12 products found
products
-
UPS Systems - E Series UPS Systems
-
DALE - Model E201+ 1kVA - Single Phase Tower UPS
Selectable ECO mode for high efficiency operation. Automatic battery charge in UPS off mode. Lightening and surge protection. Short circuit and overload protection. Automatic fan speed control with load variation. Emergency Power Off facility. Smart RS232 comms with monitoring software. USB communications port included. Optional relay or SNMP communications card. Matching EE battery packs available. Programmable load shedding in battery mode. High ...
-
UPS Systems - AC UPS Systems
-
DALE - AC Frequency Converters - Single & Three Phase
Our range of standard Frequency Converters provide a high quality frequency conversion based on UPS system technology which can be configured with adjustable output frequency or voltage. The frequency converter system can be customised to meet the most demanding of client ...
-
UPS Systems - DC UPS Systems
-
DALE - Model SR Series - DC UPS/Battery Charger | Modular
The SR range of single phase or three phase input switch mode based DC systems offers a more compact and modular solution which can be configured to provide DC output voltages from 24V to 240V nominal with output power capability to 150kW. An inherent benefit of modular systems is expandability and the potential for rectifier ...
Products by Gustav Klein GmbH & Co. KG
-
Testing and Simulating
-
GK - Model TYP I-TS-3870 & MI-TS-3871 - Battery Pack / Fuel Cell / e-Powertrain
TYP I-TS-3870 & MI-TS-3871: I-TS-3870: Single-channel system for testing and simulation of batteries, fuel cells and powertrains. One output with up to 1000 V or 1000 A. Maximum power in single operation 650 kW, up to 1.3 MW in parallel operation. MI-TS-3871: Multi-channel system for energy-saving tests and simulations. Two or four outputs, up to 1000 V and 1000 A per output (without galvanic isolation between the DC ...
-
GK - AC Source/Sink - Mains Simulation / Bidirectional
AC source/sink (option). Type TS-AC-5445(1~) / RTS-AC-5445(1~). Type TS-AC-5446(3~) / RTS-AC-5446(3~). Adjustable AC source/sink. Rated power up to 200kVA 1~, up to 500kVA 3~. Frequencies from 16.7 to 800 Hz. Version: The static AC source contains tried and tested components of our UPS technology. Available with adjustable output frequency and / or output voltage. Clear design, tried and tested components and easy maintenance are the distinguishing ...
-
Stationary Industrial and Railway Power Supply
Gustav Klein has been supplying safe power supplies for industry and railroads for decades, such as rectifiers, inverters, DC converters, UPS and BSV systems, as well as frequency converters with fixed output frequency.
-
GK - Model Type UPS-7011 (1~) - Type USV-7013 (3~) - Industry UPS Systems
Rated power up to 200 kVA 1~ up to 500 kVA 3~. Scope of application. Our static uninterruptible power supply (UPS) systems comply with the VFI-SS-11 classification according to IEC 62040-3. With their robust industrial design, they support a secure consumer supply in continuous operation. In times of energy transition, our UPS systems protect against system failures caused by interruptions and disturbances in the grid feed. Customers from the telecom, ...
-
GK - Static Inverters
Type WR-5080 (1~), rated power up to 200 kVA. Type WR-5081 (3~), rated power up to 500 kVA. Type WR-5073 (inverter plug-in modules). Scope of application: Our static inverters are designed as uninterruptible power supplies (inverters in combination with rectifiers and batteries) to bridge short-term interruptions, mains failures, voltage fluctuations, frequency fluctuations or generally to compensate for mains disturbances in the field of data processing ...
-
GK - Primary Clocked DC Converter Modules
Primary clocked DC converter modules are used, among other things, to generate different (consumer) voltage levels from central DC voltages, also battery-supported. Scope of application: Primary clocked DC converter modules are used, among other things, to generate different (consumer) voltage levels from central DC voltages, also battery-supported. Our clocked DC converter modules for use in the low-voltage range can be connected in parallel in any ...
-
GK - Model BSV - Power Supply for Operating Theatres System
Emergency power supplies for operating theatres according to VDE 0558-507 and VDE 0100-710 or ÖVE / ÖNORM E 8007 for continuous or standby parallel operation. Scope of application: In the medical field, electrical devices are used on which people’s lives or the healing process depend significantly. Accordingly, the highest demands are placed on the equipment needed in the operating theatre or intensive care unit. Gustav Klein BSV systems ...
-
Stationary Industrial and Railway Power Supply - Rectifiers
The rectifier units are manufactured under three main groups depending on the power and application. We offer the solution for your requirements. The rectifier units are manufactured under three main groups depending on the power and application: Thyristor rectifier type GR-3811 and GR-3812. IGBT rectifier with pulse width modulation type GR-3864. Rectifier module type GR-5713 (1~) and GR-5701 (3~).
-
GK - Thyristor Rectifiers
GR-3811 with touch screen TFT display. GR-3812 with LC-Display. Equipment: Thyristor rectifier 6-pulse (12-pulse optional). Input contactor for rectifier. Automatic charge. Analogue control. Microprocessor-controlled monitoring. Digital display with event ring memory (non-volatile): GR-3811: colour TFT panel with touch screen, GR-3812: LC display with LED indicators in mimic diagram. Power unit with two-stage temperature monitoring (Warning message / ...
-
GK - Model IGBT - Type GR-3864 - Rectifier Unit
Bidirectional rectifier with TFT display. With our IGBT rectifiers, modern power supply solutions are realised taking into account low THDi values and energy efficiency (low apparent power consumption, ...
-
GK - Model Type GR-5713 (1~) and GR-5701 (3~) - Rectifier Module
The modules can be used with or without an external buffer battery. Scope of application. Our rectifier modules are used in system cabinets. They are usually used as power supply units for industrial applications or as rectifiers with buffer batteries. The rectifier modules can be extended with further module solutions to individual and customised power supplies (e.g. several voltage levels by means of DC converters, AC supply by means of inverters). The ...