Applied Techno Products Pvt. Ltd. products

AC/DC Hipot Testers are designed to ensure safe operation of DUTs under various operating conditions and environment. They are widely used for Hipot Testing of Electrical components and Insulation materials of electrical systems, Cable breakdown testing, Surge arresters, Capacitor charging, and other laboratory applications etc.

0.1Hz 0.05Hz 0.02Hz Very Low Frequency Power Cable HV 80kV withstanding Hipot Test Machine. The product can realize the full automatic voltage step up, step down, measurement. The full electronic design ensures the small size and light weight. The big LCD screen ensures the clear and visual display, and can display the output wave form. The printer outputs test reports.

AC Output 60kV 3000kVA Hipot Test Machine for Electric Generator Puncture Test. As the resonant system is reactive power full compensated, the power of the equipment and power sourceis only less than 1/10 of measured equipment; with smaller volume and lighter weight compared with theequipment in same capacity. The device with large output capacity and small power supply capacity, low cost,easy to operate and safe.

According to statistics, the most common faults in the three-phase underground power cable occur such as "single-phase breakdown" (breakdown of one of the cores to the cable sheath). Breakdown of this type can be "creeping"(intermittent) (ie recovering insulation up to a certain voltage, which is lower than the operating voltage of the cable), and with the "insulation leakage" (insulation resistance decreases up to tenskilohms - hundreds ohms).

High-voltage oscillographic reflectometer "ISKRA-4" is designed for distance fault locations of communication and power supply cables.

AT CB-300 Circuit Breaker analyser can be used to test and measure the mechanical characteristic parameters of high voltage switch (such as vacuum, six fluoride, less oil). Some key of this offering are stable measurement data, simple operation, has strong anti- interference ability, can be in the 500KV level and below the power station to do experiments, wiring is convenient, and is the most convenient tool for high-voltage switch maintenance test.

Model # LCM III Leakage Current Monitor is a very useful system for on-line condition monitoring of Surge Arresters as per the recommendations of IEC 600995. Surge Arrester Test System. LCM III – A complete portable system for condition monitoring of Live Metal Oxide Surge Arrestors.  The system is suitable for measurement and analysis of Resistive Leakage Current of LAs in Live switchyard conditions without any need for shutdown. The system is based on the measurement of 3rd Harmonic Resistive Current with   compensation for harmonic in the system voltage.

In all H.T. Transformers and Circuit Breakers etc. transformer oil or other insulant is a very important ingredient. The liquid insulant used should have a very high dielectric strength. To test the dielectric strength of the insulant, a very high voltage is passed through it. The failure of the dielectric strength of insulant is shown by a spark across two electrodes. This Oil BDV Test Set is a complete apparatus to carry out this test and is manufactured in various voltage ranges and models, as per IS: 6792/1992 and IEC-156.