ITO Navaids products

The AL 175 is suitable for lighting objects that cannot be easily located. Coming in two versions (10-30Vdc & 230Vac) and comprising high intensity LEDs, it is powered by an automatic regulating current source with reverse polarity protection. The LEDs and electronics are moulded in an epoxy compound. The light output can be factory set. Low power consumption means the floodlight is suitable for solar powered systems. No lamp changes are required. Maintenance costs are a fraction compared to lamp based floodlights.

The AL 350 is suitable for lighting objects that cannot be easily located. Coming in two versions (100 or 30 degrees beam angle) and comprising high intensity LEDs, it is powered by an automatic regulating current source with reverse polarity protection. The LEDs and electronics are moulded in an epoxy compound. The light output can be factory set. The floodlight can be supplied with an integrated daylight sensor: turning the light on at dusk and off at dawn. Low power consumption means the floodlight is suitable for solar powered systems. No lamp changes are required. Maintenance costs are a fraction compared to lamp based floodlights.

The SPB 3 is both versatile and cost-effective. This 1-3 mile LED beacon is compact, self-contained and available in red, green, amber and white. The light source is formed from one high intensity LED. The user-adjustable IALA flash characters and light output can be set according to visibility 1, 2 or 3 mile by means of a infra red remote control to change simple and fast a flash character or light output. The internally placed AGM battery is user-replaceable. The SPB3 is sealed and completely waterproof (IP68).

The SPB 40 is both versatile and cost-effective. This three-mile LED beacon is compact, self- contained and available in red, green, amber and white. The light source is formed from high intensity LEDs. Output can be set according to visibility. The beacon can be synchronised via the ITO sync GPS receiver and is designed to operate without servicing/maintenance for up to five years. Charge characteristics in dark conditions are superb. Due to its compactness, the beacon is especially suited for regions with low sun irradiation. Compared to conventional lanterns, this beacon has large vertical divergence, good emitted light intensity, LED long life expectancy and high reliability.

A membrane is incorporated into the base for air pressure equalisation and to prevent moisture from entering the casing. Compared to conventional aeronautical obstruction lights, this lantern has lower maintenance costs, low power consumption which makes it very suitable for solar powered systems, LED long life expectancy and is highly reliable. The IOL 150 complies with the following standards: ICAO annex 14, volume I, chapter 6, type A/B Low Intensity Obstruction light, FAA L810 regulations.

The IHP 150 LED light is suitable for helidecks and has a membrane incorporated into the base for air pressure equalisation and to prevent moisture from entering the casing.

The SPB 70 is both versatile and cost-effective. This five-mile LED beacon is compact, self-contained and available in red, green, amber and white. The light source is formed from high intensity LEDs. Output can be set according to visibility. The beacon can be synchronised via the ITO sync GPS receiver and is designed to operate without servicing/maintenance for up to five years. Charge characteristics in dark conditions are superb. Due to its compactness, the beacon is especially suited for regions with low sun irradiation. Compared to conventional lanterns, this beacon has large vertical divergence, good emitted light intensity, LED long life expectancy and high reliability.

The SPB 300 3 NM is both versatile and cost-effective. This three-mile LED beacon is compact, self-contained and available in red, green, amber, white and black. The light source is formed from high intensity LEDs. Light output can be set according to visibility. The beacon can be synchronised via the ITO sync GPS receiver and is designed to operate without servicing/maintenance for up to five years. Charge characteristics in dark conditions are superb. Due to its compactness, the beacon is especially suited for regions with low sun irradiation.

The SPB 300 3 NM is both versatile and cost-effective. This three-mile LED beacon is compact, self-contained and available in red, green, amber, white and black. The light source is formed from high intensity LEDs. Light output can be set according to visibility. The beacon can be synchronised via the ITO sync GPS receiver and is designed to operate without servicing/maintenance for up to five years. Charge characteristics in dark conditions are superb. Due to its compactness, the beacon is especially suited for regions with low sun irradiation.

The AL 650 is suitable for lighting objects that cannot be easily located, such as offshore wind farms. The light source comes in two versions (100 or 30 degrees beam angle). The LEDs are powered by an automatic regulating current source with reverse polarity protection. LEDs and electronics are moulded in an epoxy compound. Light output can be factory set. The floodlight can be supplied with integrated daylight sensor: turning on the light at dusk and off at dawn. Low power consumption means the floodlight is suitable for solar powered systems. No lamp changes are required. Maintenance costs are a fraction compared to lamp based floodlights.