Flex Power Modules, a division of Flex products

The BMR351 is a non-isolated digital Intermediate Bus Converter (IBC) with PMBus^® interface. The device delivers up to 1600 W of continuous power at efficiency levels of up to 97.8% (measured at half load) in an industry standard quarter brick measuring 58.4 x 36.8 x 14 mm using an integrated "open deck" baseplate or 14.7mm using a flat baseplate which enables simplified conduction cooling to the customers` heatsink or cold plate. Peak power delivery of up to 2320 W (200 A) is available for <0.5s.

1300-2450 W quarter brick digital isolated DC/DC converter for datacom applications. The BMR491 is the sixth generation of our digitally controlled Advanced Bus Converter packaged in a quarter-brick format. There are three versions, with input voltage ranges of 40 to 60V and 48 to 60 V, which meet the typical voltage requirements used in a data center environment. Each device delivers a nominal output voltage of 12 V.

BMR482 is the second generation of Direct Conversion power modules converting directly from 48 V to silicon core voltages as low as 0.5 V_DC. It consists of one "Main" unit and up to 5 "Satellite" units which can be deployed in parallel achieving a total output current of 660 A (110 A per module).

Our range of Power Interface Modules (PIM) simplify the design of blade servers based on Advanced TCA (ATCA) standards, as well as other applications where power conditioning is required prior to the Isolated DC/DC Intermediate Bus Converter.