AK Stamping Company, Inc. products
Solar
AK Stamping - Solar Hardware Product
AK Solar Products is a leading provider of cost-effective and functional solutions for integrated PV module bonding and grounding hardware. Our world-class production technologies offer simplified installation and high reliability, to reduce solar installation balance of system costs.
AK Stamping - Solar Mid-Clamps and End-Clamps
AK Stamping Company is a leading provider of cost-effective and functional solutions for integrated PV module bonding and grounding hardware. Our world-class production technologies offer simplified installation and high reliability, to reduce solar installation balance of system costs.
AK Stamping - PV Module Bonding and Grounding Hardware
AK Stamping Company is a leading provider of cost-effective and functional solutions for integrated PV module bonding and grounding hardware. Our world-class production technologies offer simplified installation and high reliability, to reduce solar installation balance of system costs.
AK Stamping - Solar Bonding Jumpers
AK Stamping Company is a leading provider of cost-effective and functional solutions for integrated PV module bonding and grounding hardware. Our world-class production technologies offer simplified installation and high reliability, to reduce solar installation balance of system costs.
Telecom Hardware
AK Stamping - Model B1 - Bond Clamp
We have combined the specification requirements of the B1 Bond Clamp into a reduced, compact size. Our patented design and recommended installation practice allows for the clamp to absorb the impact of a current load. As with other reduced size clamps, arcing and clamps lifting off the cable at heavy current loads is eliminated. The Mini B provides a wide clamp inside the cable to protect the cable pairs.
AK Stamping - Gator Clamp
The Gator Clamp is designed to make an electrical bond to the metal shield of plastic sheath cables. Sheath tabbing on cables in excess of 1` OD. is not required. Simply insert the base plate, attach the ground strap, bar or bonding braid and tighten with a system approved wrench. As the clamp is tightened the teeth of the top and bottom plates insure a positive grip into the cable. Two kepnuis are provided to prevent the clamp from loosening after the initial installation.