AMB Technologies products

Conventional Solar LED Street Light; A typical solar Street light system consists of 5 major components: the solar panel, the battery, the light fixture, the controller and the pole. During the day the solar panel capturing sunlight then convert to electrical energy and stores it in the battery, put into use for the street light in the nights automatically, and cut off during the day time.

The basic form of a solar water heating system comprises storage tank, solar collectors and interconnecting pipe work. The solar collectors are usually mounted on roof of a building to capture solar radiation. Small tubes run through the solar collectors and carry fluid either water or heat transfer liquid with low boiling point. The fluid absorbs heat from the solar collectors and transfer heat to incoming water.

Solar fencing is a system consisting of solar photo voltaic module, battery, energizer and alarm unit. Solar Photovoltaic Modules converts Sun Light Energy into electricity and then stores it in a Battery. The electricity from the 12 V Battery fed to an electric fence energizer, which converts 12V DC energy into a high voltage pulse. The energizer provides regular pulses of electricity to fence line about once in every second, the pulse itself is only around 300 microseconds long. These high voltage pulses flow from the energizer to the fence wires. When an intruder or animal comes into contact with the fence, it becomes part of an electric circuit between the output terminals of energizer and thus they receive a short, sharp but safe shock. The shock is sufficiently memorable that the intruder or animal never forgets and would never try to enter the Premises again. The alarm unit is compatible with the energizer and is activated upon intrusion, tampering or cutting of fence wire.

A solar inverter converts the direct current (DC) output of a  (PV) solar panel into a utility alternating current (AC) that can be fed into a commercial electrical grid or used by a local, off-grid system. Solar power inverters have special functions adapted for use with photovoltaic arrays, including maximum power point tracking and anti-islanding protection.