- Home
- Companies
- BaSyTec GmbH
- Products
BaSyTec GmbH products
Test Systems for F&E - Cells Tester
BaSyTec - Cell Test System
The CTS test systems are designed for single cell tests with voltages up to 6V and currents up to 5A (20A in parallel operation). The very compact design allows a standard table top system with 32 independent test channels. Each channel has an additional input for the cell temperature. The automatic dynamic range switching gives up to 200nA precision at low current.
BaSyTec - Extended Cell Test System
The test systems of the XCTS series are designed for single cells with a maximum voltage of 6 V and currents up to 40, 60 or 80A. The amplifiers use switched technology which results in low heat generation, compact design and high overall energy efficiency. In parallel mode (optional) up to 800A can be reached. The XCTS has automatic and dynamic current range switching.
Test Systems for F&E - Module Tester
BaSyTec - Test Systems for High Power
Test systems of the HPS-HR series are based on a highly modular amplifier design. Voltage and currents can be adapted to your requirements. Currents up to 600 A, voltages up to 70 V and a maximum power of 6 KW are possible for a single channel. Additionally the power and current can be increased by parallel connection of up to 4 Channels (Up to 2400 A). As an option there are up to three current ranges for one channel possible and an independent battery safety device (BSD) can be integrated in the test system. The HPS-HR with its linear output stage and analog voltage control could be configured for single cells or modules and is fgrequently used for safety tests. For standard applications the cheaper, smaller and more energy efficient MRS-HR series is usually the better choice.
BaSyTec - Module Test System
The MRS-HR module test system is designed for voltages of 70 V and fits the typical module size. Maximum currents are customized between 70 A and 540 A. The switched mode amplifier results in low heat generation and high energy efficiency. This also reduces the energy demand for cooling of the battery laboratory.
Test Systems for F&E - Pack Tester
BaSyTec - Battery Pack Tester
The RPS-HR Battery Pack tester is for voltages up to 1000 V and currents up to 1000 A and a maximum power of 500 kW. A Battery safety (BSD) is integrated in the system and many additional options are possible.
