Ankur Scientific Energy Technologies Pvt. Ltd. products

Ankur Scientific has a long experience in designing Boilers and getting the same manufactured to the best world standards.

Ankur Scientific now offers an innovative Gasification technology for converting Waste Tyres into a Combustible Gas which could be either used for Thermal / Process Heat Applications or for Power Generation with by product possibilities of Charcoal / Char and Metal wires.

Ankur Scientific now offers Gasification technology for converting papers and currency notes duly briquetted into a Combustible Gas which could be either used for Thermal / Process Heat Applications or for Power Generation. It is important to note that Heavy metals could be present in the dye/ink that are used in printing of currency notes. The volatile heavy metal chlorides that are formed during gasification process are removed by our gas condition system and the cold gas are free from them. Thus there is no chance of heavy metal pollution.

This Woody Biomass Gasifier can use different types of woody biomasses. The woody biomass to be used will need to be sized as per the specification of the specific rating of Gasifier model and the moisture content will need to be less than 20% in general. Wide ratings are available right from 10 kgs/hr to 2,000 kgs/hr system. For higher ratings, multiple systems are offered.

Fine Biomass Gasifier can use different types of fine biomass, pellets, threshed agri residues etc. The fine biomass to be used will need to be as per the defined specification with moisture content below 10% in general. Wide ratings are available right from 40 kgs/hr to 2,000 kgs/hr system. For higher ratings, multiple systems are offered.

This innovative technology results in simultaneous production of char / charcoal as well as a high quality Combustible gas that could be used for power generation or for a variety of thermal applications. 

Ankur Scientific offers a completely new process for gasifying coal. The systems offered use a Downdraft process instead of the conventional updraft process. The updraft process (as is used) is one where the coal is fed into the gasifier from the top and the gas is also taken out from top. This leads to the gas entraining a lot of tar along with it as the gas needs to pass through the Pyrolysis zone which is where the tars come out. In the downdraft process on the other hand, the coal is fed from the top while the gas generated is taken out from the bottom. This leads to the gas being almost tar free.