Wind Power Inverters Equipment For Wind Energy Available In Michigan
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
The feed-in converter smart!wind was designed by SPE especially for small wind turbines (SWT) with a power range from 5.5 to 20 kW. Besides the control functions for a SWT the smart!wind provides several protective functions supporting a safe operation of your SWT. Small hydro plants as well as CHP’s offer additional possible applications. Our feed-in converter is available in the following ...
-
Manufactured by Shandong BOS Energy Technology Co., Ltdbased in CHINA
Wind off-grid power system consists of the wind turbine, controller, battery, wind off grid inverter and distribution system.Wind generate AC power through the wind turbine generator driven by the wind, and then converted to be DC power. The wind turbine off grid inverter will inverte the DC power to be the right voltage , frequency and pure sine wave AC power to the local load. When the wind ...
-
Manufactured by Gaotune Technologies Co.,Ltd.based in CHINA
Application: High-power (especial more than 50KW) reactors of solar or wind ...
-
Manufactured by KLiUX Energies International Inc. (KLiUX)based in USA
Why wind and solar hybrid system? With Kliux’s wind and solar photovoltaic hybrid system, combining a vertical axis wind turbine from Kliux Energies and solar photovoltaic panels, you will be able to make the most of the resources offered by the sun and wind available 24 hours a day and thus optimize the power generation hours, while making it possible to supply 100% of the electricity ...
-
Manufactured by Jinan Xinyuhua Energy Technology Co., Ltd.based in CHINA
The main circuit adopts the DSP chip from the United States TI company, the Infineon. IGBT modules, the Infineon protection driver,the part of on grid output adopts isolation transformer,safe and reliable. Using SPWM pulse width modulation technology, with pure sine wave output, power factor close to 1.Current harmonic content is low. DC Maximum Power Point Tracking(MPPT). Inverter and network ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
Working grid feed in at 2.5 m/sec. wind speed after start up, depending on the repeller. Purpose built for inland areas with low untill moderate wind speed. From an average wind speed with 7.0 m/sec. we use a repeller with 5.8 m ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
Permanent-magnet rotor, brushless, gearless, maintenance-free. Extremely strong permanent magnets for a high level of efficiency. (NdFeBo permanent magnets, resistent to temperatures up to 150° C). Special ball bearings for reliably taking up radial and axial forces. 3-phase current. Separate rectifier. Either direction of rotation. Voltage 0-1000 VDC. Start of feed-in at approx. 100 rpm. ...
-
Manufactured by Celec Enterprisesbased in INDIA
Celec is one of the leading manufacturers and exporters of electric saver which aim to improve power quality issues including power factor and electrical ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
Working grid feed in at 2.5 m/sec wind speed after start up, depending on the repeller. Purpose built for inland areas with low untill moderate wind speed. From an average wind speed with 7.5 m/sec. we use a repeller with 4.0 m ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
Permanent-magnet rotor, brushless, gearless, maintenance-free. Extremely strong permanent magnets for a high level of efficiency. (NdFeBo permanent magnets, resistent to temperatures up to 150° C). Special ball bearings for reliably taking up radial and axial forces. 3-phase current. Separate rectifier. Either direction of rotation. Voltage 0-1000 VDC. Start of feed-in at approx. 100 rpm. ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
NdFeBo permanent magnets – these are the strongest permanent magnets currently available. No cogging torque, maintenance-free!. To ensure long, maintenance-free service of the generators in the ANTARIS wind turbine, the copper winding in the stator is configured to meet insulation class H (180° C). As the repeller is attached directly on the generator shaft, BRAUN Windturbines GmbH ...
-
Manufactured by Surge Suppression, LLC (SSI)based in USA
With the exclusive SG product line, SSI has products designed specifically to protect the sensitive AC to DC power inverters. SSI recommends a systems or layered approach when protecting incoming power and energy generation systems. Providing protection at the utility supplied service equipment is the first crucial step to protecting a home or facility from externally generated surge events such ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
The PVI-3.0/3.6/4.2-TL-W wind turbine inverter is designed with ABB’s proven high performance technology. This dual stage transformerless wind inverter offers a unique combination of high efficiency, installer-friendly design and very wide input voltage range ensuring high energy harvesting. The high speed and precise power curve tracking algorithm allows to best match the power curve of ...
-
Manufactured by Aeolos Wind Energy Ltdbased in UNITED KINGDOM
Aeolos-H 1kw wind turbine is a simple, easy installation and reliable wind generator with tail. The first installation was made in 1986 in Denmark as the off grid application for home power supply. The output can be DC 48v for battery charging or DC 110v for grid tie application with SMA Wind Boy 1100 inverter. As a residential wind turbine, it was mainly used for home, boats and small farm power ...
-
Manufactured by Kesheng Electronic Co., Ltd.based in CHINA
Equivalent series resistance is small and can withstand large ripple current. Small inductance, low temperature rise, long life. Dry structure, solid epoxy filling. Metal aluminum case (with mounting screw), easy to install. Used in DC filter circuit, which can replace electrolytic ...
-
Manufactured by Celec Enterprisesbased in INDIA
Celec is one of the leading manufacturers and exporters of electricity saver device which aim to improve power quality issues including power factor and electrical ...
-
Manufactured by E- Novasolarbased in ITALY
The great versatility of the new serie universal controller GRID-TIE will allow you great flexibility in use and at the same time an extreme easy-connection: three jack connectors go directly linked to the three phases of your wind turbine and two supplementary connectors are designed for protection against discharge voltage and the inversion current. The GRID-TIE is lightweight and easy to ...
-
Manufactured by Semikron Danfossbased in GERMANY
The New High-Power Standard in Traction, Renewables and Drives SEMITRANS 20 represents the next generation standard power module for high-power applications. The SEMITRANS 20 product family features two different Versions: SEMITRANS 20 TRACTION: rolling stock reliability and SEMITRANS 20 INDUSTRIAL: optimised for wind, solar and drive applications. The SEMITRANS 20 is ideal for paralleling, ...
-
Manufactured by Celec Enterprisesbased in INDIA
Celec is one of the leading manufacturers and exporters of electric saver which aims to improve power quality issues including power factor and electrical ...
-
Manufactured by Hadda International Group (HIG)based in BELGIUM
Sustainable wind energy is capturing ongoing attention and is in development worldwide. Knowledge about this renewable energy source is now more important than ever. In addition, climate change makes it imperative for us to take sustainable measures. The use of this renewable energy source is still limited today, but it will significantly increase in the coming ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you