Gsolar Power Co., Ltd. products

It is used for measuring crystalline module with the size up to 2000mm x 1100mm in face down position, able as manual standalone system as also as inline system. In the end-of-line testing it gets the proof of quality for the manufacturer and customer, Suitable for testing crystalline module, especially the modules using high luminousness EVA.

The solar cell tester uses different LEDS whose colors are chosen to match the spectrum and intensity of visible sunlight. The flasher is able to do freely defined light pulses ranging from 10ms to 200ms based on the solar cells. Machine performance is fourth better than the IEC 60904 class AAA class. The flash curve contains Suns-Voc evaluation, IV testing, reverse current testing and spectrum response testing. Suitable for testing all kinds of solar cells, such as crystalline silicon solar cells, thin film solar cells, HIT solar cells and all the other high efficiency solar cells.

It is used for detecting the inner defects of solar modules, such as low efficiency solar cell, broken finger, contamination, micro-crack, short edge, wafer issue, and so on. Used as manual standalone system as also as inline system.

A+A+A+ solar simulator, the performance is twice better than the international standard (IEC60904-9). Spectrum range: 300nm-400nm.

The machine is a very simple but also unique mechanical design of integrating electroluminescence detector into solar simulator, In the end-of-line testing it gets the proof of quality for the manufacturer and customer, Within one test, both IV curve and EL image could be acquired. Measurement results can be written to a database, Suitable for testing crystalline module, especially the modules using high luminousness EVA.

It is widely used by more than 600 solar module manufactures, lab, and universities in the world.

It is highly integrated, operation and daily maintenance is easy. Besides, the testing speed is very fast 720pcs/h.

It is used for detecting the inner defects of solar modules, such as low efficiency solar cell, broken finger, contamination, micro-crack, short edge, wafer issue, and so on. Used as manual standalone system as also as inline system.

Model: GPL-C2. Visual range: 160x160mm. Pixel resolution: 4928×3264. Exposure time: 1-25s. Special function: Forward/Reverse bias, IR image. Ambiance (humidity and temperature): Tem 20°C-30°C Hum 40%-70%. Configuration: Detector(including camera)+ PC + software. Max. input voltage/current: Max 10A,60V. Power supply: 220V,10A, single phase. Dimensions（LxWxH）: 650x750x1150mm.

Without dark room, testing speed is twice better than the common equipment!