Acksen Ltd. products

The EC-7VAR-RS is a three-phase voltage and current data logger that uses three flexible Rogowski coils and 4 Voltage leads (L1, L2, L3 and Neutral) to connect to your supply.  Setup the Logger using the Electrosoft software, then fit it to the distribution board or other point on the system that you want to measure. It measures and records 3 phase voltage, 3 phase current and PF (power factor) on L1/A1. Allowing you to record kW, kVAR, kVA, peak demand, highest/lowest currents, highest/lowest voltages, PF all with dates and times.

The DC-3VA is a three-channel DC voltage and current data logger.  It records two channels of DC voltage (300Vdc) and one channel of DC current. Setup the Logger using the Electrosoft software, then fit it to the supply/equipment that you`re going to measure.

The EC-2VA is a single-phase voltage and current data logger that uses a flexible Rogowski coil and plug to connect to the mains supply/equipment you wish to measure.  Setup the Logger using the Electrosoft software, then fit it to the distribution board or other point that you`re going to measure.

The EC-3V is a three-phase voltage data logger that can record 1, 2 or 3 phases. Simply connect to your supply.  Setup the Logger using the Electrosoft software, then fit it to the distribution board or other point that you`re going to measure.

The EC-2V is a two-channel voltage data logger that needs to be plugged in to the mains socket you want to measure.  Setup the Logger using the Electrosoft software, then plug it in.

The EC-3A-RS is a three-phase dual range, 4A to 400A, 30A to 3kA current data logger that uses 3 flexible Rogowski coils to connect to your incoming supply.  Setup the Logger using the Electrosoft software, then fit it to the distribution board or other point that you`re going to measure.

The CT-1A is a single-phase current data logger that needs its CT connected to your incoming supply.  Setup the Logger using the Electrosoft software, then fit it to the distribution board or other point that you`re going to measure.