Bornay products

Small wind turbines range manufactured by Bornay and produced 100% with renewable energy, covers a wide range of power between 1000 and 5000 W, with sufficient capacity to respond any type of energy demand. Bornay small wind turbine is manufactured following a strict quality control. The main differences of Bornay wind turbines are the reliability, robustness and durability, since they are designed and manufactured with all the know-how that brings an experience of more than 50 years in the sector.

Me Solar solar modules are a high efficiency monocrystalline solar panels that provides free energy for battery charge at 12 or 24 volts, in multiple applications such as in a camper van, boat, house or garnden, as well as off-grid applications.

Me Solar flexible solar modules, made with hight efficiency monocristaline cells, ideal for curved roofs and surfaces where bonding is preferable, like recreational vehicles or nautical applications.

Solar Panel Manufacturing ,Solar Project Investment and Solar System Integration.

Excellent technical advantages and system design scheme to achieve high reliability, power generation effective gain and EPC cost reduction. Products can match different installation conditions, taking into account high adaptability and high compatibility. With mature support and inverter scheme, customized design for industrial and commercial and centralized ground power stations.

Low cost PWM controller. Internal temperature sensor. Three stage battery charging (bulk, absorption, float). Protected against over current. Protected against short circuit. Protected against reverse polarity connection of the solar panels and/or battery. With low voltage load disconnect output. Optional remote display (20A model only).

PWM controller. Charges two separate batteries. E.g. the starter battery and the service battery of a boat or mobile home. Programmable charge current ratio (standard setting: equal current to both batteries). Charge voltage settings for three battery types (Gel, AGM and Flooded). Internal temperature sensor and optional remote temperature sensor. Protected against over current. Protected against short circuit. Protected against reverse polarity connection of the solar panels and/or battery.

Less maintenance and aging when the battery is not in use: the Storage Mode. The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 13,2 V/ to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.

A lead-acid battery that that has been insufficiently charged or has been left discharged during days or weeks will deteriorate due to sulfation. If caught in time, sulfation can sometimes be partially reversed by charging the battery with low current up to a higher voltage.

The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers.