Only show results in Texas? Ok

Wind Turbines Applications

  • Premium

    Industrial gas detection solutions for wind turbines / power generation industry

    DOD Technologies provides products in various applications that utilize, manufacture, or expel toxic, corrosive, and combustible gases. However, we also provide solutions outside of gas detection. Wind turbines utilize large blades propelled by the wind to generate renewable energy. One major challenge with wind is that it doesn’t come from the same direction every day. Therefore, wind turbines are fixed to rotating head that can optimize the collection of wind energy. This rotating head utilizes bearings...

    By DOD Technologies Inc based in Cary, ILLINOIS (USA).

  • Premium

    VOC abatement equipments for power generation & distribution

    Create more efficient power production.

    By Munters based in Amesbury, MASSACHUSETTS (USA).

  • Premium

    Meteorological sensors for wind turbine control

    Higher, more robust, more reliable: Parallel to the growing requirements for wind turbines, the requirements for monitoring sensors grow as well. But how can wind sensor manufacturers fulfil these wishes? The ideal sensor has both a high degree of precision and a long, maintenance-free useful life under the most extreme of conditions. While mechanical anemometers were initially used in turbines, most producers around the world have since switched to ultrasonic anemometers without moving parts as part of their...

    By OTT HydroMet based in Kempten, GERMANY.

  • Sonic detection and ranging technology solution for wind energy industry

    Wind Energy has brought new life to the wind measurement industry, including SoDAR. With wind turbine hub heights reaching over 100m and blade spans of up to 80m, measurements across the entire blade swept area are becoming critical. SoDAR provides that information and ASC`s SoDARs offer more.

  • LIMPET Offshore Personnel Transfer System

    Limpet Technology is embarking on the development of a new access solution that focuses on allowing technicians and loads to transfer between vessels and offshore wind turbines more safely and in higher sea states. The overarching technical objective is to deliver a solution that can be proven to deliver safe and reliable access to and from offshore wind turbines in sea states up to and beyond 2.5 metres Significant Height (Hs).

    By Limpet Technology based in Edinburgh, UNITED KINGDOM.

  • Wind Turbines for Communications

    The need to communicate and the ways to communicate are expanding well beyond the limits of standard utility power grids. Superwind turbines allow our customers to power those crucial ‘off-grid’ communications sites, towers, repeater systems, satellite ground stations and even sub-sea fiber optic cables. Our integration partners can help you design your next off-grid project by determining if a wind turbine is appropriate for the site and power needs, and if so, they can help you to determine the best...

    By Superwind GmbH based in Brühl, GERMANY.

  • Instant OPEX savings for off-grid and DG supported telecom tower infrastructure

    With modular design and robust operating capabilities, Firefly’s Hybrid Systems are easily retrofitted onto existing infrastructure, resulting in reduced diesel use, longer servicing intervals and extended DG operating life.

    By Firefly Hybrid Power Ltd based in East Kilbride, UNITED KINGDOM.

  • Ice blasting technology for power generation

    The Coulson Ice Blast’s IceStorm product line cleaning technology has been a proven tool in the power generation industry. By using a combination of regular wet ice and/or dry ice media, Coulson’s Ice Blasting equipment cleaning technology can decrease downtime by providing a more effective cleaning tool and also presents a cleaner finished product.

    By Coulson Ice Blast based in Port Alberni, BRITISH COLUMBIA (CANADA).

  • Wind Turbines for Remote Houses and Shelters

    Powering remote houses and mountain shelters are also typical applications for Superwind turbines. Placed on cliffs or mountain crests, these high turbulence sites are challenging for a small wind turbine and approriate technology should be in place. For these sites, our turbines Superwind 353 and Superwind 1250 with the STAR Hub™ are the preferred choice.

    By Superwind GmbH based in Brühl, GERMANY.

  • Wind Energy Meteorology

    As the world addresses the challenges of global warming green energy production and in particular wind energy generation has increased significantly. Biral can provide sensors for the control of aviation obstacle light intensity, wind speed measurement and site assessment. The Deutscher Wetterdienst (German Meteorological Service – DWD) has certified the VPF-710, SWS-100 and SWS-200 sensors as suitable for use in visibility controlled wind turbine obstruction light systems.

    By Bristol Industrial & Research Associates Ltd (BIRAL) based in Portishead, UNITED KINGDOM.

  • Wind Turbine and Generator

    Stanford Magnets provide high quality neodymium magnets used in large scale in commercial wind turbines to ensure high energy-efficiency and good reliability for the whole generator systems.

    By Stanford Magnets based in Irvine, CALIFORNIA (USA).

  • On-demand renewable energy to assist solar/ wind microgrids

    Our Power Pallet biomass gasifier genset, when used with the grid-tie module, can be integrated with an existing 3-phase AC microgrid that includes intermittent electrical sources such as solar panels or small wind turbines.

    By All Power Labs based in Berkeley, CALIFORNIA (USA).

  • Weather Monitoring Systems for wind energy sector

    Wind power is now the world`s fastest growing alternative energy source and has also become one of the most rapidly expanding industries. For over 40 years, Climatronics has been a leading developer and manufacturer of wind measurement sensor technology to the growing wind power generation market. We offer precision weather sensors for wind energy applications such as wind resource assessment, wind turbine generator control, and wind farm performance management.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Adhesive technology solution for renewable energies industry

    The debate around the phase-out of nuclear power has highlighted it once again: there`s no getting away from renewable energy. Improvements in efficiency and performance are the challenges that manufacturers must now face. And it is precisely here that the innovative adhesive technology from Lohmann plays an important role. The more reliably and efficiently components are connected, the longer-lived and more economical the overall system is – irrespective of whether energy is obtained from solar systems or...

    By Lohmann GmbH & Co.KG based in Hebron, KENTUCKY (USA).

  • Limpet Wind Energy Solutions

    We are working with major turbine OEMs, energy utilities and technical service specialists to reduce operations and maintenance costs and increase availability of wind turbines through the deployment of Limpet safety systems. Key applications for Limpet® systems include:

    By Limpet Technology based in Edinburgh, UNITED KINGDOM.

  • Fabrication solutions for the wind energy industry

    Modern wind turbines include a variety of components from BRÜCK. Our products are found in the power transmission in the form of bearings, flanges, gear and generator parts as well as in the pitch and gondola housing. Due to our vast depth in manufacturing and the enormous production capacity, we can cover the usual in the wind power industry requirements and high demands in the situation. Many global players in the wind energy sector benefit from BRÜCK proposed solutions for structural design of...

    By BRÜCK GmbH based in Saarbrücken-Ensheim, GERMANY.

  • Hydrokinetic Turbines for Energy efficiency management

    Predictable and reliable, hydrokinetic energy is a promising lever for the energy transition. HydroQuest has studied opportunities for hydrokinetic turbine development since 2010. Our ambition is to become a global reference in the development of innovative technology to harness hydrokinetic resources. This is a new alternative energy supply as promoted by the Energy Transition law to encourage renewable growth.

    By HydroQuest SAS based in Meylan, FRANCE.

  • Software Solution for Renewable Energy

    Protect crews and assets from dangerous lighting and wind risks with our suite of wind solutions from DTN. Real-time visuals, GPS alerts, and reports for adverse weather headed your way keep your wind farm operating safely and at max capacity.

    By WeatherOps powered by DTN based in Minneapolis, MINNESOTA (USA).

  • Wind Turbines for Transportation & Rail

    Superwind is trusted and recommended equipment on many of the world’s railroads, airports, autobahns and port supply centers. As the world routes more people and cargo to destinations the utility grid cannot reach, superwind will help bridge the gap for sites with consistent wind by generating reliable electrical power. Our completely autonomous and very low maintenance wind turbines are a perfect fit for hard to reach places on busy highways or at distant rail crossings. With proper installation, a Superwind...

    By Superwind GmbH based in Brühl, GERMANY.

  • Wind Turbines for Safety & Security

    Superwind turbines have been powering seismic and tsunami detectors as well as lighthouses for well over a decade. In that time we have also powered campus security systems, pipeline sensors systems, automatic gates, and a wide assortment of the world’s audio and video camera & surveillance systems – Fire watch stations and Ski Resort Rescue shelters, for example. We even power remote public ‘safety zone’ lighting and emergency call boxes. We are also pleased that our equipment has...

    By Superwind GmbH based in Brühl, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you