Only show results in Virginia? Ok

Energy from Biomass equipment for Bioenergy

  • Premium

    BIDOX - Biological Desulphurization of Gas Streams

    One of the most efficient systems for the biological removal of sulphides from biogas is the BIDOX (BIological Desulphurization by OXidation). No chemicals are needed to operate the BIDOX system. The installation requires limited maintenance, is equipped with little process control and manages to reduce the amount of H2S in biogas to levels below ...

    By Colsen International b.v. based in HULST, NETHERLANDS.

  • Premium

    ANDRITZ Vandenbroek - Model VDB - Rotary Drum Dryer

    The rotary drum dryer is suitable for drying woody biomass, agricultural products, and municipal solid waste (MSW). For the production of alternative fuels as well as in the area of waste-to-energy, ANDRITZ Vandenbroek rotary drum dryers are applied to decrease the moisture of the material to the desired level fo downstream process steps.

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA. from Thermal Systems - Drying Systems Product line

  • Premium

    Model BDS - Belt Drying System for Biomass

    Biomass drying - necessary pretreatment for further processes. ANDRITZ supplies the complete process, not only for sludge treatment, but also for biomass drying - from wet milling to drying, fine milling and pelleting, all from a single source.

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA. from Thermal Systems - Drying Systems Product line

  • Premium

    Evapco-BLCT - Air Cooled Condensers

    For steam cycles of 1 to 1000MW, EVAPCO-BLCT Dry Cooling can supply the Air Cooled Condenser that is right for your application. Irrespective of fuel source, biomass, fossil, or solar, an EVAPCO-BLCT Dry Cooling ACC can significantly reduce the water requirements of any power plant utilizing a steam cycle.

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Power Generation Product line

  • Premium

    KAHL Rotospray - Micro-spraying System for Biomass Pellets

    The KAHL Rotospray moistens solid matters with liquid additives thoroughly and still very economically. A rotating nozzle is the central part of the plant. A cone distributes the solid matters in the spraying chamber making sure that they are sprayed from all sides.

    By Amandus Kahl GmbH & Co. KG based in Reinbek, GERMANY. from Chemical Industry Product line

  • Premium

    RUF Briquetting System for Biomass - Briquetting of Biomass: 50-1300 kg/hr

    The RUF briquetting systems of the Biomass series process dust, shavings and wooden chips into briquettes of consistently high quality and density. Varying bulk densities are offset automatically during the process.The systems can be equipped with a multitude of options, thus optimally adapting them to customer needs. The Biomass series offers ...

    By Ruf Maschinenbau GmbH & Co. KG based in Zaisertshofen, GERMANY.

  • Premium

    Beltran - Biomass Gasification Technology

    Beltran's biomass gasification technology converts locally-sourced organic wastes into clean, efficient energy and valuable co-products, with dramatic reductions in CO2 and pollutant emissions. The Beltran Biomass Cogeneration System is an integrated, three-stage process that converts biomass and other organic wastes into powerful, clean-burning ...

    By Beltran Technologies, Inc. based in Brooklyn, NEW YORK (USA).

  • Premium

    KAHL - Straw Pelleting Plants

    Compact Energy; Pelleting of renewable raw materials for energy recovery has been a topic for KAHL for more than 30 years, after receiving corresponding research assignments following the energy crisis in the 1970's. Straw and dried forage pelleting plants have formed part of our delivery programme since then, too. So, we can rely on long-standing ...

    By Amandus Kahl GmbH & Co. KG based in Reinbek, GERMANY. from Biomass Pelleting Product line

  • Premium

    KAHL - Wood Pelleting Plants

    KAHL WOOD PELLETING - A high quality awareness establishes KAHL on the wood pellet market. For more than 30 years Kahl has dealt with this product and can offer a sophisticated process for the production of high-quality pellets with very good combustibility, now.

    By Amandus Kahl GmbH & Co. KG based in Reinbek, GERMANY. from Biomass Pelleting Product line

  • Premium

    KAHL - Fabric Belt Drier for Wood

    Intelligently Controlled for gentle drying of wood shavings and wood chips we have developed special belt driers ensuring: Optimum product quality amd Economic operation.

    By Amandus Kahl GmbH & Co. KG based in Reinbek, GERMANY. from Biomass Pelleting Product line

  • Containerised Systems

    Imperative Energy offers containerised systems which are manufactured off-site and come pre-assembled which minimises the level of infrastructure and civil works required on site.  These ‘plug and play’ units are built to CE standards and include all equipment such as biomass boiler, pumps, valves and expansion vessels as well as ...

    By Imperative Energy Ltd (IEL) based in Naas, IRELAND. from Other Product line

  • CelluTreat - Pre-Treatment of Biomass

    CelluTreat is our patented technology for the pre-treatment of biomass to produce sugars and cellulose suitable for further refinement. The technology is adapted to the specific conditions and different raw materials.

    By The SEKAB Group based in Örnsköldsvik, SWEDEN. from CelluTech Product line

  • Model 3SIE IE3 - Electric Motors

    BEVI electrical motors type 3SIE IE3 are produced in European factories inside EU. All factories are ISO 9001 certified. The motors in IEC frame size 56-112 are made of aluminum and frame size 132-315 in cast iron (frame size 132 can as an option also be made in aluminum). The motors are as standard wound with class F insulation material and the ...

    By Bevi AB based in Blomstermåla, SWEDEN. from Electric Motors Product line

  • Brake Motors

    In our range of electric motors, you will also find brake motors, both with AC- and DC-brakes. Basically we can assemble brakes on all electric motors in our catalogue.

    By Bevi AB based in Blomstermåla, SWEDEN. from Electric Motors Product line

  • Single Phase Motors

    Single phase motors can be supplied in many different executions. Also UL/CSA approved. We can in our workshop assist with optional accessories and executions such as thermo contacts, thermistors, anti-condensation heaters, forced ventilation and special bearings with high temperature grease.

    By Bevi AB based in Blomstermåla, SWEDEN. from Electric Motors Product line

  • Model 4A/3D - Electric Motors

    The 4A/3D series has a top mounted terminal box in all sizes. Thermistors are standard on frames 160 and up. This motor type is only IE1 efficiency and are not for use in EU according to ECO-directive.

    By Bevi AB based in Blomstermåla, SWEDEN. from Electric Motors Product line

  • Zehnder - Model AX - Electric Radiator

    Good interior design starts with well-designed radiators that subtly integrate and blend into any setting, just like Zehnder AX. This radiator inspires with its unassuming elegance and is available in vertical and horizontal formats as well as in single or double-layered versions. Available in almost any colour and finish from the Zehnder colour ...

    By Zehnder Group based in Surrey, UNITED KINGDOM. from Electric Radiators Product line

  • Tarmac - Bulk Material Drying System

    Tarmac International, Inc. manufacturers drying systems for most bulk commodities. Our design and engineering staff can provide a specific system or individual components determined by the overall objective and charactreristics of the feedstock. Systems are designed to meet or exceed all safety and electrical standards of each country. Available ...

    By Tarmac International, Inc. based in Lees Summit, MISSOURI (USA). from Bulk Material Drying System Product line

  • ATTSU - Model FTPM - Thermal Fluid Boilers

    The FT-CS boiler is a Thermal Fluid Generator, with Horizontal execution with three passes and high thermal efficiency. With power from 100 kW to 6.000 kW.

    By ATTSU TERMICA S.L. based in Cerla, SPAIN. from Thermal Fluid Boilers Product line

  • Model P1500 - Electric Heater

    Quiet and clean. No by-products of combustion, so it’s safe for many applications where air quality is of utmost concern. Variable settings will conserve energy. Does not add to relative humidity so it can used to assist dry out applications. Features an internal thermostat (30º – 100º F) 20 ft. power cord. Powder coat ...

    By Heat Wagon based in Valparaiso, INDIANA (USA). from Electric Heaters Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you