9 products found
InnoLas Systems GmbH Products
-
Dimenso - Laser Processing System
The DIMENSO is a laser processing system designed for high-precision and high speed applications in the photovoltaic and glass industry. The gantry system is designed for selective ablation of thin film layers on big size glass, with the ability to remove layers from the top or through the glass from the bottom side. The system is available with mechanical scribe heads (from top) or with multiple laser beam heads (from top or bottom). System speed is up ...
-
Dividos - Circuit Board Systems
The DIVIDOS with superior ablating technology, set’s the new standard for depaneling of printed circuit board ...
-
Expego - Split Axis Laser Processing Workstation Machine
The EXPEGO is a laser processing workstation designed for high-precision applications in the electronic, precision engineering, and photovoltaic industries. It is mainly used for microvia drilling, cutting (routing), structuring and cavity formation in PCBs with typical dimensions as 610 x 460 mm and 635 x 540 ...
-
Linexo - Linear Table Machine for Various Applications
The LINEXO is a versatile laser processing workstation designed for high-precision applications in the electronic, precision engineering, and photovoltaic industries. It is often used in R&D environments, as well as production of smaller substrates as e.g. ceramic ...
-
Lumion - Laser Machine for CSI-Solar Cell Processing
The next generation laser processing system for cSi solar cells. The LUMION is a state of the art laser system for cSi solar cell processing. It achieves a throughput of up to 7.500 wafers/ hour and is used in 24/ 7 high-volume production. The LUMION is available for for various applicatons such as Laser Doped Selective Emitter (LDSE), Passivated Emitter Rear Contact cells (PERC) and laser direct cleaving- cell cutting (LDC) . The system can be ...
-
Ultago - Turntable Machine for Various Applications
The ULTAGO is a powerful laser processing workstation designed for high-precision applications in the photovoltaic, precision engineering, and electronic industries. It achieves maximum throughput for solar cells or ceramic substrates and is used in high-volume production environments. Different from linear table machines, in the turntable machine loading, unloading, alignment, as well as laser processing are carried out in parallel in order to reach ...
-
Ultago - Model NX - Turntable Machine
The ULTAGO is a powerful laser processing workstation designed for high-precision applications in the photovoltaic industry. It achieves throughput of 6000 wafers per hour for solar cells and is used in high-volume production environments. Different from linear table machines, in the turntable machine loading, unloading, alignment, as well as laser processing are carried out in parallel in order to reach optimum ...
-
InnoLas - Model C-SI - Solar Cells
The awarded high speed dash pattern process of InnoLas achieves a similar opening ratio as a dot pattern. The losses in Voc and FF caused by dots, which are not contacted properly, are avoided due to the size of the dashes. An optimized dash pattern can achieve highest cell ...
-
InnoLas - Laser Doped Selective Emitters (LDSE)
Laser doped selective emitters (LDSE) reduce the contact resistance through selective overdoping of the contact areas. The InnoLas process solution achieves highest alignment accuracies down to 10 µm, an extremely homogenous energy ditribution through mask imaging with beam sizes from 100 - 300 ...