MidNite Solar products

MidNite’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure.

MidNite`s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.

50 amp 300VDC din rail mount ground fault protector (NRTL listed breaker assembly). Use this assembly on PV circuits that operate up to 300VDC when required. NEC2008 requires DC-GFP`s on all Solar installations.

The Classic 150 MPPT Charge Controller is MidNite Solar`s most popular model. It has Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes. The Classic 150 has a maximum output current of 96 amps, an operating voltage of 150 volts and works with 12 to 72 volt battery systems. The FREE MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet. As with the whole Classic Line, the Classic 150 has MidNite’s exclusive HyperVOC which extends VOC limits when needed.

The Classic 150 MPPT Charge Controller is MidNite Solar`s most popular model. It has Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes. The Classic 150 has a maximum output current of 96 amps, an operating voltage of 150 volts and works with 12 to 72 volt battery systems. The FREE MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet. As with the whole Classic Line, the Classic 150 has MidNite’s exclusive HyperVOC which extends VOC limits when needed.

The BRAT Charge Controller sold individually ($125.00) or in packs of 10 ($1190.00). The Brat is simply the most versatile solar controller in its class. The Brat is a finely-tuned solar PWM charger capable of providing up to 30 Amps of charging current, with class-leading lighting and load control features including one-of-a-kind Solar Clock.

Midnite BRAT PWM charge controller. Midnite BIG BABY box. 1 of our Midnite MNEPV10 breakers for the load output. 1 of our Midnite MNEPV20 breakers for the PV input. 1 of our Midnite MNEPV30 breakers for the battery output. Conduit and adapters. Wire and strain reliefs ETC. Built in Arlington, WA USA. Warranty - 5 yrs.. Brat charge controller KIT, With breakers and wire etc.

The Series E3P three-phase relays are designed for all types of loads. The design incorporates a thyristor output. Control status LED is a standard on all models. Output protection is provided internally on certain models. The Series E3P utilizes optical isolation to protect the control from load transients. High-current models are excellent for motor control. 25 amp, 600 vac 3 phase relay.

The Series E3P three-phase relays are designed for all types of loads. The design incorporates a thyristor output. Control status LED is a standard on all models. Output protection is provided internally on certain models. The Series E3P utilizes optical isolation to protect the control from load transients. High-current models are excellent for motor control. 75 amp 600 vac 3 phase relay
Requires Heat sink. Warranty - 5 yrs.

The Series E3P three-phase relays are designed for all types of loads. The design incorporates a thyristor output. Control status LED is a standard on all models. Output protection is provided internally on certain models. The Series E3P utilizes optical isolation to protect the control from load transients. High-current models are excellent for motor control.