Albright International products

The DC64P has been designed for direct current loads, such as motors used on small winches.  The DC64P is a monoblock construction, resulting in a compact design which is compatible with modern electronic control systems.  Devised for both interrupted and uninterrupted loads, this contactor is suitable for switching Resistive, Capacitive and Inductive loads. The DC64P has double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity.  The ‘P’ type configuration offers greater environmentally protected switches, compliant to IP66.  The DC64P has M6 main stud terminals and coil connections are by means of 6.3mm spades.

The Reduced Silver series are suitable for applications where infrequent switching is specified. In such applications the degradation of the tip is minimal and therefore a higher volume of silver is unnecessary. The RW150 is designed for use in telecommunications and power distribution applications where an uninterrupted current load is switched. These contactors are primarily for use with Direct Current loads but can also be used with Alternating Currents.

The HV500 is a Single Pole High Voltage Contactor which meets market requirements for innovation and cost efficiency with voltages up to 1000 Volts and full hermetic sealing allowing for durability in extreme environments, or where operating in potentially hazardous conditions. Applications include automotive (vehicle and charging), renewable energy and battery packs. The HV500 specification features a current thermal rating up to 500 amps, non-polarity sensitive main contacts, Coil Reverse Polarity protection, a variety of coil options including PWM and Magnetic Latching and coil suppression. The HV500 options include Auxiliary Switch (Normally Open, Normally Closed and Mirror), Patent Approved Adjustable Bracket and Silver Contacts.