Wind Turbine Control Equipment For Wind Energy
-
Manufactured by FuSystems SkyWind GmbHbased in GERMANY
The SkyWind NG is the very first micro wind turbine designed with the same passion and expertise currently known only from large scale megawatt turbines. Key aspects are its high power and durability at comparatively small size and weight. Its patented all metal design provides unique strengh and an unmatchable service life. Every turbine consists of a turbine with rotor and grid inverter (230V ...
-
Manufactured by DEIF A/Sbased in DENMARK
Heavy duty cut-in controller for asynchronous generators. The new generation of DEIF’s Thyristor Control Module (TCM-2) is very robust and designed to endure the harsh environment in a wind turbine. The TCM-2 is applied as a soft starter for connecting the turbine generator to the grid. DEIF TCM-2 is the most robust control solution for soft grid connection. The TCM-2 includes very advanced ...
-
Manufactured by XEMC Darwind BVbased in NETHERLANDS
The XV90-2MW is at this time the smallest turbine in the Darwind product portfolio. The XV90 is a wind turbine with a nominal power of 2MW and a three bladed rotor with a diameter of 90 meters. The standard hub height is 80m and can be raised up to 140m. The sealed nacelle makes the XV90 very suitable for low wind onshore, near shore and desert ...
-
Manufactured by XEMC Darwind BVbased in NETHERLANDS
The XD115-5MW is designed with offshore application foremost in mind. As such it is the first offshore dedicated multi MW Direct Drive permanent magnet generator wind turbine, based on in-house proven ...
-
based in USA
The WindFloat® is a semi-submersible, three-column floating platform compatible with any standard offshore wind turbines and suitable for deployment in waters deeper than 40 m. ...
-
Manufactured by KK Wind Solutions A/Sbased in DENMARK
Designed to meet the requirements in wind turbines and renewable energy application, our controller combines long lifetime and stable operation with industry-leading connectivity. The CM60 is a core member of the sixth generation control system known as WTC6, developed by KK Wind Solutions. It is typically used as main controller in wind turbine control systems, but can be used for other ...
-
Manufactured by DEIF A/Sbased in DENMARK
The AWC 500 Advanced Controller (PLC-based PAC) is the latest addition to our AWC controller series. AWC 500 offers an unprecedented and unrivalled level of robustness. Not only on mechanical and electrical parameters does the AWC 500 constitute the most robust solution in the industry. The controller is suitable for cold climate or extended temperature operation. With its embedded real-time ...
-
based in UNITED KINGDOM
The commissioning of a wind turbine is a key service within a defined 4-stage process, during the construction/installation of a wind turbine. Once constructed, the commissioning begins on a wind turbine, and is the core element in ensuring your wind turbine is able to function correctly, and provide its most efficient AEP (Annual Energy Production). ...
-
Manufactured by DEIF A/Sbased in DENMARK
Normally, a controller platform requires a new designed controller system and a fitted relay to protect the connection to the grid. DEIF Wind Power Technology has with resources in UK managed to integrate all the vital functions into one complete Grid Protection Module (GPM5·1) to fit into the AWC 500. ...
-
Manufactured by Senwei Energy Technology Incbased in CHINA
5kw household variable pitch wind turbine manufacturer, China supplier-SENWEI ENERGY as the best quality small wind turbine generator manufacturer, already has a good reputation abroad, especially in European countries such as Italy, France, Britain, Ireland, Austria, Poland, Denmark and so on. They praise the technical stability of our SWT-5KW variable pitch wind turbines. They are familiar with ...
-
Manufactured by Supreme Power Solutions Co., Ltd. (SPS)based in CHINA
SPSCAP SCE-SPD series refers to the SCE products whose output type is soldering pillar with terminals on one side . Its rated voltage is 2.7V, capacity range from 350F to ...
-
Manufactured by TESUPbased in TURKEY
TESUP Wind Turbine Charge Controller is designed to convert AC (Alternating Current) to DC (Direct Current) and controls battery and inverter charging. It is the best controller with fully automatic turbine protection and a manual emergency break. It increases the life and stability of the whole system significantly, especially the batteries. It is designed and manufactured by TESUP, World's ...
-
Manufactured by Electria Windbased in SPAIN
Medium Power Wind Turbine, Synchronous / Permanent Magnet, Pitch Control, Full Power Converter, Directly Connected to Distribution ...
-
Manufactured by ERLPhase Power Technologies Ltd.based in CANADA
The S-PRO sub-harmonic protection relay protects generators, wind turbines, and SVC equipment from uncontrollable sub-harmonics which ...
-
Manufactured by Wind Technik Nord GmbHbased in GERMANY
As a further development of our proven WTN250, there is now variable speed control via a full converter. This allows compliance with all network guidelines and makes the WTN250i even more ...
-
Manufactured by Royall Power, by Royall Products, LLCbased in USA
Designed for commercial wind turbine installations where total monitoring is required. Available standard as an easy to tilt ground mount or a roof mount stand with legs or ballast. Our wind turbines can be configured to match any site or wind condition. With our blade designs and sizes, multiple tiers and blade configurations, we can supply you with the proper wind turbine system for your ...
-
Manufactured by Spica Technology ApSbased in DENMARK
By replacing your old wind turbine control system with the Spica SCS Retrofit Wind Turbine Controller in your ageing turbine, you can reduce downtime and optimise performance as troubleshooting becomes faster and more qualified. With the Spica SCS Retrofit Controller, wind turbine owners can replace their old control system with a new wind turbine controller that offers the latest standards in ...
-
Manufactured by Eocyclebased in CANADA
The M-21 is a workhorse for your microgrid, designed and built for the most extreme climates in the most remote locations—strong gales in northern Scotland, humid trade winds in the Pacific, icy winds in Alaska and hot thunderstorms in Singapore. A tilt-up tower makes the M-21 100% ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you