3 products found

Lianyungang Sunrain Co.,Ltd. products

solar collector with heat pipe

Heat Pipe Solar Collector Descriptions of Heat Pipe Solar Collector 1. Evacuated tube collector, a part of solar hot water heater, is usually mounted on a roof and has a row of glass tubes. 2. A copper heat pipe, which is hollow with the space inside evacuated, is installed within the tube. 3. The pipe can transmit heat to its tip which is plugged into the collector`s heat transfer manifold. Then heat is transferred from the copper heat pipe to the water when water runs through the manifold. Features of Heat Pipe Solar Collector 1. The heat pipe can heat water rapidly. 2. There is no water in the vacuum tube, so the tube will not break in the winter. 3. With a pleasing appearance, this evacuated tube collector is compatible with the architecture. 4. It can be integrated with existing pipeline. 5. The solar collector, unsuitable for hard water, will be affected by the local water quality. 6. It still can in the event of occasional tube breakages.

Sunrain solar water heater _ pre-heated with copper coil

Pre-heated Solar Water Heater Material of Pre-heated Solar Water Heater 1) Inner tank: stainless steel--0.60mm. 2) Vacuum tube: QB-AL-N/AL-58-2000 and 58-2300. 3) Outer tank: painted steel-0.4mm; stainless steel SUS304-0.4mm. 4) Frame: coated galvanized steel-1.5mm; stainless steel SUS430-1.5mm. 5) The material of insulation: polyurethane 50mm. 6) The reflector: aluminum component; AL99.85% surface oxidation. 7) Copper coil: Ø12mm, thickness 0.8mm. Features of Pre-heated Solar Water Heater: 1. Cold water can be rapidly heated 2. Adopting direct exchanging heat mode, this solar hot water heater can offer enough hot water for you. 3. Suitable area: daily needs for hot water of varied families 4. Simple and convenient to use: adopting the state-of-the-art design and high efficient pre-heated patent technique, this solar hot water heater can quickly warm cold water as it flows through special pipe. 5. More capacity.

Sunrain solar heating system

Solar Heating System The Details of Solar Heating System 1. Inner tank: stainless steel SUS304-0.5mm 2. Outer tank: painted steel-0.4mm 3. Collector angle: 30 degree 4. Vacuum tube: QB-AL-N/AL-47-1500mm/58-1800mm 5. Generally speaking, we don`t supply frame(But we provide galvanized angle iron frame or others, on request)