8 products found
Fluxtrol Inc. Products
-
SMC Materials
Fluxtrol, Inc. is the world leader in in magnetic flux control in induction heating systems and other applications. Fluxtrol does research, develops and manufactures magnetic flux controllers using proprietary soft magnetic composites (aka MagnetoDielectric Materials) produced in both machinable and moldable (formable) varieties. The properties and characteristics of these materials allow using them effectively in a wide range of applications with frequencies from 50 Hz up to 13.56 MHz. Fluxtrol, Inc. welcomes collaboration with customers or research groups for the advancement of new ideas and special applications.
-
Fluxtrol - Model 100 - Magnetic Materials
Fluxtrol 100 has the highest thermal conductivity, saturation flux density and flexural strength of the Fluxtrol family of materials. Fluxtrol 100 has similar magnetic properties in the favorable direction to Fluxtrol A, but with significantly less anisotrophy both thermally and magnetically. Fluxtrol 100 has good machinability when sharp tools and high spindle speeds are ...
-
Fluxtrol - Model A - Outside Diameter Cylindrical Coil
Highest maximum magnetic permeability and the lowest magnetic losses at low to intermediate frequencies in the Fluxtrol family of soft magnetic composites in the favorable magnetic direction. Fluxtrol A also has good mechanical strength, thermal conductivity, and is readily machinable. However, it does have high magnetic and thermal anisotropy, which should be taken into account when using the ...
-
Fluxtrol - Model 50 - Outside Diameter Cylindrical Coil
Excellent performance over a wide range of frequencies. Material has good mechanical strength, machinability and thermal conductivity. Note:There are many variables involved in an induction process. In order to utilize the fullest potential of our product, you must help narrow down the parameters you are operating with. Each grade of Fluxtrol material has its own distinctive properties that are beneficial to a certain range of electrical and design ...
-
Fluxtrol - Model 25 - Outside Diameter Cylindrical Coil
Good performance over a wide range of frequencies. Material has the best elasticity of Fluxtrol materials, excellent machinability and reasonable thermal ...
-
Ferrotron - Model 559H - Outside Diameter Cylindrical Coil
Proven flux concentrator performance with the highest dielectric strength in the Fluxtrol family of machinable soft magnetic materials and lowest losses at high frequencies. Almost constant magnetic permeability over a range of magnetic flux densities and frequencies. Material has good mechanical strength and thermal conductivity. Regarded by many to have the best machinability of the Fluxtrol family of ...
-
Fluxtrol - Model 559H Original - Outside Diameter Cylindrical Coil
Similar to Ferrotron 559H standard, Original has nearly constant permeability over a wide range of flux densities and excellent machinability. When compared to Ferrotron 559H, Original has better mechanical strength, higher magnetic permeability, saturation flux density and thermal conductivity. These improvements do come at a cost of dielectric strength and magnetic ...
-
Alphaform - Model LF - Soft Magnetic Composite Coil
Formable soft magnetic composite developed on the basis of magnetic particles with a thermal-curing epoxy binder. This material may be used for quick and efficient installation to induction coils with low ...
-
Alphaform - Model MF - Soft Magnetic Composite Coil
Formable soft magnetic composite developed on the basis of magnetic particles with a thermal-curing epoxy binder. This material may be used for quick and efficient installation to induction coils with low ...