In Order to Play a Role in the Production Process of LED Tri-proof Luminaires, Reasonable Maintenance is Very Important, So How Do We Maintain It?

1. Do not clean the LED tri-proof luminaires with water, just wipe it with dry cloth and water. If you don't touch the water carefully, wipe it as dry as possible. Don't wipe it with wet cloth immediately after turning on the lamp.

2. LED tri-proof luminaires in use also need to strengthen maintenance, ability to extend its service life. The lamp tube of the room should be scrubbed with dry cloth frequently, and pay attention to avoid moisture invasion, so as to avoid the phenomenon of corrosion damage or leakage short circuit for a long time; the lamp installed in toilets and bathhouses should be equipped with a damp-proof lamp shade, otherwise it will greatly shorten the service life; the lamp installed in the kitchen should pay special attention to oil smoke prevention, because the accumulation of oil dirt affects the brightness of the lamp; the light-colored lamp shade has a good transmittance, but it is simple. Dust, to be diligent in scrubbing, in order to avoid affecting the penetration of light; if lamps are non-metal, can be wiped with wet cloth, in order to avoid dust accumulation, affecting the lighting effect.

3. Humidity can easily lead to rust and paint dropping of lamps and lanterns, and shorten the service life of lamps and lanterns. Therefore, moistureproof is the key to the maintenance of lighting, especially the bathroom, bathroom lamps and kitchen stove headlights, should be equipped with moistureproof lampshades to avoid moisture invasion, to avoid rust damage or leakage short circuit.

4. When using the LED tri-proof luminaires, try not to switch on and off frequently, because the current passing through the filament is greater than the current in normal operation at the moment of frequent starting, which makes the filament temperature rise sharply and accelerate sublimation, thus greatly reducing its service life. Therefore, the switch of the lamps should be reduced as far as possible.