Only show results available in Virginia? Ok

Wind Turbine Gearbox equipment for Wind Energy

  • Vertical or Horizontal Wind Turbines

    Vertical or Horizontal Wind Turbines use the kinetic energy of the wind to generate electricity. First kinetic energy is converted into mechanical energy, which is then converted by a generator to electrical energy. The efficiency of wind turbines depends on 3 major factors: wind power, blade aerodynamics and air density. Generator can be ...

    By Imam Ambiente s.r.l. based in Torino, ITALY.

  • Winergy - Journal Bearings for Wind Gearboxes

    By introducing the journal bearing technology for its gearboxes Winergy sets another milestone for the wind turbine drive technology. Bearings belong to the critical wear parts of wind gearboxes as they are exposed to high loads in operation and therefore have a significant impact on the overall gearbox reliability. As journal bearings have proven ...

    By Winergy AG based in Voerde, GERMANY.

  • W2E - Model 93/2.0 - Wind Turbine

    Rated power: 2.05 MW. Rotor: 93 m. Wind class: IEC 2a. Cut-i wind speed: 3.5 m/s. Rated wind speed: 12 m/s. Cut-out wind speed: 25.0 m/s. Capacity factor*: 3,701 h, 42%. Sound power: 104.5 dB(A). Hub height tubular tower: 70 m | 85 m - 100 m. Drive trai concept - LARUS Compact: Mai gearbox i combinatio with torque bearing as a Plug & ...

    By W2E Wind to Energy GmbH based in Rostock, GERMANY.

  • Optimizing Wind Turbines With Digital Gearboxes

    Digital Gearbox by Winergy increases the efficiency of wind turbines. Our gearboxes can be run with optimum torque and rotation rate by digitalizing and analyzing their operating data. As a result either the power output  or the gearbox service life can be increased. The benefit for wind farm operators: minimized Levelized Cost of Energy ...

    By Winergy AG based in Voerde, GERMANY.

  • Seamless Rolled Rings

    Seamless rolled rings for wind turbine GEARBOXes and BEARINGs

    By ULMA Piping based in Oñati (Gipuzkoa), SPAIN.

  • Windflow - Model 500 - Wind Turbines

    Windflow light weight and cost-effective design. The Windflow 500 turbine is a 500 kW, two-bladed turbine with a 33 m diameter rotor.  Its light weight, innovative design is cost-efficient and reliable, and suitable for a variety of terrain and wind farm sizes. It is certified IEC class 1A and nearly 100 turbines are field-proven in strong ...

    By Windflow Technology based in NEW ZEALAND.

  • VENSYS - Model 1.5 MW - Gearless Wind Turbines

    Gearless and with permanent magnet technology instead of excitation power and gearbox losses. With an air-cooled generator and air-cooled VENSYS frequency converter for the most varied grid requirements.

    By Vensys Energy AG based in Neunkirchen / Wellesweiler, GERMANY. from Gearless Wind Turbines Product line

  • SoyutWind - Model 2000 - Wind Turbines

    Optimum Wind Speed 12 m/s. Cut – in Wind Speed 3 m/s. Cut – out Wind Speed 25 m/s. Rotor Diameter 80 m. Swept Area 5.026,5 m2. Tower Height 80 – 100 m. Temperature -20 – 50 oC. Blade Type Fiberglass, composite. Tower Type Conical Steel / Composite Coating . Over Steel Lattice. Control System PLC. Yaw System (Wind ...

    By SOYUT Enerji A.S. based in Sincan, TURKEY. from Wind Turbines Product line

  • Planetary Wheel With Journal Bearing

    By introducing the journal bearing technology for its gearboxes Winergy sets another milestone for the wind turbine drive technology. Bearings belong to the critical wear parts of wind gearboxes as they are exposed to high loads in operation and therefore have a significant impact on the overall gearbox reliability. As journal bearings have proven ...

    By Winergy AG based in Voerde, GERMANY.

  • DeWind - Model D8.2 - Wind Turbine

    Alterations in network compatibility requirements and the specific demands of the US market: the DeWind 08.2 adds crucial components to the range of systems know-how at DeWind. The demand for network compatibility, the stringent requirements in terms of the quality of the power generated and the widespread acceptance of synchronous generators in ...

    By DeWind Co based in Irving, TEXAS (USA).

  • SUREnergy - Model 100kW - Wind Turbine

    Small Industrial Sites, Small Communities and Municipalities School Commercial Farms or Remote Village Wind Diesel Power Systems. The 100kW unit is a technological masterpiece with its innovative gearless design best in class reliability and pleasing aesthetics. The turbine is optimized for low wind speeds so you don’t have to live in a wind ...

    By SUREnergy based in Sandusky, OHIO (USA).

  • SoyutWind - Model 1000 - Wind Turbines

    Optimum Wind Speed 12m/s. Cut-in Wind Speed 3m/s. Cut-out Wind Speed 25m/s. Rotor Diameter 70 m. Swept Area 3.848,5 m2. Tower Height 58 - 70 m. Temperature -20 - 50 oC. Blade Type Fiberglass, composite. Tower Type Conical Steel / Composite Coating Over Steel Lattice. Control System PLC. Yaw System (Wind orientation control) Electrical. Pitch ...

    By SOYUT Enerji A.S. based in Sincan, TURKEY. from Wind Turbines Product line

  • Model PMG 1650 – 6300 KW, 11 – 17 RPM - Low-Speed Direct-Drive Permanent Magnet Generators

    The Switch low-speed, direct-drive PMGs operate without any gearbox and fast-rotating parts. The typical speed range is between 10 rpm and 20 rpm. The simple construction with fewer components lead to increased reliability and superior drive train efficiency. All generators can be designed with a segmented stator construction. This provides ...

  • VENSYS - Model 2.5 MW - Gearless Wind Turbines

    With a significant increase in performance – and yet so compact. With a rotor diameter extended to 100, 109 and 112 meters for most high wind and low wind sites. The VENSYS 2.5 MW platform is the solution for the multi-megawatt range. Gearless and with permanent magnet technology instead of excitation power and gearbox losses. The full ...

    By Vensys Energy AG based in Neunkirchen / Wellesweiler, GERMANY. from Gearless Wind Turbines Product line

  • High Capacity Cylindrical Roller Bearings

    SKF high-capacity cylindrical roller bearings  have the high load carrying capacity of full complement bearings and the high speed capability of bearings with a cage. They are designed for applications such as industrial gearboxes, gearboxes in wind turbines and mining equipment.

    By SKF based in Göteborg, SWEDEN. from High Capacity Cylindrical Roller Bearings Product line

  • DeWind - Model D9.1 - Wind Turbine

    DeWind D9.1 is a model intended for international markets and designed to suit the 50 or 60-Hz grids. The turbines are equipped with a three stage gearbox, a permanent magnet synchronous generator, and an IGBT pulse width converter for various grid needs to meet various grid needs.The unit features an integrated transformer inside the nacelle for ...

    By DeWind Co based in Irving, TEXAS (USA).

  • Emrgy - Hydro Power Unit

    Our hydro units generate useful energy from small water flows. Unlike conventional hydropower which requires gravity drop and head pressure for effective operation, Emrgy’s technology optimizes only on the kinetic energy or velocity of the volume of water flowing through a channel. Much like a wind turbine placed underwater, the water flow ...

    By Emrgy Inc. based in Atlanta, GEORGIA (US) (USA).

  • AW - Model 2MW - Wind Turbine -100m or 93m Rotor

    The innovative design of the LARUS Compact drivetrain incorporates a simplified gearbox that reduces wear and tear on the machine, as well as drastically reduces the tower head weight of the nacelle.  The majority of wind turbine failures happen within the gearbox, the LARUS Compact® design includes a reduced number of moving parts, ...

    By Aeronautica Windpower, LLC based in Plymouth, MASSACHUSETTS (USA).

  • Eno - Model 126 | 3,5 MW - Wind Turbine

    The optimized aerodynamic rotor together with the advanced carbon fibre technology of the eno 126 are the reason for the high-level optimisation of economic efficiency and charge reduction. Special innovative detailed solutions, combined with a robust engine construction make the eno 126 to a solid long-term investment in the new generation of ...

    By e.n.o. energy GmbH based in Ostseebad Rerik, GERMANY. from Wind Turbine Product line

  • Model V117-4.2 MW - Wind Turbines

    V117-4.2 MW is designed for extreme wind conditions, making new sites possible for wind energy projects. Applying the existing upgraded gearbox from V136-3.45 MW and V126-3.45 MW Htq, the V117-4.2 MW strengthens the 4 MW platform’s performance in extreme wind conditions expanding reach into areas with very strong wind and typhoon type ...

    By Vestas Wind Systems A/S based in Aarhus N, DENMARK.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you