Wind Turbine Blades Equipment For Wind Energy In Europe
-
Manufactured by DEIF A/Sbased in DENMARK
Wind turbine pitch servo drive with integrated safety, distributed I/O and cold climate specifications for robust pitch systems. The IMD-100 is a robust motor drive with integrated safety and distributed I/O to be used as pitch servo drive for wind turbines from kW to MW range. The servo drive has cold climate specifications making it suitable for any wind turbine blade pitch system design. The ...
-
Manufactured by Seawind Ocean Technology Holding B.V.based in NETHERLANDS
Market-leading electricity and hydrogen technologies with higher performance, cost-efficiency, and sustainability. The Gamma 60 onshore two-bladed wind turbine (1.5 MW) has demonstrated the viability of Seawind’s patented technology (certified by DNV in December 2019). The next steps in the continuous validation of our technology is the construction of a Seawind 6.2 MW floating turbine to ...
-
Manufactured by Wind Energy Solutions BV (WES)based in NETHERLANDS
The WES50, with a rotor diameter of 20 meters, is specifically designed for areas with lower wind speed (class III). This two bladed wind turbine, with an new cover, is a reliable 50kW midsize wind turbine with a high performance. The mechanical part of the WES50 is based on the original, proven design from 1983. For the electrical parts providing power conversion and control, the latest ...
-
Manufactured by Twenco B.V.based in NETHERLANDS
Twenco weight terminal for static balancing of a wind turbine blade. Balancing in a set of 2 or 3 blades or equal to a group of blades. Available for any type of blades, from small up to MW class. Measured and calculated data can be stored in an archive on the local PC or transferred to a central server. Different blade types (diameter/length/contour) can be balanced on the same weight ...
-
based in UNITED KINGDOM
Utilising a variety of access techniques for inspection, GEV are able to provide a fast and effective service to complete the detailed analysis of all aspects of damage to the ...
-
Manufactured by FuturEnergy Ltdbased in UNITED KINGDOM
These wind turbine blade sets are constructed to the highest of standards, and are used at the heart of our 1KW upwind range. They can easily be adapted to suit other turbines, and will produce up to 1.2kW of power in 12.5m/s winds. The blade set comes in kit form, including 3 x high-spec blades, manufactured in black PAG material (virtually indestructible, and don’t require painting), with ...
-
Manufactured by Haydalebased in UNITED KINGDOM
Haydale’s electrically enhanced prepreg has been specifically designed to enhance the electrical conductivity of the laminate. This prepreg material delivers a new generation of carbon fibre-reinforced composites having improved electrical conductivity. These materials can be used for structural components as well as for enclosures for the electronic avionics systems. The materials ...
-
based in UNITED KINGDOM
As expert wind turbine blade maintenance specialists, GEV Wind Power have a wealth of knowledge and experience when it comes to improving turbine productivity through the installation of retrofits and upgrades. ...
-
based in SPAIN
Nabrawind Modular Blade System (Nabrajoint) is a technology applicable to any wind turbine blade (existing or new) that allows manufacturing blades in two or more parts that are transported separately and assembled on site. Nabrajoint technology is based on a bolted connection between blade modules with conventional, controlled and robust assembly methods. ...
-
based in UNITED KINGDOM
Leading Edge Protection (LEP) helps to combat leading edge erosion which is the single largest problem in relation to maintenance within the wind ...
-
Manufactured by Imam Ambiente s.r.l.based in ITALY
Vertical or Horizontal Wind Turbines use the kinetic energy of the wind to generate electricity. First kinetic energy is converted into mechanical energy, which is then converted by a generator to electrical energy. The efficiency of wind turbines depends on 3 major factors: wind power, blade aerodynamics and air density. Generator can be connected directly to the rotor winding (Direct drive), or ...
-
based in UNITED KINGDOM
Our clients receive expert guidance and support in response to their individual blade damage assessments. We ensure our clients have the most effective, cost-efficient and high-quality solutions available to them for every requirement. ...
-
by Aeronesbased in USA
Aerones provides inspection services with robotic tools to identify problems with wind turbine blades. Pre-commission due diligence and OEM end-of-warranty inspections are important for the optimal performance and health of wind turbines. Our technology allows you to build a full digital twin of your wind turbines which gives an unprecedented insight of the status of your wind ...
-
by XPRT Techbased in SPAIN
Harness the power of wind with the XPRT Tech Advanced Wind Turbine. Designed for maximum efficiency and durability, this wind turbine converts wind energy into clean, renewable electricity, reducing your carbon footprint and energy costs. Its innovative design ensures optimal performance in a variety of wind conditions, making it a reliable energy solution for both urban and remote areas. Invest ...
-
Manufactured by Innoventum ABbased in SWEDEN
Dali PowerTower Performance is a hybrid power plant designed to maximize efficiency in local energy production. The wind turbine and solar panels are installed on a design and patent-protected 12 m Dali XII wooden tower. Dali PowerTower Performance is an excellent choice for many applications. The turbine can supply renewable electricity to summer cottages, villas, lighting or other electrical ...
-
Manufactured by Torque Wind Turbinebased in NETHERLANDS
The Torque Wind Turbine's dynamic blade design optimizes the conversion of wind energy while moving with the wind and minimizes the loss of energy while moving against the wind. Unique in the world and developed for decentral electricity production near the ...
-
Manufactured by Anakata Wind Power Resources Ltdbased in USA
The rotor is the first phase of the energy transformation process from kinetic wind energy into mechanical torque, and as such is where investment in technology should be maximised. Aerodynamics is overlooked by many wind turbine designers because they do not understand what is possible; as such they continue to use out-dated technology and design ...
-
Manufactured by Nidec Industrial Solutionsbased in ITALY
Wind is complex. It doesn’t just blow from the front or the side. To describe the wind feeding a wind turbine, at least seven quantities are needed: speed, direction, vertical shear, horizontal shear, veer, vertical velocity, and turbulence level. Knowledge of these quantities helps maximize turbine performance, and life. It also helps explain why some neighboring turbines perform ...
-
by Aeronesbased in USA
Embrace the innovation in wind turbine blade repair. Robotic tools help wind turbine technicians to perform a large scope of services quick and efficient. Minimize downtime of the turbines and protect your blades of erosion up to Level ...
-
Manufactured by Fiberline Composites A / Sbased in DENMARK
Our pultruded blade root reinforcements combine unique strength and design freedom. The profiles are custom-made and ensure a quicker and more cost-efficient high-quality lamination ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you