17 products found
Callidus Technologies - part of UOP, a Honeywell Company Products
-
UOP Callidus Flares - General Market Flares
Through the decades Callidus Technologies has improved designs to increase the smokeless capacity of our flares.
-
UOP Callidus - Model PFA - Pipe Flares
High stability flame retention system allows the flare to bum during all types of weather conditions. The pipe flare is the most basic type of flare tip. It is sometimes called an “utility flare”. Pipe flares will not smoke when burning low carbon content gases. The UOP Callidus Pipe Flare (CAL-PF) incorporates key design features to help ensure a stable burning flare designed for long life and dependable service. Flares come with a high ...
-
UOP Callidus - Upper Steam Flares
Upper steam flare tips incorporate a high-stability pilot and a flame retention system. With a high efficiency, low noise steam injection ring, the flare tip provides smokeless burning with lower noise than traditional steam injection systems. The upper steam injection is mechanically superior in design while providing greater flow at lower steam ...
-
UOP Callidus - Inner Steam Flares
The internal steam flare and the internal steam super sonic flare represent significant improvements over traditional internal steam ...
-
UOP Callidus - Demountable Pipe Flare System
The Demountable flare system provides flexible flaring operations to so that you can place multiple risers on a single support structure. They also allow you to perform maintenance to the tip at grade with minimal use of personnel at elevation. The demountable flare system features a derrick with the riser or risers mounted in such a way to permit lowering the flare tip to grade for service without the use of a crane. The flare riser is typically ...
-
UOP Callidus - Totally Enclosed Ground Flare
UOP Callidus Totally Enclosed Ground Flare (TEGF) system was originally designed to eliminate light and noise from flaring waste gases. This flare has been used extensively in the combustion of waste gases from chemical plants, hydrocarbon loading terminals, FPSO floating production vessels, refineries, and any other application where low emission, efficient combustion is required every day. Totally Enclosed Ground Flare Units can be designed for ...
-
UOP Callidus - Multipoint Flares
Multipoint flares give you the benefit of unlimited smokeless capacity and the lowest possible radiation. Reduction in thermal radiation levels of 60% or greater are often achieved. Callidus’ Multipoint flares are in service both onshore and offshore, with smokeless capacities up to 3,500,000 ...
-
UOP Callidus Flares - Production Flares
Callidus Technologies has flaring solutions for oil and gas production in offshore or onshore environments. Our innovative flares can be used in the harshest offshore environments on platform and ship installations. Our production flares produce low heat radiation levels, smokeless burning at all flow rates and dramatic reductions in flare tip weight.
-
Callidus Hemisflare - Flare
The Callidus Hemisflare tip design is a breakthrough in modern flare technology. Through the use of computational fluid dynamics (CFD) modeling and physical testing, a new method of flare gas combustion has been created. We’ve incorporated a Coanda design with enhanced ridges that has increased the flare gas and air mixing while enabling longer tip ...
-
UOP Callidus - Air Assisted Flare
The air assisted flare represents an effective alternative to traditional, steam-assisted smokeless flares. Significant advantages of the air-assisted design is a dramatic reduction in maintenance of the flare tip and lower operating costs.The continual flow of forced draft air cools the tip and prevents flame pull down in high wind ...
-
Multipoint Production Flare Systems
This high duty and high smokeless capacity flare system features significantly higher surface to area relationship for waste gas exit compared to single tip designs. This design can facilitate mixing over the widest possible range of flow ...
-
UOP Callidus Flares - Specialty Flare Systems
UOP Callidus specialty flare systems have been developed to meet your ongoing production needs.
-
UOP Callidus - Rental Flare
Callidus Technologies maintains an inventory of rental flares, oxidizers, combustors, and other equipment to provide quick, safe combustion solutions when regular equipment requires maintenance, becomes inoperable or a temporary solution is needed. Callidus Technologies can provide a rental unit from existing inventory, design a unit or modify an existing unit in a short amount of ...
-
UOP Callidus - Flare Gas Recovery (FGR) Unit
UOP Callidus Flare Gas Recovery (FGR) technology offers you an easy way to address growing environmental, commercial and public relations concerns regarding flaring and flare emissions. FGR technology gives your facility the ability to “recycle” flare gas. The system provides a direct reduction in emissions. In addition to environmental and community relations value, these units can also reduce cost requirements for purchased gas and reduce ...
-
Callidus Burners
Callidus process burners are designed to meet NOx reduction requirements in refinery or petrochemical fired heater applications. Optimize your burner for more efficient use with our Next-Gen Ultra-Low NOx CUBL burners, Ultra-Low NOx line, Low-NOx line, Premix or Conventional Callidus raw Gas (CRG) burners.
-
Callidus - Ultra-Blue (CUBL) Burners
The advanced Callidus Ultra-Blue (CUBL) series of burners are specifically designed for each customer’s individual application and ensure maximum operational performance with minimum environmental impact, providing real value to refining and petrochemical ...
-
UOP Callidus - Staged Gas Low (CSGL) NOx Burner
UOP Callidus Staged Gas Low (CSGL) NOx Burner is a staged gas burner that uses an improved refractory flame holder design for greater stability and lower NOx emissions. Our engineers designed the CSGL burner to improve low NOx performance in a low maintenance, cost competitive piece of equipment. The CSGL burner utilizes Next Generation CUBL technology, which combines the conventional bluff body eddy zone with stabilization channels, notches, ledges and ...
-
Callidus - Low NOx Burners
Our Low NOx Burners incorporate a mechanism for reducing the peak flame temperature relative to premix and conventional burners. This reduction in peak flame temperature results in lower NOx emissions. Peak flame temperature is most commonly reduced by separating combustion into multiple zones, referred to as “stages.” A gas-firing low NOx burner typically has Primary and Secondary combustion zones. A combination gas/oil firing burner ...
-
Specialty Burners
Among the many various process heater types and configurations, there are a few which are so unique in design and required performance that a very specialized burner is required. One of our areas of expertise at Callidus is the development of high-quality burners for these unique ...
-
Callidus - Premix Burner
In a Premix burner, the fuel and air needed for combustion are drawn together and mixed prior to discharge from the burner ...
-
Conventional (CRG) Burner
In a Conventional burner, the fuel and air needed for combustion are mixed in the throat of the burner where ignition and oxidation reaction occurs. There is a single flame zone. In contrast, Low NOx burners typically use multiple flame ...