Haining Xianke New Material Technology Co.,Ltd products

the pressure tank can keep the water hot during the night. the tank and work station can be put in the basement or house, and the solar collector is installed on the roof. It is perfect combination for the apartment or villa. as the tank is in the house, you can set the temperature, water level and other parameters by yourself, so it is very convenient. there is electric heater to support, and it could start automatically if no sunshine.

Safe and steady: Flat plate solar collector uses all cooper fluid tube, and the components are not easy to be damaged, so the system operating is steady. Pressurized operating: Working pressure is 0.6Mpa and test pressure is 1.0Mpa. The hot water is forced to stream out from the top and convenient to use. High heat efficiency: Absorbing coating of the collector is black chrome and blue sputtering. The absorbing rate is 92-96%. and emission rate is 5%±2%, so heat efficiency is high. Good temperature preservation: The illustration layer is 50mm with constant temperature and high pressure quantitative foam, and it is less than 5 Celsius Degree per 24. Long using life: Inner tank is 1.2-2.0mm stainless steel that resists high temperature and corrosion, and keep 15 years using life.

Safe and steady: Flat plate solar collector uses all cooper fluid tube, and the components are not easy to be damaged, so the system operating is steady. Pressurized operating: Working pressure is 0.6Mpa and test pressure is LOMpa. The hot water is forced to stream out from the top and convenient to use. High heat efficiency: Absorbing coating of the collector is black chrome and blue sputtering. The absorbing rate is 92-96%, and emission rate is 5%±2%, so heat efficiency IS high. Good temperature preservation: The illustration layer is 50mm with constant temperature and high pressure quantitative foam. and it is less than 5 Celsius Degree per 24. Long using life: Inner tank IS 1.2-2.0mm stain less steel that resists high temperature and corrosion. and keep 15 years using life.

there is no water in the vacuum tube, the system can work as usual if one tube is broken. operation pressure is 0.7Mpa, and the test pressure is 1.0Mpa. it is used with existed tank in the basement. the frame can be installed on the flat roof or inclined roof.

there is water inside of the vacuum tube and it is suitable for middle and low 1 attitude area. it is widely used in the hot water supply of large building such as hotel, school, or swimming pool. high heat transfer rate over 95%. it is combined with big storage tank.