Wind Turbine Control (Wind Turbine Monitoring) Equipment
-
PremiumManufactured by Qingdao Leice Transient Technology Co., Ltd.based in CHINA
control to reduce fan load. It is of great significance to improve wind turbine power generation efficiency, reduce wind turbine load and failure rate, and prolong wind turbine service life. It’s certified by DNV-GL in Germany with high accuracy of wind ...
-
Manufactured by Orbital A/Sbased in DENMARK
Orbital´s TMC3 wind turbine is designed to stall-regulate wind turbines. A cost effective all-in-one controller ...
-
Distributed by First Sunergy LLCbased in USA
Our company has been engaged in wind power generation for over 20 years and we made continuous updating relying on the practical experience for many years and in accordance with the characteristics of wind power generation. This system runs safely, stably and reliably with high work efficiency and long service life. Grid connection wind ...
-
Manufactured by Leading Edge Turbines Ltdbased in UNITED KINGDOM
Our 500w dump load is utilised to ‘bleed-off’ excess power from your off-grid power system when your battery bank is fully charged. These 500w dump loads are designed to be connected to either our 45A diversion controller or 60A diversion controller working off a 12v or 24v off-grid power ...
-
Manufactured by Leading Edge Turbines Ltdbased in UNITED KINGDOM
Our 1000W dump load is utilised to ‘bleed-off’ excess power from your off-grid power system when your battery bank is fully charged. These 1000w dump loads are designed to be connected to either our 45A diversion controller or 60A diversion controller working off a 24v or 48v off-grid power ...
-
Manufactured by Aria srlbased in ITALY
The Libellula wind turbines are equipped with a remote control system, using a Short Message Service (SMS) designed to send and receive messages to/from a control terminal (mobile phone or other GSM connected equipment). The system allows a very simple use even with a mobile phone that can be used in order to receive messages and ...
-
Manufactured by DEIF A/Sbased in DENMARK
Switch-mode charger for battery bank and ultra-capacitors. The PBC is a robust switch-mode charger designed for charging and maintaining full-charge condition for different variants of battery banks and ultra-capacitors. The PBC can be ordered with voltage levels from 300 to 360 VDC, temperature controlled output for battery or fixed ...
-
Manufactured by DEIF A/Sbased in DENMARK
Robust pitch controller for responsive positioning of blades, with battery charge and energy monitoring. The DEIF Pitch Motion Controller is based on AWC platform (Advanced Wind Turbine Controller), the controller can be customized with the needed number of inputs and outputs. The pitch motion ...
-
Manufactured by DEIF A/Sbased in DENMARK
Wind turbine pitch servo drive with integrated safety, distributed I/O and cold climate specifications for robust pitch systems. The IMD-100 is a robust motor drive with integrated safety and distributed I/O to be used as pitch servo drive for wind turbines from kW to MW range. The servo drive has cold climate specifications ...
-
Manufactured by Maxwell Technologies Korea Co., Ltd.based in SOUTH KOREA
Maxwell Technologies’ 16V small cell ultracapacitor module provides energy storage and power delivery in a compact, cost-effective module. The modules are specifically engineered to provide cost-effective solutions for wind turbine pitch control of 1.5MW and smaller, small UPS systems, telecommunications and other lighter-duty ...
-
Manufactured by Maxwell Technologies Korea Co., Ltd.based in SOUTH KOREA
Maxwell Technologies’ 160V module is designed to provide energy storage and power delivery for wind turbine pitch control, short-term uninterrupted power supply (UPS) and renewable energy systems. Primarily designed for pitch control systems for 1.5 to 6MW wind turbines, the 160V module ...
-
Manufactured by Senwei Energy Technology Incbased in CHINA
20kW variable pitch wind turbines are the most commonly used commercial applications in grid-connected systems of wind power generation. Among them, more than 50sets SENWEI-branded wind turbines with variable pitch controlled 20kW were installed in Italy in 2012, and more than 20sets 20kW pitch ...
-
Manufactured by Senwei Energy Technology Incbased in CHINA
SWT-10KW variable pitch wind turbine has been installed and used in large quantities in developed countries and regions such as the United States, Austria, Canada, Britain, Ireland, Spain, Denmark, Latvia and so on because of it with it's good performance. This shows that for the small variable pitch controlled wind ...
-
Manufactured by Shanghai Aowei Technology Development Co., Ltd.based in CHINA
Through CE, RoHS and UN3499 certification, it has extremely high power density, wide working temperature window (-40-65 C), and its cycle life at 1.35 to 2.7V is up to 1 million times. It adopts multiple protection design, which is safe and reliable, and can be applied to tram, metro, hybrid electric vehicles and energy-saving elevator, pulse device and so ...
-
Manufactured by Supreme Power Solutions Co., Ltd. (SPS)based in CHINA
SPSCAP SCE-SPD series refers to the SCE products whose output type is soldering pillar with terminals on one side . Its rated voltage is 2.7V, capacity range from 350F to ...
-
Manufactured by Maxwell Technologies Korea Co., Ltd.based in SOUTH KOREA
Maxwell Technologies’ DuraBlue® Advanced Shock and Vibration Technology combines Maxwell’s patented electrode formulation and manufacturing process with a robust proprietary cell structure, resulting in a product line specialized for the most demanding shock and vibration requirements of the industrial and transportation ...
-
Manufactured by Royall Power, by Royall Products, LLCbased in USA
Designed for commercial wind turbine installations where total monitoring is required. Available standard as an easy to tilt ground mount or a roof mount stand with legs or ballast. Our wind turbines can be configured to match any site or wind condition. With our blade designs and sizes, multiple tiers and blade ...
-
Manufactured by YUNASKO LTDbased in UNITED KINGDOM
High energy performance with low heat generation and safe operation. Active voltage balancing system. Temperature ...
-
Manufactured by XEMC Darwind BVbased in NETHERLANDS
The XV90-2MW is at this time the smallest turbine in the Darwind product portfolio. The XV90 is a wind turbine with a nominal power of 2MW and a three bladed rotor with a diameter of 90 meters. The standard hub height is 80m and can be raised up to 140m. The sealed nacelle makes the XV90 very suitable for low wind onshore, near ...
-
Manufactured by XEMC Darwind BVbased in NETHERLANDS
The XD140 onshore 4MW turbine is derived from the offshore dedicated XD115 model. With a larger rotor diameter and designed for lower average wind speeds (compared to its predecessor), this turbine brings the benefits of the XD115 design to the onshore locations. The focus remains on fast installation and low maintenance. Hub heights can go ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you