Dexsil Corporation products

HYDROCLOR-Q is a quantitative field test kit to measure organic chlorine contamination in oil/water mixtures and used antifreeze. The test takes less than 10 minutes to run and quantifies total organic chlorine in the range of 200 to 4000 ppm. It can be used on water-soluble cutting fluids, sump and bilge water, antifreeze or any fluid that contains greater than 70 % water.

Oxidation of oil, such as lubricating, hydraulic, pump and other oils, is one main cause of mechanical malfunction. These oils can be analyzed for total acid number quickly and easily by incorporating Titra-Lube TAN test kits in your preventive maintenance schedule. Accurate monitoring of fluids for increased acid number can reduce costly repair or replacement of equipment.

Moisture in oil is an important parameter that must be addressed when considering contaminates in lubricating and hydraulic oils. Analyses performed in the laboratory are time consuming and costly. Turnaround time for most water analyses is 1 to 2 weeks. HydroSCOUT is an on-site test that quantifies water in industrial oils quickly and easily. The HydroSCOUT method incorporates the standard reaction of water with calcium hydride to produce one mole of hydrogen for every mole of water. By inserting the reaction tube into the hand-held meter, the instrument converts the pressure of the hydrogen into the amount of water in the sample. The results are reported in ug/mL. To convert to parts per million, simply divide your results by the specific gravity of the oil sample.