Only show results available in Virginia? Ok

Wind Power Safety equipment for Wind Energy

  • Renesun - Model Biaxial RS 40-2 - Solar Tracking System

    The RS40-2 Solar Tracking system is a dual axis tracking system for photovoltaic modules. Produces 35-40% more KWh output compared to a fixed installation system. The use of the innovative RmS Profiles, provides absolute freedom to the final selection of solar panels to be installed making also the installation of solar panels an easy process. No ...

    By Renesun based in Volos, GREECE. from Trackers Product line

  • SunEdison - Model AP90 - Single-Axis Tracker

    The AP90 is SunEdison’s newest Single-Axis Tracker with more than 600MW under construction or in the planning stages. Built off the legacy of the A90 Tracker, the AP90 is designed for worldwide manufacturability and fast installation, making it the most cost-effective Tracker in the world. It features 1 module in portrait mode, with up to 42 ...

    By SunEdison based in Belmont, CALIFORNIA (USA).

  • Power Partners - Model JUMBO - Distribution Transformers

    Power Partners, Inc. “JUMBO” Distribution Transformers are designed as single phase, two-winding transformers—specifically for “Step-Down” applications.

    By Power Partners, Inc. based in Athens, GEORGIA (US) (USA).

  • LJM - Model NH30 - Hydraulic Cylinder for Industrial Use

    High quality hydraulic cylinders are your guarantee reliability and an optimized durability. Hydraulic cylinders from LJM are designed for a high safety factor and the high level of quality provides stability and durability in your production. With our consultancy and expertise we ensure you comfort in your product development. The standard series ...

    By LJM Lind Jensens Maskinfabrik based in Højmark, DENMARK. from Hydraulic Cylinders Product line

  • Renesun - Model Biaxial RS 85-2 - Solar Tracking System

    The RS85-2 Solar Tracking system is a dual axis tracking system for photovoltaic modules. Produces 35-40% more KWh output compared to a fixed installation system. The use of the innovative RmS Profiles, provides absolute freedom to the final selection of solar panels to be installed making also the installation of solar panels an easy process. No ...

    By Renesun based in Volos, GREECE. from Trackers Product line

  • Model LDH/LDK Series - Offshore Torque Wrench

    Salt water and sea air resistant. The LÖSOMAT Offshore Torque Wrench is the best choice for the construction of offshore wind energy plants. The special surface makes the tool resistant to salt water and sea air. An integrated overpressure valve int the hydraulic connection increases the work safety levels. The hydraulic connection is ...

    By GEDORE Torque Solutions GmbH based in Vaihingen/Enz, GERMANY.

  • Metronome - Model 12 KW - Wind Turbine

    Rated power : 12 kw. Maximum power : 18 kw. Rotor diameter : 9 m. Mast height : 11 and 18 m hydraulic tip-up mast. Gross weight apart from mast : 461 kg. Yaw control : active worm gear motor control through frequency inverter for soft start and stop. Integrated safety braking and emergency stop. Wind class ii according to en61400-2 standard.

    By Eolys based in St Hilaire De Voust, FRANCE.

  • W2E - Model 100/2.0 - Wind Turbine System

    Rated power: 2.05 MW. Rotor: 100 m. Wind class: IEC 3a. Cut-in wind speed: 3.5 m/s. Rated wind speed: 11.5 m/s. Cut-out wind speed: 25.0 m/s. Capacity factor*: 3,975 h, 45%. Sound power: 105,8 dB(A). Hub height tubular tower: 85 m | 100 m. Hub height lattice tower: 117 m | 141 m. Drive train concept - LARUS Compact: Main gearbox in combination ...

    By W2E Wind to Energy GmbH based in Rostock, GERMANY.

  • W2E - Model 116/2.0 - Wind Turbine System

    Rated power: 2.0 MW. Rotor: 116 m. Wind class: IEC 3a. Cut-in wind speed: 3 m/s. Rated wind speed: 11 m/s. Cut-out wind speed: 25 m/s. Sound power: 105 dB(A). Hub height tubular tower: 100 m. Drive train concept - LARUS Compact: Main gearbox in combination with torque bearing as a. Plug & Play-system. Electrical configuration: Double fed ...

    By W2E Wind to Energy GmbH based in Rostock, GERMANY.

  • Viking Wind - Model 25 kW - Real Wind Turbine

    Viking 25 is a ”real” wind turbine and has the same beautiful appearance as the big MW wind turbines. A Viking 25 kWh wind turbine becomes a harmonious part of the landscape. The wind turbine is constructed according to the same well tested big wind turbines.

    By Viking Wind ApS based in Randers SØ, DENMARK.

  • SUNOLUTION - Subconstruction System

    GOLDBECK SUNOLUTION is, as a low-ballast subconstruction for photovoltaic systems, the optimum solution for use on large flat-roofed areas. Utilizing aerodynamic effects, the loads on the building are reduced and yet still guarantee secure positioning and full functionality (e.g. free water flow and and lightning current-carrying capacity). The ...

    By GOLDBECK Solar GmbH based in Hirschberg, GERMANY.

  • Avanti - Wind Turbine Ladder

    Avanti has produced ladders since 1885, and for more than 2 decades Avanti Wind Systems has produced ladders in aluminum for the Wind Turbine Industry. With great success – Avanti’s ladders can be found in turbine towers all over the world. The Avanti Ladder is a safe and rigid structure. The design is optimized ensuring strength in ...

    By Avanti Wind Systems Limited based in Hillerød, DENMARK.

  • Evapco-BLCT - Air Cooled Condensers

    For steam cycles of 1 to 1000MW, EVAPCO-BLCT Dry Cooling can supply the Air Cooled Condenser that is right for your application. Irrespective of fuel source, biomass, fossil, or solar, an EVAPCO-BLCT Dry Cooling ACC can significantly reduce the water requirements of any power plant utilizing a steam cycle.

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Power Generation Product line

  • Air Force - Model 10 - Wind Turbine

    SIL Level 3 independent safety control monitoring.Intelligent wind tracking adapts to wind conditions.Multiple rotor speed limiting systems.Ground level control panel housing electronics, inverter & hydraulics.Remote monitoring and data logging.Hydraulically raised tower.All UK designed & manufactured.GenDrive inverter (UK design & ...

    By FuturEnergy Ltd based in Stratford upon Avon, UNITED KINGDOM.

  • Inteo Clamp - Laminate Modules

    Laminate modules behave like glass panels inserted in buildings. Only when the correct technology is utilised for their installation that their safety and long-term durability is guaranteed. Soltecture has developed a safety clamp that makes the deployment of laminate modules more secure and reliable than conventional clamps: Soltecture relies on ...

    By Soltecture GmbH based in Berlin, GERMANY. from Solar Modules and Components Product line

  • Turbowinds - Model T500-48 - Wind Turbine

    Turbine type: T500-48 Dual speed. Rated Power: 500 kW. Wind class: II A (8.5m/s maximum).  Rotor diameter: 48 m.  Hub height: 50/60 m

    By TURBOWINDS SA/NV based in BRUXELLES, BELGIUM.

  • Sundermann - Submerged Water Turbine

    The Sundermann Turbine is a submerged water turbine which drives a generator. It is specifically designed to maximise operational efficiency in slow to medium speed water flows of 6-12 knots. The Sundermann Turbine is suitable for installations where water flow is either in a single direction, such as rivers or ocean currents, or in tidal areas ...

    By Sundermann Water Power Ltd based in Heyfield, AUSTRALIA.

  • Photovoltaic Panels

    The most important issues while installing photovoltaic panels. The choice of location; Choose the right place for a location of modules. For the best possible energy production modules should be directed to the south (for the northern latitudes) and to the north (for the southern latitudes). Detailed information on how to install, about angles of ...

    By Hymon Energy based in Tarnów, POLAND.

  • Northern Power Systems - Model NPS 60-23 - Wind Turbine

    Built on Proven NPS 100 Platform – Millions of Runtime Hours. Low Cost of Ownership. Tower Options: 23, 30 and 37m Hub Heights. Quieter – Lower RPM, Lower Tip Speed. Handles High Winds. Redundant Safety Features. Rotors Built to Last.

    By VG Energy based in Galston, UNITED KINGDOM.

  • Natural Disaster Mitigation Film

    During storms, when high-powered winds are allowed to enter a structure, they can collapse it from the inside. By preventing the glass from shattering, Madico’s SafetyShield film not only prevents potential physical harm, but also keeps winds from rushing inside and doing serious structural damage. And during an earthquake, SafetyShield ...

    By Madico, Inc. based in Woburn, MASSACHUSETTS (USA). from Window Films - Safety & Security Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you