the entire logistics of progress supervision and transport to the wind farm. Up to now, KGW kits have been supplied for projects in Germany, Turkey, Poland, Uruguay and ...
-
Manufactured by Baltic WindWerke GmbH & Co. KGbased in GERMANY
The 2.0 megawatt wind turbine is designed for high yields, but can also be adapted to low-wind sites (IEC 3). Large rotors with a diameter of 93 and 100 m ensure high yields. As a cold-climate version (CCV) and hot-climate version (HCV), the FW 2000 is also suitable for sites with extreme climatic conditions. ...
-
Manufactured by American Hydrotech, Inc.based in USA
Hydroguard provides both insulation and lightweight ballasting for PMR assemblies. Composed of 2 ft. x 4 ft. Styrofoam™ panels topped with latex modified concrete and tongue and groove edges along the long sides allow each board to be interlocked during installation, creating a continuous layer of thermal protection. Hydroguard acts as a durable barrier, protecting the roofing membrane from ...
-
based in SWITZERLAND
nabla wind hub has introduced the concept of reblading wind turbine which represents not just the possibility to purchase unavailable spare components, often out of production when it comes to old turbine models, but the opportunity to increase the electrical output of the assets, reduce the OPEX, adopt a true Life Extension enabler. ...
-
Manufactured by ADES-Tempero Groupbased in SPAIN
The unique design of the ADES wind turbine includes three passive mechanical systems: a swivelling single-blade rotor, a pendulum power train and a selfsteering nacelle. The design compensates, accumulates and reinstates wind speed variations, preventing them from affecting the evenness of generator rotation and subsequently diminishing structural overload and power peaks caused by wind gusts. ...
-
by ONYX InSightbased in UNITED KINGDOM
Access the insights you need to enhance the performance and reliability of your wind farms. Get a 360º view of your wind turbines: Reliability & Lost Energy Intel combines cutting-edge machine learning techniques with our rich engineering heritage delivering a comprehensive health assessment using your existing SCADA data focused on detecting issues causing inefficiency and downtime all ...
-
based in FRANCE
Wind Fisher’s Energy Balloons generate lift using the Magnus effect, named after Gustav Magnus, a professor of physics at the University of Berlin in the mid 1800s. The rotation of the cylinders in wind influences the airflow creating differential pressure, and thus lift on the cylindrical wing. Wind Fisher harnesses this lift force to generate high traction forces on the tether during the ...
-
Manufactured by BQ Energybased in USA
BQ Energy built our reputation by developing wind energy facilities on brownfield sites. We are well known for having pioneered this market by bringing the 36 MW Steel Winds facility in Lackawanna NY to a commercial ...
-
Manufactured by Free Breeze Energy Systems Ltdbased in CANADA
Free Breeze offers re-manufactured V80's with the same warranty as new. It has always been a premier performer in its class, and has made it the turbine of choice for a wide variety of applications, including wind farms and community power projects. Not surprisingly, an acclaimed pedigree has laid the foundation for the turbine's consistent performance and efficient ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you