Elektro-Bauelemente Electro GmbH (EBG) products

Ensuring low-voltage power supply to the private consumer, in public places, event sites or within commercial and industrial outdoor sites.

Low-voltage switchgear typically performs tasks such as opening and closing circuits and carrying the current. In the main circuit, switchgear is responsible for the protection and monitoring of equipment and consumers. During maintenance work, they enable safe disconnection of parts of the plant or the entire plant.

Wall-mounted or free-standing for 1,000 kW transformer/local network stations for direct voltage measurement and indirect current measurement via current transformers.

Increasingly decentralized energy generation, such as from biomass, wind energy or photovoltaic plants, can lead to a change in the horizontal load flow up to a load flow reversal at the low-voltage level if consumption on site is low and feed-in power is high. This can cause voltage increases in the distribution network. In addition, the uncontrolled charging of an ever-increasing number of electric vehicles leads to additional load peaks. Exceeding the tolerated range must be prevented by the grid operator. This is achieved by intelligent power grids. A central control system optimally coordinates them with each other and thus balances out power fluctuations – especially those caused by fluctuating renewable energies – within the grid.

Underfloor connection systems: Power supply systems installed below ground which can be walked on and partially driven over.

Our cable connection and transition boxes, for example, are suitable for standard light poles from 3.0 m light point height.