The Continuous Pyrolysis Plant: The Right Opportunity

The continuous pyrolysis plant features a screw feeding sealing system, which can be observed as high heat exchange efficiency and capacity. Its electrical product is also impeccably controlled. It realizes zero emissions and may be fed with any fuel. The new air flowing to the reactor gets hotter the fuel. The finished goods are clean and odorless. It could also be accustomed to recycle waste materials.

tyre shredder

The continuous pyrolysis plant with tyred shredder is a unique and highly-efficient method for processing tyre waste. It is one fully-automated system that directly feeds waste tyres in the furnace, thus ensuring safety and efficiency for your workers. This procedure also produces biogas that you can use to build electricity and generate heat for homes.

Screw automatic feeder

The continuous tyre-to-oil pyrolysis plant can automatically convert waste tires to fuel oil, carbon black, or steel wires. Its two main components are the tire crusher and also the screw automatic feeder. The tire crusher crushes the waste tires to small pieces and pretreats them. The screw automatic feeder transports these pieces on the pyrolysis plant, and also this equipment is used for the whole process. The screw automatic feeder can be a long and sealed screw conveyor that combines the crushing, pretreatment, and transporting of waste tires.

Horizontal pyrolysis reactor

A horizontal pyrolysis reactor is a vital area of the continuous petrochemical production process. In this particular process, plastic waste is transformed into fuel by pyrolysis. This process requires that the water content of the raw materials is lower than 15 %. Also, the content should be of the size that is not going to exceed 20 mm. This process uses a condenser system to cool the gas as well as to purify it. After it is finished, the residual oil gas goes to a condenser for recycling and disposal.

Condensing system

A condensing system in the continuous pyrolysis plant is used to cool oil gas produced during the pyrolysis process. You can find three stages in this particular process. A vertical condenser settles impurities, allowing a higher oil yield. Another step will be the oil-water separator, which prevents oil from recirculating and removes carbon black dust. The very last step will be the condensing tower, which liquefies any residual oil from your exhaust gas and returns it towards the combustion system for even more processing.

Oil tank

Continuous pyrolysis plant is a technology which converts waste plastics into fuel oil and carbon black. Fuel oil is used in metallurgical furnaces and marine boilers. There are numerous types of fuel oil. They are utilised in several industries including chemical industry, transportation, and light-weight industry. Fuel oil is likewise used being a heating fuel. Its service life is 68 years. A continuous pyrolysis plant features a tank for oil.

Tail gas purification system

A continuous pyrolysis plant is made up of several components, including a feeding system, a horizontal pyrolysis reactor, an oil tank, along with a combustible gas recovery system. The reactor receives the liquid fuel. RDF is loaded via a conveyor belt (16), which unloads the content into the receiving tank. The raw material is going to be fed in to the reactor using an auger feeder, which is equipped with a gate system. The machine also may include a pressure and temperature monitoring system, together with a PLC electric control system.