ENERCON GmbH products

Rated power: 2,300 kW, Rotor diameter: 71 m, Hub height: 57 m / 64 m / 74 m / 85 m / 98 m / 113 m, Wind zone (DiBt): WZ III, Wind class (IEC): IEC/NVN IA und IEC/NVN IIA, Turbine concept: Gearless, variable speed, single blade adjustment.

Rated power: 2,000 kW, Rotor diameter: 82 m, Hub height: 78 m / 85 m / 98 m / 108 m / 138 m, Wind zone (DiBt): WZ III, Wind class (IEC): IEC/NVN IIA, Turbine concept: Gearless, variable speed, single blade adjustment.

With the LP4 platform Lagerwey introduces the ultimate onshore wind turbine generation. The LP4 platform is based on the successful LP2 platform with DDPM technology and advanced tower designs. The LP4 generation turbines are designed for various wind classes and can be built with the Lagerwey Climbing Crane. This makes Lagerwey wind turbines cost-efficient throughout the entire life cycle.

With the LP4 platform Lagerwey introduces the ultimate onshore wind turbine generation. The LP4 platform is based on the successful LP2 platform with DDPM technology and advanced tower designs. The LP4 generation turbines are designed for various wind classes and can be built with the Lagerwey Climbing Crane. This makes Lagerwey wind turbines cost-efficient throughout the entire life cycle.

With the LP4 platform Lagerwey introduces the ultimate onshore wind turbine generation. The LP4 platform is based on the successful LP2 platform with DDPM technology and advanced tower designs. The LP4 generation turbines are designed for various wind classes and can be built with the Lagerwey Climbing Crane. This makes Lagerwey wind turbines cost-efficient throughout the entire life cycle.

The L100 is a 2.5 MW wind turbine designed for IEC class IIIa locations. The smart and slim design, particularly in combination with our Modular Steel Mast (MST), make this turbine highly profitable. The modular structure of this tower is able to reach a 135 metre shaft height, which significantly improves the wind conditions, resulting in better yields. In addition, the L100-2.5MW is highly suitable for placement on difficult to reach locations with limited space on site. Due to Lagerwey`s experience and expertise, single blade lifting is also not a problem.

The share of wind energy in the electricity generation is on the rise in many countries. That is why the technical requirements of local grid operators regarding the electrical performance of wind energy converters (WECs) and wind farms (WFs) are also getting more extensive and challenging.

Extreme climate conditions require flexibility and specialised technological solutions. By the use of modified components. ENERCON is ensuring development at hot and cold climate sites without WEC operation being limited by the prevailing climate conditions. ENERCON wind energy converters have other additional features in order to enable WEC operation even in the most challenging of weather conditions.

ENERCON wind energy converters run with a special storm control feature. This slows the wind turbine down so that it can continue to operate even at high wind speeds. Numerous shutdowns which lead to considerable losses in power output can thus be avoided. When storm control is activated, the rated speed is linearly reduced starting at a predetermined wind speed for each turbine type. Beginning at another turbine-specific wind speed, the limitation of the turbine`s rated speed also reduces active power. The turbine only shuts down at a wind speed of more than 34 m/s (10-minute average). In comparison: When storm control is deactivated, the wind turbine stops if the wind speed reaches 25 m/s in the three minute average or 30 m/s in the 15 second average.

We provide aviation obstruction lights on the nacelle and/or the tower following the regulations of the local aviation authority. Our aviation lights are visible 360 degrees around the turbine and can vary in intensity and colour. We also offer GPS synchronisation, UPS (battery backup) and other solutions when required.