Wind Farm Equipment For Wind Energy
-
based in USA
The WindFloat® is a semi-submersible, three-column floating platform compatible with any standard offshore wind turbines and suitable for deployment in waters deeper than 40 m. ...
-
based in SPAIN
ACCIONA Energy is a world leader in the development, construction, operation and maintenance of wind farms, with more than 20 years’ experience in the ...
-
Manufactured by eTa Bladesbased in ITALY
eTa Blades has introduced into the market the Re-blading concept with the aim to provide a solution for Performance Improvement and Life Extension. eTa Blades is among the Top companies of “Green Made in Italy” – a Sustainable Development Award promoted by the Foundation for Sustainable Development and by Ecomondo. The award has been granted because of the achievements in ...
-
Manufactured by Suzlon Energy Limitedbased in INDIA
With the introduction of new 3 MW Series, Suzlon has yet again redefined the benchmark with S144, one of the largest wind turbine that will target India's relevant low wind regimes. 144m rotor diameter with a swept area of more than 16,618 sq. meters. 6 pole generator, proven DFIG technology, Water - Air cooling. Work platforms, covered entry from tower top, safety guards on all ...
-
by Wave Dragonbased in DENMARK
Wave Dragon is a floating, slack-moored energy converter of the overtopping type that can be deployed in a single unit or in arrays of Wave Dragon units in groups resulting in a power plant with a capacity comparable to traditional fossil based power ...
-
based in ICELAND
With the increasing demand for clean energy Wind Energy has become the worlds fastest growing electricity generation technology. Vista Data Vision is a powerful software for studying the expected outcome from a Wind Site as well as comparing Wind Turbine"s real performance to the design ...
-
based in SWEDEN
SENS offers solutions for large-scale battery storage, both behind the meter together with renewable energy production but also as independent resources to be used for frequency control and grid stability. We can also help if you are considering installing batteries yourself, either as a project developer or with selective, expert ...
-
Manufactured by Free Breeze Energy Systems Ltdbased in CANADA
Free Breeze offers re-manufactured V47's with the same warranty as new. It has always been a premier performer in its class, and has made it the turbine of choice for a wide variety of applications, including wind farms and community power projects. Not surprisingly, an acclaimed pedigree has laid the foundation for the turbine's consistent performance and efficient operation. ...
-
Manufactured by Vertogen Ltdbased in UNITED KINGDOM
Rotate on a horizontal axis generator mounted at the top. What most of us perceive as normal wind turbine that are now all around us now on wind ...
-
by TEXSYSbased in FRANCE
EnR-DEIE is an automaton developed for managing on the production side the DEIE facility required by ENEDIS for: transmitting the functioning status of the power station and executing ENEDIS telecommands, related to the connection to the grid, the operating regime and power limitation. The EnR-DEIE automaton is installed in the substation and interfaced to the ENEDIS DEIE device. It makes the ...
-
Manufactured by Hailo Wind Systems Gmbh & Co. Kgbased in GERMANY
Our TOPlift+ – ladder-guided service lifts, prized across the globe and in accordance with the most-modern safety standards. The TOPlift+ is ideally suited for retrofitting into pre-existing wind farms as well as for offshore uses and lattice ...
-
based in RUSSIA
The main problems of modern wind turbines (those with horizontal axis types) that inhibit the development of wind power engineering and which are solved by a new type of wind power plant: Source: ...
-
Manufactured by eTa Bladesbased in ITALY
Generally, the design conditions of old wind turbines are very conservative compared to the reality of the sites where they are located, so they have a huge potential to be unlocked, in terms of life extension, performance improvement and maintenance optimization. In this sense, the retipping solution proposed by eTa Blades in Nabla Wind Hub group aims to increase the rotor diameter of wind ...
-
Manufactured by Sifbased in NETHERLANDS
Our operational division Offshore Steel Structures (OSS) covers a wide range of products including Pin Piles and Jacket Tubulars, supplying offshore foundations components to the booming offshore wind farms market (both for turbines and substations), whilst ensuring energy security by supply to the oil and gas sector. The variety in needs and specifications is substantial, and our experience and ...
-
based in SPAIN
Nabrawind Self Erecting Tower (Nabralift) is a new wind turbine tower technology that breaks all the barriers that are restraining the growth of the wind turbines hub height. Nabralift consists on a three-columns structure installed under the uppermost part of a WTG tubular tower and integrates a Self-Erection System (SES) that allows the installation of a full WTG (tower, nacelle, rotor) ...
-
Manufactured by Free Breeze Energy Systems Ltdbased in CANADA
The V27 - 225kW is a 225 kilowatt Wind Turbine Generator equipped with components from reputable firms such as Siemens Ltd. and Hansen who supply the Generator and Gear Box respectively. The 13 meter Blades are manufactured in a state of the art climate controlled facility that was built in 2006. The V27 - 225kW is also equipped with pitch regulation controlled by a microprocessor (VMP) and is ...
-
based in UNITED KINGDOM
The commissioning of a wind turbine is a key service within a defined 4-stage process, during the construction/installation of a wind turbine. Once constructed, the commissioning begins on a wind turbine, and is the core element in ensuring your wind turbine is able to function correctly, and provide its most efficient AEP (Annual Energy Production). ...
-
Manufactured by Norddeutsche Seekabelwerke GmbH (NSW)based in GERMANY
NSW, with its many years of experience in submarine and offshore cables, offers the necessary expertise to satisfy the challenging requirements of cabling wind farms. In addition, our manufacturing, which we do only in Nordenham, provides another benefit: short delivery times for the entire North Sea area from our own pier on the Weser. We stand ready to implement needed new developments with our ...
-
Manufactured by Elecnorbased in SPAIN
Feasibility studies. Cost-finance analysis. Project administration procedures. Permitting and planning management. Construction and detailed engineering project design. Turnkey construction. Operation and maintenance. Operations ...
-
Manufactured by Elecnorbased in SPAIN
In wind energy, Elecnor has not only built numerous turnkey wind farms throughout Spain for various developers, but also acts as a developer and operator through its subsidiary ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you