EL-Cell GmbH products

Test Cells - Standard Test Cells

EL-CELL - The Ideal 3-Electrode Test Cell For High-Throughput Battery Testing.

The PAT-Cell is a test cell for 2- and 3-electrode measurements on battery materials. It uses the modular PAT-Core concept and can therefore be used for a variety of test purposes. The cell has no wiring but is inserted directly into a PAT battery tester or connected to any commercially available battery tester/potentiostat via a PAT docking station. The easy handling is further improved by features such as the integrated PAT-Button. This electronic memory in the cell bottom enables automatic cell recognition when the cell is inserted into a PAT battery tester. The PAT-Cell is equally suitable for automated high-throughput scenarios and small-scale test series.

PAT Docking Stations

EL-Cell - The Ideal Docking Station For Individual Battery Testing

The PAT-Stand-1 is a docking station, which runs a single PAT-Cell or PAT-Cell-Press. It can be connected directly to a common multi-channel potentiostat (like the Biologic MPG-2 or VMP300) or battery tester (like the Maccor 4000) using 4mm banana sockets or a hardwired Sub-D socket. Therefore, the PAT-Stand-1 saves wiring effort, because it is not necessary to renew the connection of cell and potentiostat for every battery test. The PAT-Stand-1 fits nicely into a usual climate chamber (for example Binder KB53), which saves space in the lab. Furthermore it is small enough to be placed inside a glovebox and allows immediate functional testing of the PAT-Cell. It is even possible to perform whole battery tests inside the glovebox. If you want to perform individual battery tests before switching to the larger PAT-Stand-16 system, then the PAT-Stand-1 is the ideal entry docking station for you.

Potentiostats / Galvanostats / EIS

EL-CELL - Multi-Channel Battery Tester

The PAT-Tester-i-16 is a state-of-the-art multi-channel battery tester specially developed for the requirements of battery material research. It features an integrated Temperature Chamber with a temperature range of 10 to 80°C, independent test channels with a fully featured potentiostat/galvanostat and impedance analyzer, and a cableless connection for battery test cells. The device provides accurate measurements with an excellent signal-to-noise ratio and comes with a Switch Matrix for software-controlled switching between half-cell and full-cell measurements. It is highly scalable, requires no fixed installation, and can be fully controlled remotely via LAN.