Eurocardan S.p.A products

The BD friction disc torque limiter is a conical Belleville spring clutch used to limit the torque value transmitted at the calibration value (750-1600 Nm) through slippage of the friction discs, however maintaining transmission of power. The conical Belleville springs allow the clutch to preserve its calibration features over time, not being affected by the wear of the discs. The closed and linear design is aimed at eliminating handles, projections and cavities, thus increasing the safety features. The clutch uses 2 or 4 discs (BD2: 2 friction discs; BD4: 4 friction discs) in special material (asbestos-free). The value of the calibration torque is pre-set in the factory and can be modified by the user via replacement of the spring assembly. Such a system precludes the possibility of tampering with the calibration of the clutch during use, ensuring the protection of transmission.

The FT-A and FT-F torque limiters are friction plate clutches which intervene without interrupting power transmission. They work in both directions of rotation and the Belleville conical springs limit the value of the torque transmitted to the calibration value through slipping of the friction discs (in quantities of 2 or 4, in special material). The Belleville conical springs guarantee the maintaining of clutch calibration over time as they are not affected by disc wear. For the FT-A, the calibration torque value can be adjusted by changing the compression height of the conical spring. The value of the calibration torque of the FT-F is instead pre-set in the factory, precluding the possibility of tampering with the clutch calibration during use and thus safeguarding protection of the transmission of the machine on which it is applied.

The AW series (with triangular profile telescopic tubes) is the response to the maximisation requirements of work angles, being characterised by the presence of constant-velocity joints on both sides.

The BD friction disc torque limiter is a conical Belleville spring clutch used to limit the torque value transmitted at the calibration value (750-1600 Nm) through slippage of the friction discs, however maintaining transmission of power. The conical Belleville springs allow the clutch to preserve its calibration features over time, not being affected by the wear of the discs. The closed and linear design is aimed at eliminating handles, projections and cavities, thus increasing the safety features. The clutch uses 2 or 4 discs (BD2: 2 friction discs; BD4: 4 friction discs) in special material (asbestos-free). The value of the calibration torque is pre-set in the factory and can be modified by the user via replacement of the spring assembly. Such a system precludes the possibility of tampering with the calibration of the clutch during use, ensuring the protection of transmission.

The FT-A and FT-F torque limiters are friction plate clutches which intervene without interrupting power transmission. They work in both directions of rotation and the Belleville conical springs limit the value of the torque transmitted to the calibration value through slipping of the friction discs (in quantities of 2 or 4, in special material). The Belleville conical springs guarantee the maintaining of clutch calibration over time as they are not affected by disc wear. For the FT-A, the calibration torque value can be adjusted by changing the compression height of the conical spring. The value of the calibration torque of the FT-F is instead pre-set in the factory, precluding the possibility of tampering with the clutch calibration during use and thus safeguarding protection of the transmission of the machine on which it is applied.