Linetronic Technologies SA products

The sample is cooled down according to the methods and when the preselected temperature is reached a vacuum of 20 mBar is automatically applied to the sample. The product is sucked through the filter into the calibrated aspiration pipette. If the sample takes more than 60 seconds to reach the upper barrier detector (during the aspiration phase), or it fails to return completely into the test jar before that the product has cooled by a further 1°C, the Cold Filter Plugging Point is reached.

Determination of Filter Blocking Tendency (FBT) of distillate fuel oils where the end use demands an exceptional degree of cleanliness. This test method is applicable to fuels within the viscosity range of 1.50 to 6.00 mm²/s (cSt) at 40°C. Test range 1.0-30 (FBT/FTP). Filterability of middle distillate fuel oils within the viscosity range from 1.70 to 6.20 mm²/s (cSt) at 40°C. Test range100-1(F-QF).

This test method covers estimating the filterability of diesel fuels in some automotive equipment at low temperatures. The Low Temperature Flow Test results are indicative of the low temperature flow performance of the test fuel in some diesel vehicles. The test method is especially useful for the evaluation of fuels containing flow improver additives in a range of +10°C … -30°C.

Freezing Point of aviation fuels, aviation gasoline, aviation turbine fuels, engine coolants, antifreeze products, brake fluids, … Solidification Point of Benzene. Solidification Point of Industrial Organic Chemicals.

Laboratory mini steam generator. Table top version with small footprint only 26 × 30 × 37 centimetres, small weight (empty) 7.4 kg.

Professional natural or forced ventilation oven suitable for all thermostatic applications where a specific precision is needed. Outer body in steel coated in epoxy anti-acid paint. Inner structure in stainless steel AISI 304 with rounded corners. Double insulation door with silicone seal to prevent heat loss. Thermal insulation with mineral fibre.