Wind Power Modeling Equipment For Wind Energy
-
Manufactured by Genmounts Solar Racking Systemsbased in USA
Non-penetrating ballasted pv racking system for commercial and utility scale flat rooftop solar power ...
-
Manufactured by KB Rackingbased in USA
EkonoRack 2.0 is the simplest non-penetrating solar mounting solution for commercial flat rooftops. The system’s ETL Certification attests to its high standard of safety and robust design, allowing it to be grounded with only one grounding lug per array. EkonoRack 2.0’s innovative design is composed of only one major component, acting as a ballast tray windshield mount and multiple ...
-
Manufactured by AP-Alternatives (APA)based in USA
Designed by installers for installers, TITAN™ is the most advanced hardware in the industry. TITAN'S innovative features allow for flexibility in the field while streamlining the install process. With the lowest part count per MW and integrated grounding and cable trays, TITAN is installers preferred choice. The 4-rail design is an excellent solution for areas with high snow loads and large ...
-
Manufactured by Aerocompact GmbHbased in AUSTRIA
AEROCOMPACT G+ is the new east/west oriented ground mount system with up to 30% more modules on the same ground space. Designed with a 10° module tilt and elevated 40 cm off the ground from the lowest module point. As the south facing system the east/west can be installed with ground screws or ballast ...
-
Manufactured by Carter Wind Energybased in USA
The wind turbine technology Carter has developed is most significant in that produces 4 times the energy per pound of equipment weight versus conventional wind turbine designs. The capital investment required to manufacture, transport, install, and maintain wind turbines, is a function of equipment weight. More energy with less equipment weight means a lower cost of ...
-
Manufactured by SunEdisonbased in USA
The AP90 is SunEdison’s newest Single-Axis Tracker with more than 600MW under construction or in the planning stages. Built off the legacy of the A90 Tracker, the AP90 is designed for worldwide manufacturability and fast installation, making it the most cost-effective Tracker in the world. It features 1 module in portrait mode, with up to 42 modules per row, and a total of 30 rows per ...
-
based in USA
Building on the exceptional performance of the 2.5 MW fleet, GE’s new 3.2-103 brilliant wind turbine generates an impressive 5% increase in energy output while providing the same reliable performance of the 2.85-103. As a brilliant turbine, the 3.2-103 utilizes the power of the Industrial Internet to help manage the variability of wind, providing smooth, predictable power. By analyzing tens ...
-
Manufactured by Anakata Wind Power Resources Ltdbased in USA
The rotor is the first phase of the energy transformation process from kinetic wind energy into mechanical torque, and as such is where investment in technology should be maximised. Aerodynamics is overlooked by many wind turbine designers because they do not understand what is possible; as such they continue to use out-dated technology and design ...
-
Manufactured by W4P Waves4Power ABbased in SWEDEN
The creation of a new industry does not happen very often. But this is really what Waves4Power is all about. We are building a new European energy industry that is totally fossil free and renewable. Waves4Power is a leading player in the green marine energy industry which is expected to be the future in energy production for Europe as well as the rest of the ...
-
Manufactured by Ecolibrium Solar - Uniracbased in USA
5º Density. Built on the Speed & Simplicity of the Industry-Preferred EcoFoot ...
-
Manufactured by Haosolar Co. Ltd.based in CHINA
Product Model: HY-AR-I35. Surface Area: Up to 56m². Tracking accuracy: ±2.0°. Module Arrangement: Portrait and Landscape. Installed solar panel type: 250Wp--330Wp. Number of modules per string: Up to 28 modules. Adjusting angle range: 0°- 60°. Maximum working wind speed: 25 m/s. The maximum wind speed: 42 m/s. The power output increasing: Up to 10%. ...
-
Manufactured by Soltecture Solartechnik GmbHbased in GERMANY
Soltecture transforms plain flat roofs into solar energy power plants, whether they are covered with roofing membranes*, bituminous sheeting or gravel. Where other system solutions are too heavy, Soltecture’s Tectum flat roof system provides the only solution. It is minimally exposed to the wind and is so lightly constructed that it can also be installed on lightweight roofs with low ...
-
Manufactured by KB Rackingbased in USA
AeroRack 2.0 is the next generation of rail-based mounting solutions. KB Racking has refined its rail based solution to provide customers with the same core elements of integrated wire management and simple installation, at a more economical price. The system features the same low ballast requirements and structural integrity as the original AeroRack, with a more aerodynamic design. AeroRack 2.0 ...
-
Manufactured by Solar Mounting Solutionsbased in USA
Solar Mounting Solutions’ series of universal solar roof mounting products is one of the first to be certified under the UL 2703 listing for photovoltaic panel mounts. Our product has undergone rigorous testing to evaluate its efficiency and reliability, including 120 mph wind conditions, extreme temperature and humidity cycles, salt water spray, electrical grounding and bonding, and ...
-
Manufactured by Ge:Net GmbHbased in GERMANY
The exact measurement of the local energy resource is state of the art in wind power to asses the potential energy yield – and it gets more and more common for solar power, too. Especially for large scale solar power plants an accurate measurement of the actual radiation conditions on site is highly recommended to reduce the financial risk of the large investment needed to build ...
-
Manufactured by Van der Valk Solar Systems BVbased in NETHERLANDS
The ValkPro+ L10 South or East-West and the ValkPro+ P10 South or East-West have different foundation methods. For example, the systems can be mounted using rubber tile carriers, mass blocks, or consoles. Rubber tile carriers are easy to transport and install due to their low weight and soft structure and they also protect the roof surface. The advantage of mass blocks is that they can ...
-
Manufactured by Inventive Gas Equipmentbased in INDIA
Burj Khalifa has redefined what is possible in the design and engineering of supertall buildings. By combining cutting-edge technologies and cultural influences, the building serves as a global icon that is both a model for future urban centers and speaks to the global movement towards compact, livable urban ...
-
Manufactured by HeliosLitebased in FRANCE
HeliosBox will improve your profitability by saving you time and money throughout the project cycle. With our innovative system, project-specific layout and ballast calculations have never been easier. Our online configurator allows you to customize your solar installation to meet your exact requirements. Simply input your project details, and our configurator will generate the optimal layout and ...
-
based in USA
GE’s battery software applications are part of its Brilliant Turbine platform. The battery technology enables short-term energy storage as part of the complete turbine system. Integrating the battery into the wind turbine allows wind farm operators to benefit from wind energy storage without the high costs of farm-level battery storage installation. This revolutionary wind turbine battery ...
-
Manufactured by Opsun System Inc.based in CANADA
Our designers and engineers can create an inverter rack for your project, for any commercial string inverter types. Typical designs can be flush (0 deg. tilt), or tilted at 5 to 90 deg. Any common roof type. Any wind loads, any building height, ballasted or anchored. We will create a rack that matches your needs. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you