Energy industry Software

The CADET Edge is part of the CADET range of control systems, designed specifically for dynamometer control and engine throttle actuation. The CADET system can actuate eddy current, hydraulic, AC or DC dynamometers and will be supplied with the appropriate power modules.

By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

The 2D Dynamics module is an extension to PLAXIS 2D. Geotechnical applications require advanced constitutive models for the simulation of the non linear, time dependent and anisotropic behaviour of soils and/or rock. Although the modelling of the soil itself is an important issue, many projects involve the modelling of structures and the ...

By Plaxis B.V. based in Delft, NETHERLANDS. from PLAXIS 2D Software line

3DynaFS-Comp - The 3DynaFS compressible flow module solves the Euler equations using a 2nd order Godunov-type method to capture accurately the location of discontinuities such as shock waves and contact surfaces. The code uses a Level Set method and a mixed cell algorithm to simulate multi-phase and multi-material flows. A general Equation of ...

By Dynaflow, Inc. based in Jessup, MARYLAND (USA). from 3DynaFS Software line

The CFD software for wind modelling  in urban areas, or any builtenvironments.The outdoor climatic comfort module is dedicated to local authorities, architects, developers, urban planners, designers, landscapers. Itdetermines the areas of possible wind discomfort to make outdoor spacesmore pleasant and safer for its users.  The Natural ...

By Meteodyn based in Nantes, FRANCE.

1-6 September 2014 – Kassel (Germany) Content This Wind Energy course will consist of a theoretical aspect made up of lectures, presentations, and exercises along with a practical aspect where participants will have the chance to visit a German manufacturer of a wind power plant and take part in a sight tour of a wind farm and climb a wind ...

By German Academy for Renewable Energy and Environmental Technology based in Berlin, GERMANY.

GeoLogik SF is a program for calculating heat flow in the underground. The software is designed for shallow (means few 100 m) geothermal arrays of borehole heat exchangers (BHE). A finite element (FE) method is used for the underground model.

By GeoLogik Software GmbH based in Braunfels, GERMANY.

The engineering design of pressurized pipelines is a complex, time-consuming task. It requires compliance with a daunting number of design criteria, including pipeline minimum slope, maximum spacing between air release valves, intersection with existing utilities, and pipe cover. Meeting these criteria, along with quality assurance standards, ...

By Innovyze based in Broomfield, COLORADO (USA). from Pipeline Design Software line

FEDEM Windpower is a powerful simulation tool for dynamic analysis of complete wind turbine systems, both onshore and offshore. Wind field and wave loads, structural models (beam, shell and volume elements), advanced soil description and complete control system - everything fully integrated in one fast and user friendly software. FEDEM Windpower ...

By Fedem Technology AS based in Trondheim, NORWAY.

proWAVE software is an Oceanlinx tool which allows one to model a wave energy converter (WEC) as a fully integrated system including oscillating water column (OWC), turbine, generator, flywheel, and all manner of controls features.

By Oceanlinx Limited based in Macquarie Park,, AUSTRALIA.

Meteo-Logic provides a unique approach to power forecasting, based on power production history, thus avoiding the conversion of wind to power, which usually inserts a lot of noise into the calculation.

By Meteo-Logic Ltd. based in ISRAEL.

Optimization in general, is the search for a feasible operational policy that maximizes or minimizes the value of the objective function. Hydropower is non-linear function though the operation problems in hydropower are non-linear problems. The best solution to non-linear problems can be obtained by application of non-linear optimization ...

By Allocate based in Albany, NEW ZEALAND.

Our unique software, RomaxWIND, enables you to create and analyse drivetrain systems and gearboxes, and then accurately simulate their behaviour and performance to ensure you get the optimum final design.

By Romax Technology Limited based in Nottingham, UNITED KINGDOM.

Greensmith combines our best-in-class GEMS software with unparalleled industry expertise to deliver the world’s most advanced energy storage systems.

By Greensmith Energy Management Systems based in Herndon, VIRGINIA (USA).

The wind flow modelling software for wind resource assessment, Annual. Energy Production evaluation, site suitability and turbine layout analysis, energy production optimization, maintenance costs and turbines lifespan validation. A great number of wind farm developers, consultants, manufacturers, wind farm operators and investors already use ...

By Meteodyn based in Nantes, FRANCE.

An Excel 2003 spreadsheet that calculates unit settings to maximize energy production efficiency to meet either a specified electrical load or to achieve a specified discharge for small and medium sized hydro plants. The spreadsheet uses dynamic programming techniques. Developed with the assistance of Natural Resources Canada. Download the ...

By CddHoward Consulting Ltd. based in Victoria, BRITISH COLUMBIA (CANADA).

The large number of changes to the regulatory framework both now and in the future mean that the energy market is in a great state of flux. New, more complex and short-term legal transactions involve major challenges for all market participants. MTS SSO Contract and Capacity supports you in all tasks relating to the conclusion and management of ...

By ECG Erdgas-Consult GmbH based in Leipzig, GERMANY. from Storage Software line

3DynaFS-Bem is a general-purpose simulation tool for nonlinear dynamics of 3D free surface flows and their interactions with submerged or floating structures.

By Dynaflow, Inc. based in Jessup, MARYLAND (USA). from 3DynaFS Software line

MSI Wind Turbine Pro is a portable, non-intrusive predictive health monitoring system for the wind power industry. The system includes software and USB-powered data acquisition hardware, and works with any standard Microsoft Windows laptop. Temporarily attach the magnetically-mounted accelerometer to the tower base, record a snapshot of data, and ...

By Mechanical Solutions Inc. Testing & Troubleshooting based in Whippany, NEW JERSEY (USA).

To meet the needs of EGRT (Enhanced Geothermal Response Tests), leakage detection and seepage monitoring, AP Sensing developed a specific GeoDTS solution. A hybrid sensor cable containing copper wires for heat dissipation is installed together with the borehole heat exchanger, to determine temperatures along the entire length. Our specialized ...

By AP Sensing GmbH based in Böblingen, GERMANY.

COPA-DATA is an official and worldwide member of Microsoft’s CityNext initiative and profoundly contributes to establishing Smart Cities. Smart City solutions with zenon can considerably support governments and its citizens to face the challenges of tomorrow, especially in the areas of energy, water/waste water, public transportation and ...

By COPA-DATA based in Salzburg, AUSTRIA.